International Journal of Metallurgy and Alloys
Volume 5, Issue 2 (2019)
Published
Table of contents
-
Essential of bearing in materials engineering
Abstract: Essentials of bearing have been to maintain lubricant film to prevent metal to metal contact and hence local welding of two surfaces. Tribological and mechanical properties have improved by powder metallurgy route of bearing fabrications. Alloyed non-ferrous plane bearings have better friction coefficients than pure metals. Betterment has appeared in babbit/ bronze particulate reinforced composites. Ni addition has improved performances of graphite-lead free tin bronze composite layers on surface of …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
ENHANCEMENT OF MECHANICAL PROPERTIES OF ALLOY 61S BY REINFORCING NANO COMPOSITES
Abstract: During recent decades, a lot of interest had shown in the materials production with nano sized grains. Especially, the aluminum alloys and its composites are widely used for demanding structural applications due to combination of corrosion resistance, formability, weldability and, mechanical properties. The demand for toughness, higher strength and, strength and weight ratio of aluminum alloys for the structural application is ever growing owing to the increasing importance of achieving …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 18–36 Read article
-
Service temperature attenuated materials
Abstract: Service temperatures in engineering materials have been one of important factors. It alone has not been only controlling variable for creep properties. Useful services from useful materials therefore have been more important within temperature ranges stipulated for certain services. Temperature ranges of interest to materials engineer have been ranged from cryogenic regions (- 200oC) to temperature of a tungsten-filament lamp (2000oC). This article has been description of materials from room …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 37–45 Read article
-
Effect of Antimony (Sb) incorporation on physical parameters of Te15 (Se100-xSbx)85 glassy alloys
Abstract: In the present study the physical parameters of Te15 (Se100-xSbx)85 glassy alloys prepared by melt quenching technique have been reported. The parameters viz. average coordination number (<r>), average number of constraints (Ncon), number of lone pair electrons (L), mean bond energy( <E>), cohesive energy (CE), average heat of atomization (Hs), glass transition temperature (Tg), density (ρ) and energy gap (Eg) were calculated theoretically for the glassy alloys. The mean bond …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 46–55 Read article
-
Organic Compound 5-(4-methoxybenzyl)-N-phenyl-1,3,4-thiadiazol-2-amine and NiS filler used to Mitigation the Corrosion of Mild steel and in Marine Atmosphere
Abstract: The concentration of chloride ions is higher in marine atmosphere. The bulk amount of mild steel uses in sea weather for different works. This metal is very sensitive in chloride ions. It produces hostile environment for mild steel. Chloride ions develop corrosion cell on the surface of mild steel and it changes their external and internal morphology as well as physical, chemical and mechanical properties. Mild steel exhibits corrosion reaction …
Published in International Journal of Metallurgy and Alloys · Vol. 5, Issue 2, 2019 · pp. 56–64 Read article