By: Isha Ramteke, Vaishnavi Khamankar, Prerna Meshram, Tejas Deshmukh, and Nikhil Badki
1-5Student, Department of Civil Engineering, KDK College of
Engineering, Nagpur, Maharashtra, India
It’s a structural behavior research was done on normal concrete because it possesses low tensile
strength shows cracking. The addition of fiber can enhance the compressive and tensile properties of
concrete. An experimental study was conducted to evaluate the compressive and tensile strength of
fiber-reinforced concrete, confirming the improvements in these mechanical properties. The various
aspects covered are compression test, split tensile strength, Effects of fibers on concrete. The study is
done on the comparison between nominal concrete and fiber reinforced concrete for that purpose
steel fiber is used as reinforcement as it has several characteristics other than any fiber. The test is
performed for m25 grade of concrete 12 cubes and 12 cylinders have been cast in which 6 are of
normal and other of steel fibers in the Specimens with fiber percentages of 0.9%, 1.2%, and 1.5%
were tested for compressive strength and split tensile strength at intervals of 3, 7, and 28 days after
casting. The results of the test shows steel fiber reinforced concrete showing better strength in both
compression and tension than nominal concrete there is increase in the strength as increase in the
dosage of steel fibers. After 28 days of test it is been clear that Fibers can be used as reinforcement
with normal concrete.
Citation:
Refrences:
1. Mohamed AM, Tayeh BA. Exploring the performance of steel fibre reinforced lightweight
concrete: a case study review. Case Stud Constr Mater. 2023; 18: e01968.
2. Bhaladhare BR, Hadge PN. Fibre reinforced concrete–a case study. Int Res J Eng Technol. 2020;
7 (9): 1530–1534.
3. Joshi A, Reddy P, Kumar P. Experimental work on steel fibre reinforced concrete. Int J Sci Eng
Res. 2016; 7 (10): 90–95.
4. Shweta P, Kavilkar R. Study of flexural strength in steel fibre reinforced concrete. Int J Recent
Dev Eng Technol. 2014; 2 (5): 52–55.
5. Srinivasarao K, Rakeshkumar S. Comparison of performance of standard concrete and fibre
reinforced standard concrete exposed to elevated temperatures. Am J Eng Res. 2013; 2 (3): 17–21.
6. Mohod MV. Performance of steel fiber reinforced concrete. Int J Eng Sci. 2012; 1 (12): 1–4.
7. Shende M, Pande AM. Experimental study on steel fibre reinforced concrete for M-40 grade. Int
Ref J Eng Sci. 2012; 1 (1): 43–48.
8. Vairagade VS, Kene KS, Deshpande NV. Investigation of steel fiber reinforced concrete on
compressive and tensile strength. Int J Eng Res Technol. 2012; 1 (3): 1–7.
