International Journal of Renewable Energy and its Commercialization

Parametric Analysis of Ribbed Channels for Gas Turbine Engines

  1. Vivek Pratap Singh ✉
  2. Dharamveer Singh
  3. Ashok Kumar Yadav

Abstract

This work uses experimental data to validate a ribbed surface that is computationally examined interior passageway of a static blade on a turbine. to replicate an illustration from a released publication while researching the Computational Fluid Dynamic conjugated heat transmission. The turbulence simulation matched the most closely. Publicly available physical practical results were found by working on Ansys Workbench. Convective heat exchange efficiencies additionally to stress profiles utilizing those computationally variables and CFD results were compared to confirm the internal experimentation rig. By separating and reconnecting the boundary layers to increase heat transmission, this cooling method enhances turbulent mixing in addition to a smooth channel. The overall goal is to evaluate a realistic cooling method by considering into account efficient transfer of heat rates, channel pressure drop reduction, and flow thermodynamics. The V2f turbulent model generated the results that were most similar to the experimental findings. For internal testing, however, the turbulence model of EB-k type was chosen due to its unpredictability at high Reynolds numbers. Between the ribs, more compact reattachment lengths and greater values of Nusselt number were the outcomes for EB-k turbulence. Both the heat transmission and friction components meet the given results' respective thresholds of uncertainty of 6.8% and 6.66%. Benchmark computing outcomes will confirm the validity of the practical settings for future enhancement and testing of the different rib arrangement configurations

References (11)

  1. Chandra, P. R., Alexander, C. R., & Han, J. C. (n.d.). Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls. www.elsevier.com/locate/ijhmt
  2. Davis, P. L., Rinehimer, A. T., & Uddin, M. (2012). A Comparison of RANS-Based Turbulence Modeling for Flow over a Wall-Mounted Square Cylinder. https://www.researchgate.net/ publication/288670076
  3. Dhanasekaran, T. S., & Wang, T. (2013). Computational analysis of mist/air cooling in a two-pass rectangular rotating channel with 45-deg angled rib turbulators. International Journal of Heat and
  4. Mass Transfer, 61(1), 554–564. https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.006
  5. Etminan, A., Jafarizadeh, H., Moosavi, M., & Akramian, K. (2012). Determination of flow characteristics and turbulent heat transfer in a ribbed roughened square duct, part 1: Turbulence
  6. models. Applied Mechanics and Materials, 110–116, 2359–2363. https://doi.org/10.4028/www.scientific.net/AMM.110-116.2359
  7. Florschuetz, L. W., Metzger, D. E., & Truman, C. R. (1981). NASA Contractor Report 3373 NASA CR 3373 c.1 J et Array Impingement with Crossflow-Correlation of Streamwise Resolved Flow and Heat Transfer Distributions.
  8. Flynt, G. A., Briley, W. R., Mcfarland, E., Sutton, W. H., & Ainsworth, J. (n.d.). computation of heat transfer in turbine rotor blade cooling channels with angled rib turbulators.
  9. Singh, V. P., Singh, D., & Kumar, A. (2022). Analytical Investigation of Ribbed Channels for Gas Turbine. 7, 1680. www.ijrti.org
  10. Singh, V. P., Singh, D., & Yadav, A. K. (2023). Cfd Analysis of A 3d Modelled Shell & Tube Heat Exchanger Section A-Research Paper Eur. Chem. Bull, 2023, 4304–4313. https://doi.org/10.48047/ecb/2023.12.si10.00494
  11. Taylor, J. R. (1980). Heat Transfer Phenomena in Gas Turbines. http://asmedigitalcollection.asme.org/GT/proceedings-pdf/GT1980/79665/V01BT02A078/2393286/v01bt02a078-80-gt172.pdf

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support