International Journal of Structural Engineering and Analysis Research Article

Assessment of M30 Concrete Compressive Strength Using Digital Rebound Hammer and Destructive Testing

  1. S. K. Katariya ✉ 1Associate Professor, Department of Civil Engineering, College of Technology, G.B.P.U.A. & T., Pantnagar, Uttarakhand, India
  2. Abhishek Prasad 2Student, M. Tech., Department of Civil Engineering, College of Technology, G.B.P.U.A. & T., Pantnagar, Uttarakhand, India
  3. Pankaj Prasad 3Professor, Department of Civil Engineering, ABSS Institute of Technology, Meerut, Uttar Pradesh, India

Abstract

The assessment of in-situ concrete strength using non-destructive testing (NDT) techniques has become increasingly important for quality assurance, structural evaluation, and condition assessment of concrete infrastructure. Among the available NDT methods, the digital rebound hammer offers a rapid, economical, and non-destructive means of estimating concrete compressive strength. This study experimentally investigates the correlation between rebound numbers obtained from a digital rebound hammer and the compressive strength of M30 grade concrete determined using a Compression Testing Machine (CTM). A total of 48 concrete mix combinations were designed in accordance with IS:10262 and cast as 150 mm × 150 mm × 150 mm cube specimens. After 28 days of water curing, each specimen was tested using a LANGRY RH225-B digital rebound hammer, with six rebound readings recorded on each cube to obtain an average rebound number. Subsequently, the specimens were subjected to destructive compressive strength testing using a calibrated CTM. The experimental results demonstrated a strong positive correlation between the average rebound number and the measured compressive strength. The proposed correlation indicates that the digital rebound hammer can reliably estimate the compressive strength and quality of M30 concrete with satisfactory accuracy. The developed relationship provides a practical framework for rapid on-site evaluation of concrete where destructive testing is impractical or undesirable. The findings confirm the applicability of digital rebound hammer testing as an effective quality assessment tool for cement concrete pavements and other reinforced concrete structures, facilitating efficient structural inspection and maintenance. Keywords: Non-destructive testing (NDT), digital rebound hammer, compressive strength, M30 concrete, correlation analysis, cement concrete pavement

References (19)

  1. [1] Abazarsa, M., T. Yu, Multiphysical characterization for predicting compressive strength of Portland cement concrete using synthetic aperture radar, ultrasonic testing, and rebound hammer, Scientific Reports 15 (2025) Article 6058. https://doi.org/10.1038/s41598-024-83829-y. [2] Alwash, M., D. Breysse, Z.M. Sbartaï, K. Szilágyi, A. Borosnyói, Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores, Construction and Building Materials 140 (2017) 354–363. https://doi.org/10.1016/j.conbuildmat.2017.02.129. [3] Brencich, A., R. Bovolenta, V. Ghiggi, D. Pera, P. Redaelli, Rebound Hammer Test: An Investigation into Its Reliability in Applications on Concrete Structures, Advances in Materials Science and Engineering 2020 (2020) Article ID 6450183. https://doi.org/10.1155/2020/6450183. [4] Bungey, J.H., S.G. Millard, M.G. Grantham, Testing of Concrete in Structures, 4th ed., Taylor & Francis/CRC Press, London, UK, 2006. [5] Chen, J., Q. Jin, B. Dong, C. Dong, Research on the Rebound Hammer Testing of High- Strength Concrete's Compressive Strength in the Xinjiang Region, Buildings 13 (12) (2023) 2905. https://doi.org/10.3390/buildings13122905. [6] Diaferio, M., F.B. Varona, The Performance of Empirical Laws for Rebound Hammer Tests on Concrete Structures, Applied Sciences 12 (11) (2022) 5631. https://doi.org/10.3390/app12115631.
  2. [7] Kocáb, D., P. Misák, P. Cikrle, Characteristic curve and its use in determining the compressive strength of concrete by the rebound hammer test, Materials 12 (17) (2019) 2705. https://doi.org/10.3390/ma12172705. [8] Kumavat, H.R., N.R. Chandak, I.T. Patil, Factors influencing the performance of rebound hammer used for non-destructive testing of concrete members: A review, Case Studies in Construction Materials 14 (2021) e00491. https://doi.org/10.1016/j.cscm.2021.e00491. [9] Malhotra, V.M., N.J. Carino (Eds.), Handbook on Nondestructive Testing of Concrete, 2nd ed., CRC Press, Boca Raton, FL, USA, 2004. [10] Mehta, P.K., P.J.M. Monteiro, Concrete: Microstructure, Properties, and Materials, 4th ed., McGraw-Hill Education, New York, 2014. [11] Mengistu, G.M., R. Nemes, Evaluating the performance of recycled aggregate concrete incorporating 3D-Printed concrete waste as aggregate using the rebound hammer test, Heliyon 11 (4) (2025) e42745. https://doi.org/10.1016/j.heliyon.2025.e42745. [12] Neville, A.M., Properties of Concrete, 5th ed., Pearson Education Limited, Harlow, 2011. [13] Nikoo, M., F. Torabian Moghadam, Ł. Sadowski, Prediction of Concrete Compressive Strength by Evolutionary Artificial Neural Networks, Advances in Materials Science and Engineering 2015 (2015) Article ID 849126. https://doi.org/10.1155/2015/849126. [14] Ohta, T., Y. Kimura, Strength-Estimating Equation of High-Strength Concrete Using Rebound Hammers, AIJ Journal of Technology and Design 31 (78) (2025) 619–624. https://doi.org/10.3130/aijt.31.619. [15] Pang, Z., Q. Wang, Y. Wang, Z. Gong, A Novel Intelligent Rebound Hammer System Based on Internet of Things, Micromachines 14 (1) (2023) 148. https://doi.org/10.3390/mi14010148. [16] Revilla-Cuesta, V., V. Ortega-López, F. Faleschini, A.B. Espinosa, R. Serrano-López, Hammer rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate, Construction and Building Materials 347 (2022) 128549. https://doi.org/10.1016/j.conbuildmat.2022.128549. [17] Szilágyi, K., A. Borosnyói, I. Zsigovics, Understanding the rebound surface hardness of concrete, Journal of Civil Engineering and Management 21 (2) (2015) 185–192. https://doi.org/10.3846/13923730.2013.802722.
  3. Abazarsa M, Yu T. Multiphysical characterization for predicting compressive strength of Portland cement concrete using synthetic aperture radar, ultrasonic testing, and rebound hammer. Sci Rep. 2025;15:6058. doi:10.1038/s41598-024-83829-y.
  4. Nikoo M, Torabian Moghadam F, Sadowski Ł. Prediction of concrete compressive strength by evolutionary artificial neural networks. Adv Mater Sci Eng. 2015;2015:849126. doi:10.1155/2015/849126.
  5. Alwash M, Breysse D, Sbartaï ZM, Szilágyi K, Borosnyói A. Factors affecting the reliability of assessing the concrete strength by rebound hammer and cores. Constr Build Mater. 2017;140:354–63. doi:10.1016/j.conbuildmat.2017.02.129.
  6. Brencich A, Bovolenta R, Ghiggi V, Pera D, Redaelli P. Rebound hammer test: An investigation into its reliability in applications on concrete structures. Adv Mater Sci Eng. 2020;2020:6450183. doi:10.1155/2020/6450183.
  7. Chen J, Jin Q, Dong B, Dong C. Research on the rebound hammer testing of high-strength concrete’s compressive strength in the Xinjiang region. Buildings. 2023;13(12):2905. doi:10.3390/buildings13122905.
  8. Diaferio M, Varona FB. The performance of empirical laws for rebound hammer tests on concrete structures. Appl Sci. 2022;12(11):5631. doi:10.3390/app12115631.
  9. Kocáb D, Misák P, Cikrle P. Characteristic curve and its use in determining the compressive strength of concrete by the rebound hammer test. Materials. 2019;12(17):2705. doi:10.3390/ma12172705.
  10. Kumavat HR, Chandak NR, Patil IT. Factors influencing the performance of rebound hammer used for non-destructive testing of concrete members: A review. Case Stud Constr Mater. 2021;14:e00491. doi:10.1016/j.cscm.2021.e00491.
  11. Szilágyi K, Borosnyói A, Zsigovics I. Understanding the rebound surface hardness of concrete. J Civ Eng Manag. 2015;21(2):185–92. doi:10.3846/13923730.2013.802722.
  12. Bungey JH, Millard SG, Grantham MG. Testing of concrete in structures. 4th ed. London: Taylor & Francis/CRC Press; 2006.
  13. Malhotra VM, Carino NJ, editors. Handbook on nondestructive testing of concrete. 2nd ed. Boca Raton (FL): CRC Press; 2004.
  14. Mehta PK, Monteiro PJM. Concrete: Microstructure, properties, and materials. 4th ed. New York: McGraw-Hill Education; 2014.
  15. Neville AM. Properties of concrete. 5th ed. Harlow: Pearson Education Limited; 2011.
  16. Mengistu GM, Nemes R. Evaluating the performance of recycled aggregate concrete incorporating 3D-printed concrete waste as aggregate using the rebound hammer test. Heliyon. 2025;11(4):e42745. doi:10.1016/j.heliyon.2025.e42745.
  17. Ohta T, Kimura Y. Strength-estimating equation of high-strength concrete using rebound hammers. AIJ J Technol Des. 2025;31(78):619–24. doi:10.3130/aijt.31.619.
  18. Pang Z, Wang Q, Wang Y, Gong Z. A novel intelligent rebound hammer system based on Internet of Things. Micromachines (Basel). 2023;14(1):148. doi:10.3390/mi14010148.
  19. Revilla-Cuesta V, Ortega-López V, Faleschini F, Espinosa AB, Serrano-López R. Hammer rebound index as an overall-mechanical-quality indicator of self-compacting concrete containing recycled concrete aggregate. Constr Build Mater. 2022;347:128549. doi:10.1016/j.conbuildmat.2022.128549.

Read more of it

Subscribe to one journal or build your own list of several. One invoice, one payment, access for a full year.

Subscribe to journals →

Publish your article

Peer-reviewed journals across every subject, with open access options. Send your manuscript to the right editor today.

Publish with us → Calculate your APC
Support