International Journal of Composite Materials and Matrices

The Potential Application of Walnut Shells as Biofillers for Natural Rubber Composites

  1. H I Oregbeme ✉
  2. O K. Eguare
  3. A O. Abiodun
  4. D M. Ayo

Abstract

It was evaluated whether walnut shells should be used as filler in composites made of natural rubber. Samples of walnut shells were ground to fine powders, sieved through a 75 μm mesh, and were used in compounding natural rubber using varying filler loading of unfilled, 20 hpr, 30 hpr, 40 hpr, and 50 hpr. The physicochemical analysis results of the walnut shell powder were 5.30, 10.10%, 2.50%, 43.70%, 49.70 mg/g, and 50.75 g/100 g for pH, moisture content, ash content loss of ignition and iodine adsorption number respectively. While the values obtained for the carbon black were 6.30, 2.89%, 6.35%, 92.90%, 79.88 mg/g, and 54.0 g/100 g for pH, moisture content, ash content loss of ignition and iodine adsorption number respectively. These properties include tensile strength, hardness, abrasion resistance, and compression set. The result shows that walnut shell-filled composite has a high reinforcement at filler loading of 30-40 phr and at a certain higher level it only acts as a diluent. In addition, the walnut shell is grouped as a semi-reinforcing filler having an absorption number of 49.70 mg/g which is about half the value of carbon black.

References (15)

  1. Ayo MD, Madafor IC, Ekebafe IO, Chukwu MN. Effect of carbonization temperature on the mechanical and swollen behavior of natural filled groundnut shell. Researcher. 2010;3:11.
  2. Imanah JE, Okiemen FE. Studies in the mechanical properties of natural rubber with agricultural by-products. J.CSN. 2004:317–22.
  3. Ekebafe IO, Ayo MD, Eguare KO, Ugbesia SO. Effect of chemical modification of powdered rubber seed shell as filler on the tensile properties of natural rubber compounds. J Polym Sci Technol. 2010:1113–9.
  4. Asore JE. Introduction to rubber technology. Benin City: Joseg Books Publisher; 2000. p. 20–5.
  5. Dhillon INS. Fruit production in India Nerendra Publications House, Delhi – 11006. India; 2013.
  6. Ishak ZAM, Baker AA. Natural rubber blends and properties. Eur Polym J. 1995;31(3):259–69.
  7. ASTMD 1509, (1983): Standard methods of testing moisture content.
  8. ASTMD 7348, (1983): Standard methods for testing heat loss/ ash content.
  9. ASTMD 1510, (1983): Methods of testing iodine adsorption number
  10. ASTM D281-12 (2012) Standard Test Methods for oil Absorption.
  11. Calaxton W.E content F.S: Continuous cure rate of rubber. ASTM symposium. 1964
  12. ASTMD 1415, (1983): Standard method for testing for hardness.
  13. ASTM D395-03 (2003): standard method for compression testing
  14. ASTMD 385, (1983): standard method for testing for compressing set for rubber vulcanization
  15. ISO 4649, (1948): standard method of testing Abrasion resistance of cured compound mixes.

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support