International Journal of Electrical Power System and Technology

POWER PLANT MODEL VALIDATION FOR IMPROVING SYSTEM RELIABILITY AND SECURITY

  1. K Sravanthi ✉
  2. Dr. K Durga Syam Prasad

Abstract

Model that represents virtually all practical systems. Power system models are used to demonstrate the systemperformance studies such as generation, load growth estimation, operating limits calculation and (SIPS) system integrityprotective schemes performance computations and all this study depends upon an exact mathematical model representation of thetrans- mission system, generation system and load model. Comparison of performance data of the power system model with theactual system measured data called power system model validation. These Model are needed to validate regularly but practicallythis does not happen. So that the studies derived from these models are not accurate if any model does not show a reasonableobserved phenomenon on the power system.Present work is to investigate the importance of power plant model validation and to examine the state of model validationimplementation and to propose the improvements. Model validation is a crucial process for maintain system reliability and systemsecurity. One of the basic approaches to the model validation is system wide simulation where the active and reactive powers, orvoltage magnitude and frequencies can be compared with the measured data and error can be optimized with sum squared error.This procedure is to outlook as top-down proceed towards verification and comparisons with data measured indicates the qualityof overall model and investigation of the dissimilarity between measured data and simulation data demonstrate which componentin subsystem models need to be revalidate.

References (10)

  1. Eric Allen, DN Kosterev, and Pouyan Pourbeik. Validation of power system models. In Power and Energy Society General
  2. Meeting, 2010 IEEE.
  3. www.nerc.com, NERC White Paper Power System Model Validation December 2010.
  4. I. C. Decker, A. S. e Silva, R. J. G. da Silva, M.N. Agostini, N. Martins, and F. B Prioste. System Wide Model
  5. Validation of the Brazilian Interconnected Power System. In IEEE PES General Meeting. IEEE, July 2010.
  6. J-P Barret, Pierre Bornard, Bruno Meyer, and Bruno Meyer. Power system simulation. Springer, 1997.
  7. Power System Control and Stability Second Edition
  8. P. M. Anderson San Diego, California. A. A. Fouad Fort Collins, Colorado
  9. J. Heyberger and L. Vanfretti. Requirements for validation of Phasor Time domain simulations. Technical report, I Tesla,
  10. MOD-033-1. Steady-State and Dynamic System Model Validation. Standard, NERC, July 2017.

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support