International Journal of Nanomaterials and Nanostructures

Effect of Compatibilizers on Polypropylene-Based Peanut Shell Flour Composites Reinforced with Nanoclay

  1. Haydar Zaman ✉

Abstract

The improvement of innovative ingredients is on the rise, especially in the automobile, aerospace, aviation, and construction industries. Conventional ingredients are being substituted with nanocomposite ingredients due to their excellent features. In this study, various composites based on polypropylene (PP), peanut shell flour (50 wt% PSF), and nanoclay (Cloisite 30B) were manufactured by melt mixing process followed by injection molded in the presence of maleated PP (PPM) and maleated styrene ethylene-co-butylene styrene block copolymer (SEBSM) as compatibilizing agents at concentrations of 1, 3, and 5 wt%. Subsequently, the effects of the compatibilizer and nanoclay contents (1, 3, and 5 wt%) on the mechanical, morphological, and physical features of nanocomposites were identified. The nanocomposite ingredients were made bymelting the mixture in a twin-screw extruder with a spindle speed of 50 rpm with different region temperatures. Melt mixing is one of the excellent methods for making nanocomposites. This method makes it easy to mix nanoclay and matrix components to manufacture samples for various tests. It was found that the inclusion of PPM to PSF increased the tensile strength of the PP/PSF composite by 59% and the reverse-notch Izod impact strength increased by 151%, leaving the modulus essentially unchanged. In contrast, SEBSM had a larger effect on impact strength but in addition to a smaller effect on tensile strength; modulus was reduced. On adding both PPM and SEBSM to PP/PSF composites, the impact strength enhanced by 2.6 times, but the tensile strength did not decrease. Since nanoclay additions increase the modulus of PP/PSF composites without reducing the impact strength, the use of three additives gives the possibility of making PP/PSF composites with higher modulus and higher impact strength.

Keywords

References (80)

  1. Sathishkumar, T.P., et al. "Characterization of natural fiber and composites–A review." Journal of
  2. Reinforced Plastics and Composites 32.19 (2013): 1457–1476.
  3. Thakur, Vijay Kumar, Manju Kumari Thakur, and Raju Kumar Gupta. "Raw natural fiber–based
  4. polymer composites." International Journal of Polymer Analysis and Characterization 19.3
  5. (2014): 256–271.
  6. Ramamoorthy, Sunil Kumar, Mikael Skrifvars, and Anders Persson. "A review of natural fibers
  7. used in biocomposites: Plant, animal and regenerated cellulose fibers." Polymer reviews 55.1
  8. (2015): 107–162.
  9. Zaman, Haydar, and Ruhul Amin Khan. "Surface Modification of Plant-Drive Calotropis
  10. Gigantea Fiber Reinforced Polypropylene Composites." Progress in Applied Science and
  11. Technology 12.1 (2022): 23–35.
  12. Zaman, Haydar U., and Ruhul A. Khan. "Surface Modified Benzoylated Okra (Abelmoschus
  13. esculentus) Bast Fiber Reinforced Polypropylene Composites." Advanced Journal of Science and
  14. Engineering 3.1 (2022): 7–17.
  15. Zaman, Haydar U., Ruhul A. Khan, and A.M.S. Chowdhury. "The improvement of
  16. physicomechanical, flame retardant, and thermal properties of lignocellulosic material filled
  17. polymer composites." Journal of Thermoplastic Composite Materials (2021):
  18. Prabhakar, M.N., et al. "Mechanical and thermal properties of epoxy composites reinforced with
  19. waste peanut shell powder as a bio-filler." Fibers and Polymers 16.5 (2015): 1119–1124.
  20. Kazayawoko, M., J.J. Balatinecz, and L.M. Matuana. "Surface modification and adhesion
  21. mechanisms in woodfiber-polypropylene composites." Journal of materials science 34.24 (1999):
  22. Rosa, Simone ML, Sônia Nachtigall, and Carlos A. Ferreira. "Thermal and dynamic-mechanical
  23. characterization of rice-husk filled polypropylene composites." Macromolecular Research 17.1
  24. Zaaba, Nor Fasihah, Hanafi Ismail, and Mariatti Jaafar. "The effects of modifying peanut shell
  25. powder with polyvinyl alcohol on the properties of recycled polypropylene and peanut shell
  26. powder composites." BioResources 9.2 (2014): 2128–2142.
  27. Zaman, Haydar U., and Ruhul A. Khan. "Acetylation used for natural fiber/polymer composites."
  28. Journal of Thermoplastic Composite Materials 34.1 (2021): 3–23.
  29. Zaman, Haydar U., and M.D.H. Beg. "Effect of coir fiber content and compatibilizer on the
  30. properties of unidirectional coir fiber/polypropylene composites." Fibers and polymers 15.4
  31. (2014): 831–838.
  32. Lai, Sun‐M., et al. "Comparative study of maleated polyolefins as compatibilizers for
  33. polyethylene/wood flour composites." Journal of Applied Polymer Science 87.3 (2003): 487–496.
  34. Maldas, D., and B.V. Kokta. "Role of coupling agents on the performance of woodflour-filled
  35. polypropylene composites." International Journal of Polymeric Materials 27.1-2 (1994): 77–88.
  36. Beckermann, Gareth. Performance of hemp-fibre reinforced polypropylene composite materials.
  37. Diss. The University of Waikato, 2007.
  38. Huang, J. J., H. Keskkula, and D. R. Paul. "Comparison of the toughening behavior of nylon 6
  39. versus an amorphous polyamide using various maleated elastomers." Polymer 47.2 (2006):
  40. Oksman, Kristiina, and Henrik Lindberg. "Influence of thermoplastic elastomers on adhesion in
  41. polyethylene–wood flour composites." Journal of Applied Polymer Science 68.11 (1998):
  42. Wilson, Kermit, et al. "Select metal adsorption by activated carbon made from peanut shells."
  43. Bioresource technology 97.18 (2006): 2266–2270.
  44. Mohanty, A.K., M. and Misra, and G.I. Hinrichsen. "Biofibres, biodegradable polymers and
  45. biocomposites: An overview." Macromolecular materials and Engineering 276.1 (2000): 1–24.
  46. Rubin, Edward M. "Genomics of cellulosic biofuels." Nature 454.7206 (2008): 841–845.
  47. Biswal, Manoranjan, Smita Mohanty, and Sanjay K. Nayak. "Influence of organically modified
  48. nanoclay on the performance of pineapple leaf fiber‐reinforced polypropylene nanocomposites."
  49. Journal of Applied Polymer Science 114.6 (2009): 4091–4103.
  50. Rodríguez‐Llamazares, Saddys, et al. "The effect of clay type and of clay–masterbatch product
  51. in the preparation of polypropylene/clay nanocomposites." Journal of Applied Polymer Science
  52. 3 (2011): 2013–2025.
  53. Yeh, Shu‐Kai, and Rakesh K. Gupta. "Nanoclay‐reinforced, polypropylene‐based
  54. wood–plastic composites." Polymer Engineering & Science 50.10 (2010): 2013–2020.
  55. Ferreira, J.A.M., et al. "A study of the mechanical properties on polypropylene enhanced by
  56. surface treated nanoclays." Composites Part B: Engineering 42.6 (2011): 1366–1372.
  57. Li, Qingxiu, and Laurent M. Matuana. "Surface of cellulosic materials modified with
  58. functionalized polyethylene coupling agents." Journal of Applied Polymer Science 88.2 (2003):
  59. Oksman, Kristiina, and Craig Clemons. "Mechanical properties and morphology of impact
  60. modified polypropylene–wood flour composites." Journal of applied polymer science 67.9
  61. (1998): 1503–1513.
  62. Ishak, ZA Mohd, W.S. Chow, and T. Takeichi. "Influence of SEBS-g-MA on morphology,
  63. mechanical, and thermal properties of PA6/PP/organoclay nanocomposites." European Polymer
  64. Journal 44.4 (2008): 1023–1039.
  65. Cao, Xuan Viet, et al. "Mechanical properties and water absorption of kenaf powder filled
  66. recycled high-density polyethylene/natural rubber biocomposites using MAPE as a
  67. compatibilizer." BioResources 6.3 (2011): 3260–3271.
  68. Nourbakhsh, Amir, Foad Farhani Baghlani, and Alireza Ashori. "Nano-SiO2 filled rice
  69. husk/polypropylene composites: Physico-mechanical properties." Industrial Crops and Products
  70. 1 (2011): 183–187.
  71. Alexandre, Benjamin, et al. "Nanocomposite-based polyamide 12/montmorillonite: relationships
  72. between structures and transport properties." Desalination 199.1–3 (2006): 164–166.
  73. Deka, Biplab K., and T.K. Maji. "Effect of coupling agent and nanoclay on properties of HDPE,
  74. LDPE, PP, PVC blend and Phargamites karka nanocomposite." Composites science and
  75. technology 70.12 (2010): 1755–1761.
  76. Lee, Hongkwan, and Dae Su Kim. "Preparation and physical properties of
  77. wood/polypropylene/clay nanocomposites." Journal of Applied Polymer Science 111.6 (2009):
  78. Valente, Marco, et al. "Hybrid recycled glass fiber/wood flour thermoplastic composites:
  79. Manufacturing and mechanical characterization." Composites Part A: Applied Science and
  80. Manufacturing 42.6 (2011): 649–657.

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support