International Journal of Mechanics and Design

Analysis of Elastic and Elasto-Plastic Behaviour of A588 Structural Steel Beam

  1. D. Logendran ✉
  2. V.C. Sathish Gandhi
  3. R. Kumaravelan
  4. S. Manoj

Abstract

In the present work, an elastic and elasto-plastic behaviour of ASTM A588 structural beam of I-section has been carried out. The cantilever beam model of I-cross section has been created in the finite element simulation software ABAQUS. In the elastic behaviour study, the model has been simulated in the elastic region. After that, the model has been extended to an elasto- plastic analysis by incorporating the plastic strain in the analysis. The various parameters such as von Mises stress, spatial displacement, plastic strain component and reaction force at the fixed end are studied. The result shows that the reaction force is maximum at the fixed end and the maximum displacement at the free end of the beam. The maximum plastic strain occurred near the fixed end and the minimum plastic strain in the free end. It is also observed that in an elasto-plastic analysis the plastic strain is dominated the elastic strain in the same location in a beam. Due to this the facture occurs in that locations.

Keywords

References (13)

  1. Deepak JR, Raja VB, Anandapadmanaban V, et al. Experimental investigation, and finite element analysis of thermal distribution in heat affected zone of a588 steel during GMAW. International Journal of Advances in Engineering Research. 2015;9(6):1–5.
  2. http://www.cortensteelsupplier.com/ ASTM/A588-Gr-A.html
  3. Kr. Swatantra Porwal and Kr. Pradeep. Stress analysis of a structural member using finite element method. VSRD International Journal of Mechanical, Auto. & Prod. Engg. 2011;1(3):104–109.
  4. Beléndez T, Neipp C, Beléndez A. Large and small deflections of a cantilever beam. European journal of physics. 2002;8;23(3):371.
  5. Kocatürk T, Akbaş ŞD, Şimşek M. Large deflection static analysis of a cantilever beam subjected to a point load. International Journal of
  6. Engineering and Applied Sciences. 2010;2(4):1–3.
  7. Kimiaeifar A, Tolou N, Barari A, et al. Large deflection analysis of cantilever beam under end point and distributed loads. Journal of the Chinese Institute of Engineers. 2014;37(4):438–45.
  8. https://www.google.co.in/search?q=S MC+standard+i+beam+sizes+in+india
  9. Gandhi VCS, Ramesh S, Kumaravelan R, et al. Contact analysis of spherical ball and a deformable flat model with the effect of tangent modulus. Structural Engineering and Mechanics. 2012;44(1):61–72.
  10. Hong Z, Qiong L, Jian Z, et al. Finite element analysis of some anchor windlass based on Abaqus. Future communication, computing, control and management 2012:343–347
  11. Gandhi VCS, Kumaravelan R, Ramesh S. Performance analysis of spherical indentation process during loading and unloading-a contact mechanics approach. Structural Engineering and Mechanics. 2014; 52(3):469–83.
  12. Bastin B, Adars S, Madhu A, et al. Finite element analysis of wheel rim using Abaqus software. int. journal of engineering research and application, 2017;(2–1):31–34.
  13. Kumaravelan R, Tamilselvam P, Gandhi VCS, et al. Analysis of contact parameters in the sphere and flat contact model by flattening approach. oxidation communications. 2013;3 6(4):1202–16.

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support