International Journal of Metallurgy and Alloys
Volume 5, Issue 1 (2019)
Published
Table of contents
-
Application of Radio Frequency Identification (RFID) in traceability
Abstract: RFID is an emerging technology along with the Industry 4.0 concept which provides a wide variety of applications. RFID technology with the integration of the Industry 4.0 concept gives so much advantage. This paper provides an overview about the RFID technology and the applications with Industry 4.0 concept. This paper also discussed some different viewpoints about the RFID technology. Key words: RFID, RFID technology, RFID applications, RFID antenna
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 1–4 Read article
-
Effects of Tungstate and Nitrite Ions as Corrosion Inhibitor for Cr-10Zr-10W Alloy in 0.5 M NaCl Solution
Abstract: The effect of different concentrations of tungstate and nitrite ions as corrosion inhibitors on the corrosion behavior of the sputter-deposited ternary Cr–10Zr–10W alloy was studied in 0.5 M NaCl solution open to air at 25±1°C using corrosion tests and corrosion potential measurement. The use of both the tungstate and nitrite ions enhanced the corrosion resistance properties of the alloy in 0.5 M NaCl solution. It is found that the tungstate …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 11–19 Read article
-
DIFFERENT METHODOLOGIES USED FOR PERFORMANCE ANALYSIS OF ORGANIC LIGHT EMITTING DIODE
Abstract: Organic Light Emitting Diode (OLED) is a Solid state lighting devices, the charge transporters must be infused from the anode and cathode yet the execution, lifetime, effectiveness and solidness of these devices are normally administered by the correct thickness of the material layers and terminal/organic interfaces at the anode contacts. This study we exhibit the approach using different thickness and doping of the material in Organic Light Emitting Diode. We …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 20–25 Read article
-
Root Cause Analysis and Maintenance in Mechanical Systems
Abstract: Due to lots of noise and failures in transmission system, for maintaining the status of products and services provided by any organisation it is very much necessary to improve the failure parts. The mechanism that transmits the power developed by engine of automobile to the engine to the driving wheel is called the Transmission System and it includes Clutch System, Gear Transmission System and Differential system. In the present work …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 26–29 Read article
-
Role of Materials in Safety and Reliability of Gas turbine System- A review
Abstract: Gas turbine systems maintenance is getting more and more significance. It is due to the application of availability based tariff (ABT) in power distribution market. As the requirement of electricity is increasing day by day therefore, maintenance demand is also increasing with time. In the present work a review on the modern gas turbine systems maintenance is presented with some case studies. Key Words: Gas turbine, maintenance, cost.
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 1, 2019 · pp. 5–10 Read article