International Journal of Energetic Materials

Decision Methodology for Site Suitability Index – A Combinatorics Approach

  1. Satyapal .
  2. Tarun Kumar Kurmi
  3. Nikhil Dev ✉

Abstract

Installation and operation of a power plant is dependent upon a large number of parameters which are interdependent. In the present work a methodology based upon the combination of digraph development, matrix representation and computational solution is applied on the problem of site selection for power plant is developed. The aim of present work is the factor identification and methodology development for decision making. This paper identifies various parameters affecting the real time situation. All these parameters are interacting with each other by different amounts. An attempt has been made to develop a mathematical model of SSPP from these interacting parameters using GTA. These parameters are interdependent. For the peer group selection maximum value is compared with real time value. Value of relative SSPP comes out to be 34.41%. From the GTA it came out that with decrease in Availability of Water, relative is decreased from 38.51 to 34.41%. Keywords: digraph, graph theory, parameters, permanent function

References (382)

  1. Dev N., Samsher, Kachhwaha S.S.
  2. Computational analysis of dual
  3. pressure non-reheat combined-cycle
  4. power plant with change in drum
  5. pressures, Int J Appl Eng Res. 2010;
  6. Dev N., Samsher, Kachhwaha S.S.
  7. Graph theoretic assessment of critical
  8. component in combined-cycle power
  9. plant, Int J Eng Stud. 2012; 4(1): 1–
  10. Dev N., Attri R., Mittal V., et al.
  11. Thermodynamic analysis of a
  12. combined heat and power system, Res
  13. J Recent Sci. 2012; 1(3): 76–9p.
  14. Attri R., Grover S., Dev N., et al. An
  15. ISM approach for modelling the
  16. enablers in the implementation of Total
  17. Productivity Maintenance (TPM), Int J
  18. Syst Assur Eng Manage. DOI
  19. 1007/s13198-012-0088-7.
  20. Dev N., Attri R., Mittal V., et al.
  21. Economic and thermal analysis of
  22. thermal system, Res J Recent Sci.
  23. Dev N., Samsher, Kachhwaha S.S.
  24. System modeling and analysis of a
  25. combined cycle power plant, Int J Syst
  26. Assur Eng Manage. 2013; 4(4): 353–
  27. Dev N., Samsher, Kachhwaha S.S., et
  28. al. GTA-based framework for
  29. evaluating the role of design
  30. parameters in cogeneration cycle
  31. power plant efficiency, Ain Shams Eng
  32. J. 2013; 4: 273–84p.
  33. Dev N., Samsher, Kachhwaha S.S., et
  34. al. Exergy analysis and simulation of a
  35. MW cogeneration cycle, Front
  36. Mech Eng. 2013; 8(2): 169–80p.
  37. Attri R., Dev N., Sharma V. Graph
  38. theoretic approach (GTA) – A Multi
  39. Attribute Decision Making (MADM)
  40. Technique, Res J Recent Sci. 2013;
  41. Dev N., Attri R., Sharma V., et al.
  42. Development of Graph theoretic
  43. model for economic analysis of
  44. combined heat and power system, Int
  45. J Manage Behav Sci. 2013; (04): 166–
  46. Dev N., Attri R., Sharma V., et al.
  47. Economic analysis of a cogeneration
  48. cycle power plant, Int J Manage
  49. Behav Sci. 2013; (04): 184–9p.
  50. Dev N., Attri R. System modeling and
  51. analysis of gas turbine power plant
  52. using Graph Theoretic Approach, Int J
  53. Energy, Environ Econ. 2013; 21(1):
  54. Dev N., Samsher, Kachhwaha S.S., et
  55. al. Effect of inlet air temperature on
  56. the performance of combined heat and
  57. power system, Int J Energy, Environ
  58. Econ. 2014; 22(1): 23–54p.
  59. Dev N., Samsher, Kachhwaha S.S., et
  60. al. Development of reliability index
  61. for combined cycle power plant using
  62. graph theoretic approach, Ain Shams
  63. Eng J. 2014; 5: 193–203p.
  64. Dev N., Samsher, Kachhwaha S.S., et
  65. al. “Development of reliability index
  66. for cogeneration cycle power plant
  67. using graph theoretic approach, Int J
  68. Syst Assur Eng Manage. DOI
  69. 1007/s13198-014-0235-4.
  70. Dev N., Samsher, Kachhwaha S.S., et
  71. al. GTA Modelling of combined cycle
  72. power plant efficiency analysis, Ain
  73. Shams Eng J. 2015; 6: 217–37p.
  74. Sharma A., Dev N., Attri R.
  75. Identification of factors for site
  76. selection of thermal power plant, Int J
  77. Adv Res Sci Eng. 2015; 3(01): 483–
  78. Sharma A., Dev N., Attri R., et al. Site
  79. selection for a thermal power plant
  80. using graph theory and matrix method,
  81. Int J Sci Res Dev. 2015; 3(3): 1796–
  82. Dev N., Attri R., Samsher. System
  83. modeling and analysis of a
  84. cogeneration cycle power plant using
  85. graph theoretic approach, Int J Recent
  86. Adv Mech Eng (IJMECH). 2015; 4(2):
  87. Dev N., Attri R. Analysis of combined
  88. heat and power system with lower
  89. optimum cycle pressure ratio, Int J
  90. Energy Environ Econ. 2014; 21(5-6):
  91. Attri R., Dev N. Performance analysis
  92. of combined cycle power plant, Front
  93. Energy. 9(4): 371–86p.
  94. DOI10.1007/s11708-015-0371-9.
  95. Dev N., Attri R. Comparative study of
  96. different combined cycle power plant
  97. schemes, Int J Recent Adv Mech Eng.
  98. ; 4(4): 67–75p.
  99. Dev N., Attri R., Malik S.
  100. Investigation of effect of process
  101. parameters on roller burnishing (RB)
  102. process using design of experiments, J
  103. Mach Form Technol. 2015; 7(1-2).
  104. Decision Methodology for Site Suitability Index Dev et al.
  105. Dev N. Analysis of single pressure
  106. combined cycle power plant with
  107. change in gas turbine operating
  108. parameters, J Prof Stud. 2010; 3(2):
  109. Dev N., Samsher, Kachhwaha S.S.
  110. Modeling and analysis of dual
  111. pressure non-reheat combined-cycle
  112. with change in drum pressures,
  113. Proceeding of International
  114. Conference on Advances in
  115. Mechanical Engineering. SVNIT,
  116. Surat, 04–06 January, 2010, 114–8p.
  117. Dev N. Analysis of single pressure
  118. combined cycle power plant with
  119. change in gas turbine operating
  120. parameters, Proceeding of National
  121. Conference on Emerging Trends in
  122. Power Systems and Energy
  123. Management. Lingaya’s University,
  124. Faridabad, 22–23 February, 2010, 6–
  125. Dev N. Energy sector in indian
  126. scenario – a study, Proceeding of
  127. National Conference on Emerging
  128. Trends in Power Systems and Energy
  129. Management. Lingaya’s University,
  130. Faridabad, 22–23 February, 2010, 10–
  131. Dev N., Samsher, Kachhwaha S.S., et
  132. al. Energy and exergy analysis of
  133. cogeneration cycle with change in gas
  134. turbine operating parameters,
  135. Proceeding of International
  136. Conference on Emerging
  137. Technologies for Sustainable
  138. Environment. AMU, Aligarh, 29–30
  139. October, 2010, 412–4p.
  140. Dev N., Samsher, Kachhwaha S.S., et
  141. al. A comparison of single and dual
  142. pressure steam extraction from steam
  143. turbine of combined cycle power
  144. plant, Proceeding of International
  145. Conference on Emerging Trends in
  146. Mechanical Engineering. Thapar
  147. University, Patiala, 24–26 February,
  148. Dev N., Samsher, Kachhwaha S.S., et
  149. al. Mathematical modeling and
  150. exergetic analysis of cogeneration
  151. cycle with change in gas turbine
  152. parameters, Proceeding of
  153. International Conference on
  154. Emerging Trends in Mechanical
  155. Engineering. Thapar University,
  156. Patiala, 24–26 February, 2011, 81p.
  157. Dev N., Samsher, Kachhwaha S.S. A
  158. study of combustion product
  159. concentration on gas turbine
  160. performance, Proceeding of
  161. International Conference CONIAPS2011.
  162. UPES, Dehradun, 14–16 June,
  163. Dev N., Samsher, Kachhwaha S.S.
  164. Simulation of gas turbine combustion
  165. chamber for CO2 emission
  166. minimization, Adv Intell Soft Comput.
  167. ; 131: 235–46p.
  168. Dev N., Samsher, Kachhwaha S.S., et
  169. al. Mathematical modelling and
  170. computer simulation of a combined
  171. cycle power plant, Adv Intell Soft
  172. Comput. 2011; 131: 341–50p.
  173. Dev N., Gupta A., Singh B., et al.
  174. Thermodynamics and the design,
  175. analysis and improvement of a 30
  176. MW CHP system, Proceeding of
  177. National Conference on Competitive
  178. Manufacturing: Strategies & Decision
  179. Support Systems, GLA University,
  180. Dev N., Samsher, Kachhwaha S.S., et
  181. al. A review of combined cycle power
  182. plant thermodynamic cycles,
  183. Proceedings of the National
  184. Conference TAME-2012. YMCA
  185. University of Science & Technology,
  186. Faridabad, 2012, 78–89p.
  187. Dev N., Attri R. Exergetic analysis of
  188. combustion chamber of a combined
  189. heat and power system, Proceedings
  190. of the National Conference TAME2012.
  191. YMCA University of Science &
  192. Technology, Faridabad, 2012, 180–7p.
  193. Dev N., Attri R. Factor identification
  194. and interrelations of micro and nano
  195. fluids in micro heat pipe performance,
  196. Symposium on Nanotechnology:
  197. Interdisciplinary Aspects.
  198. YMCAUST, 2012, 32p.
  199. Dev N., Attri R., Kumar K., et al.
  200. Effect of cycle pressure ratio on
  201. combustion product concentration and
  202. exergy destruction in combined heat
  203. and power system, Proceedings of
  204. International Conference on Smart
  205. Technologies for Mechanical
  206. Engineering. DTU, October 2013,
  207. Dev N., Attri R., Goyal G.P., et al.
  208. Exergetic analysis of combined cycle
  209. power plant with single steam
  210. extraction, GTINDIA2013-3740.
  211. doi:10.1115/GTINDIA2013-3740,
  212. ISBN: 978-0-7918-3516-1.
  213. Dev N., Attri R., Goyal G.P., et al.
  214. Graph theoretic analysis of advanced
  215. combined cycle power plants
  216. alternatives with latest gas turbines,
  217. GTINDIA2013-3760.
  218. doi:10.1115/GTINDIA2013-3760,
  219. ISBN: 978-0-7918-3516-1.
  220. Dev N., Attri R. Graph theoretic
  221. modelling of a gas turbine power
  222. plant, Proceeding of National
  223. Conference on Research Methodology
  224. & Advancement in Engineering and
  225. Science. Shanti Niketan College of
  226. Engineering, Hissar, 2013, 25–34p.
  227. Attri R., Dev N., Vikas. Identification
  228. of barriers in the implementation of
  229. ISO 9000, Handbook of Management,
  230. Technology and Social Sciences. Vol.
  231. , SEMS Publications; 2014, 89–92p,
  232. ISBN: 978-81-928926-2-7.
  233. Attri R., Dev N., Kalirawna A. A
  234. review paper on the barriers of quality
  235. circle (QC) programs implementation
  236. in manufacturing organisations: an
  237. Indian context, Handbook of
  238. Management, Technology and Social
  239. Sciences. Vol. 2, SEMS Publications;
  240. , pp 93–5p, ISBN: 978-81-
  241. Dev N., Attri R. Site selection for a
  242. power plant using graph theory and
  243. matrix method, Presented at AIMS-12
  244. International Conference. IIM
  245. Kojzikode, 02–05 January, 2015,
  246. –35p. ISBN: 978-81-924713-8-9.
  247. Dev N., Samsher, Kachhwaha S.S., et
  248. al. Analysis of Flow Effect in Steam
  249. Power Plant Using Graph Theory.
  250. NSPCEPII, Jindal Power Training
  251. Institute, Raigarh: National Seminar
  252. on Prospects and Challenges of
  253. Electrical Power Industry; 2015. ISBN
  254. -93-84743-43-7.
  255. Kumar M., Dev N., Attri R. System
  256. modeling and analysis of combustion
  257. product concentration and exergy
  258. destruction, Presented at International
  259. Conference and Exhibition on Cutting
  260. Edge Technological Challenges in
  261. Mechanical Engineering (CETCME2015).
  262. Noida Institute of Engineering
  263. and Technology, 21–22 March, 2015,
  264. Kumar M., Dev N., Attri R. Graph
  265. theoretic analysis on combustion
  266. system of internal combustion engine,
  267. Presented at International Conference
  268. and Exhibition on Cutting Edge
  269. Technological Challenges in
  270. Mechanical Engineering (CETCME2015).
  271. Noida Institute of Engineering
  272. and Technology, 21–22 March, 2015,
  273. Kumar M., Dev N., Attri R., et al.
  274. System modeling and analysis of
  275. combustion product concentration and
  276. exergy destruction, National
  277. Conference on Interdisciplinary
  278. Research in Science and Technology.
  279. LGVKSIMT, Faridabad, 17 April,
  280. , 163–73p (IRST-155E).
  281. Kumar M., Dev N., Attri R., et al.
  282. Modeling of combustion system using
  283. graph theory and matrix method,
  284. National Conference on
  285. Interdisciplinary Research in Science
  286. and Technology. LGVKSIMT,
  287. Faridabad, 17 April, 2015, 155–62p
  288. Decision Methodology for Site Suitability Index Dev et al.
  289. Dev N., Attri R. Combinatorics
  290. modeling of a combined heat and
  291. power system, All India Seminar on
  292. Advances in Engineering and
  293. Technology for Sustainable
  294. Development. G.B. Pant University of
  295. Agriculture and Technology, 12–13
  296. June, 2015, 177–83p.
  297. Dev N., Attri R. Evaluation of
  298. technical factors of grid
  299. interconnection Using graph theory
  300. and matrix method, All India Seminar
  301. on Advances in Engineering and
  302. Technology for Sustainable
  303. Development. G.B. Pant University of
  304. Agriculture and Technology, 12–13
  305. June, 2015, 241–7p.
  306. KumarM., Dev N., Attri R. Evaluation
  307. of an internal combustion engine with
  308. MADM technique, All India Seminar
  309. on Advances in Engineering and
  310. Technology for Sustainable
  311. Development. G.B. Pant University of
  312. Agriculture and Technology, 12–13
  313. June, 2015, 218–22p.
  314. Kumar M., Dev N., Attri R., et al.
  315. Applications of decision making
  316. techniques in energy systems – A
  317. review, All India Seminar on
  318. Advances in Engineering and
  319. Technology for Sustainable
  320. Development, G.B. Pant University of
  321. Agriculture and Technology, 12–13
  322. June, 2015, 171–6p.
  323. Kurmi T.K., Satyapal, Dev N.
  324. Evaluation of pulverization process of
  325. coal mill in steam power plant, All
  326. India Seminar on Advances in
  327. Engineering and Technology for
  328. Sustainable Development, G.B. Pant
  329. University of Agriculture and
  330. Technology, 12–13 June, 2015, 230–
  331. Kurmi T.K., Satyapal, Dev N.
  332. Modeling of steam power plant
  333. structure for graph theoretic analysis,
  334. All India Seminar on Advances in
  335. Engineering and Technology for
  336. Sustainable Development. G.B. Pant
  337. University of Agriculture and
  338. Technology, 12–13 June, 2015, 260–
  339. Dev N., Attri R. Combinetorics
  340. approach based methodology
  341. development for power plant site
  342. selection, Management Challenges in
  343. Uncertain Environment. ISBN-978-1-
  344. -01-2, chapter-35, 241–9p.
  345. Attri R., Dev N. Collaborative
  346. product development in power plant
  347. organisation: modeling the critical
  348. success factors using ISM-MICMAC
  349. approach, National Seminar on Best
  350. Practices for Power Generation,
  351. Transmission and Distribution. Jindal
  352. Institute of Power Technology, 06–07
  353. January, 2016, 225–33p.
  354. Dev N. Performance factor
  355. identification of a hydrogen based
  356. energy conversion system, National
  357. seminar on best practices for power
  358. generation, transmission and
  359. distribution. Jindal Institute of Power
  360. Technology, 06–07 January, 2016,
  361. Dev N. Evaluation and selection of a
  362. fuel cell using multi-attribute decision
  363. making technique, National Seminar
  364. on Best Practices for Power
  365. Generation, Transmission and
  366. Distribution. Jindal Institute of Power
  367. Technology, 06–07 January, 2016,
  368. Dev N., Chauhan L.C. Factor
  369. identification of steam turbine
  370. performance parameters for combined
  371. cycle application, National Seminar
  372. on Best Practices for Power
  373. Generation, Transmission and
  374. Distribution. Jindal Institute of Power
  375. Technology, 06–07 January, 2016,
  376. Dev N., Samsher. System structure
  377. development for the analysis of flow
  378. effect in a steam power plant,
  379. National seminar on best practices for
  380. power generation, transmission and
  381. distribution, Jindal Institute of Power
  382. Technology, 06–07 January, 2016,

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support