Electronic Waste: A Critical Non-Renewable Pollutant

R Ganesh

Electronic Waste: A Critical Non-Renewable Pollutant

R Ganesh | International Journal of Environmental Chemistry | Vol 10, Issue 01 | pp. 29-42 | ISSN: 2456-5245

Abstract

E-waste is an indirect and unexpected waste that affects people, animals and the environment through contamination of air, soil and water. The distribution and long-term storage of electronic waste can have serious impacts on environmental resources. India is the largest energy consumers and are also responsible for the increase in energy and energy waste. Therefore, this article focuses on a detailed description of e-waste management in India, including the recycling process and its consequences. What makes this review article unique is the discussion of legal documents and information from various periods of India. It also provides readers with adequate information about various aspects of the increase in e-waste and methods to manage it. Therefore, it provides sufficient information to reduce consumers' energy consumption and manage factories. In addition, it will also help policymakers involved in shaping India's future e-waste policy. Electronic products/devices that have reached the end of their useful life are considered electronic waste (e-waste). Electronic products can be dangerous or toxic that many people are unaware of; therefore, it should be disposed of carefully when not needed. All of the products are harmful to the environment. E-waste contains rich materials that can be used and recycled, such as copper, gold, silver and platinum. However, the loss of these resources results from improper disposal and accelerates the decline of natural resources. Burial and incineration of e-waste causes many types of pollution and has a significant impact on human health. New technologies are used to manage these wastes efficiently and effectively. However, the management of various types of waste still faces many problems and challenges. The purpose of this section is to describe different types of waste and their impact on the environment. It also explores new technologies for waste management and the challenges faced during waste management.

Keywords

E-waste, Environmental impacts, Health impacts, Legal instruments, Policy, Pollution

🔒 This is a subscription article

Full text is available to subscribers and institutional members. Please choose an option below to access it.

Subscribe Purchase this article Institutional / Login access

References

Forti, V., et al.: The Global E‐waste monitor 2020: quantities, flows and the circular economy potential (2020) [Google Scholar]
Cucchiella, F., et al.: Recycling of WEEEs: an economic assessment of present and future e‐waste streams. Renew. Sustain. Energy Rev. 51, 263–272 (2015) [Google Scholar]
Kaza, S., et al.: What a waste 2.0: a global snapshot of solid waste management to 2050. World Bank Publications; (2018) [Google Scholar]
Kaya, M.: Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. Waste Manag. 57, 64–90 (2016) [PubMed] [Google Scholar]
Singh, N., Duan, H., Tang, Y.: Toxicity evaluation of E‐waste plastics and potential repercussions for human health. Environ. Int. 137, 105559 (2020) [PubMed] [Google Scholar]
Tsydenova, O., Bengtsson, M.: Chemical hazards associated with treatment of waste electrical and electronic equipment. Waste Manag. 31(1), 45–58 (2011) [PubMed] [Google Scholar]
Cesaro, A., et al.: A relative risk assessment of the open burning of WEEE. Environ. Sci. Pollut. Control Ser. 26(11), 11042–11052 (2019) [PMC free article] [PubMed] [Google Scholar]
Rautela, R., et al.: E‐waste management and its effects on the environment and human health. Sci. Total Environ. 773, 145623 (2021) [PubMed] [Google Scholar]
Baldé, C.P.: The global e‐waste monitor 2017: quantities, flows and resources. United Nations University, International Telecommunication Union, and (2017) [Google Scholar]
Zeng, X., Mathews, J.A., Li, J.: Urban mining of E‐waste is becoming more cost‐effective than virgin mining. Environ. Sci. Technol. 52(8), 4835–4841 (2018) [PubMed] [Google Scholar]
Kaya, M.: 3 ‐ current WEEE recycling solutions. In: Vegliò, F., Birloaga, I. (eds.) Waste electrical and electronic equipment recycling, pp. 33–93. Woodhead Publishing; (2018) [Google Scholar]
Rawat, S., Verma, L., Singh, J.: Environmental hazards and management of E‐waste. Environmental concerns and sustainable development, pp. 381–398. Springer; (2020) [Google Scholar]
Sahajwalla, V., Gaikwad, V.: The present and future of e‐waste plastics recycling. Current Opinion in Green and Sustainable Chemistry. 13, 102–107 (2018) [Google Scholar]
Ahirwar, R., Tripathi, A.K.: E‐waste management: a review of recycling process, environmental and occupational health hazards, and potential solutions. Environmental Nanotechnology, Monitoring & Management. 15, 100409 (2021) [Google Scholar]
Zhang, L., Xu, Z.: A review of current progress of recycling technologies for metals from waste electrical and electronic equipment. J. Clean. Prod. 127, 19–36 (2016) [Google Scholar]
Gadd, G.M.: Metals, minerals and microbes: geomicrobiology and bioremediation. Microbiology. 156(3), 609–643 (2010) [PubMed] [Google Scholar]
Mishra, D., et al.: Bioleaching: a microbial process of metal recovery; a review. Met. Mater. Int. 11(3), 249–256 (2005) [Google Scholar]
Cui, J., Zhang, L.: Metallurgical recovery of metals from electronic waste: a review. J. Hazard Mater. 158(2‐3), 228–56 (2008) [PubMed] [Google Scholar]
Srichandan, H., et al.: Bioleaching approach for extraction of metal values from secondary solid wastes: a critical review. Hydrometallurgy. 189, 105122 (2019) [Google Scholar]
Valix, M.: Bioleaching of electronic waste: milestones and challenges. Current developments in biotechnology and bioengineering, pp. 407–442. Elsevier; (2017) [Google Scholar]
Islam, A., et al.: Advances in sustainable approaches to recover metals from e‐waste‐A review. J. Clean. Prod. 244, 118815 (2020) [Google Scholar]
Mudila, H., et al.: E‐waste and its hazard management by specific microbial bioremediation processes. In: Microbial rejuvenation of polluted environment, pp. 139–166. Springer; (2021) [Google Scholar]
Zhao, F., Wang, S.: Bioleaching of electronic waste using extreme acidophiles. Electronic Waste Management and Treatment Technology, pp. 153–174. Elsevier; (2019) [Google Scholar]
Wang, X., Gaustad, G.: Prioritizing material recovery for end‐of‐life printed circuit boards. Waste Manag. 32(10), 1903–1913 (2012) [PubMed] [Google Scholar]
Arshadi, M., Mousavi, S.: Simultaneous recovery of Ni and Cu from computer‐printed circuit boards using bioleaching: statistical evaluation and optimization. Bioresour. Technol. 174, 233–242 (2014) [PubMed] [Google Scholar]
Ilyas, S., Lee, J.‐c.: Bioleaching of metals from electronic scrap in a stirred tank reactor. Hydrometallurgy. 149, 50–62 (2014) [Google Scholar]
Wang, J., et al.: Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J. Hazard Mater. 172(2‐3), 1100–5 (2009) [PubMed] [Google Scholar]
Liang, G., Mo, Y., Zhou, Q.: Novel strategies of bioleaching metals from printed circuit boards (PCBs) in mixed cultivation of two acidophiles. Enzym. Microb. Technol. 47(7), 322–326 (2010) [Google Scholar]
Brierley, J., Brierley, C.: Present and future commercial applications of biohydrometallurgy. Hydrometallurgy. 59(2‐3), 233–9 (2001) [Google Scholar]
Xiang, Y., et al.: Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage. J. Hazard Mater. 184(1–3), 812–8 (2010) [PubMed] [Google Scholar]
Wu, W., et al.: Bioleaching of copper from waste printed circuit boards by bacteria‐free cultural supernatant of iron–sulfur‐oxidizing bacteria. Bioresources and Bioprocessing. 5(1), 1–13 (2018) [Google Scholar]
Sadeghabad, M.S., Bahaloo‐Horeh, N., Mousavi, S.M.: Using bacterial culture supernatant for extraction of manganese and zinc from waste alkaline button‐cell batteries. Hydrometallurgy. 188, 81–91 (2019) [Google Scholar]
Jiang, L.‐L., et al.: Advances in industrial microbiome based on microbial consortium for biorefinery. Bioresources and bioprocessing. 4(1), 1–10 (2017) [PMC free article] [PubMed] [Google Scholar]
Işıldar, A., et al.: Two‐step bioleaching of copper and gold from discarded printed circuit boards (PCB). Waste Manag. 57, 149–57 (2016) [PubMed] [Google Scholar]
Kaksonen, A.H., et al.: Recent progress in biohydrometallurgy and microbial characterisation. Hydrometallurgy. 180, 7–25 (2018) [Google Scholar]
Arshadi, M., Mousavi, S.: Multi‐objective optimization of heavy metals bioleaching from discarded mobile phone PCBs: simultaneous Cu and Ni recovery using Acidithiobacillus ferrooxidans. Separ. Purif. Technol. 147, 210–219 (2015) [Google Scholar]
Arshadi, M., Mousavi, S., Rasoulnia, P.: Enhancement of simultaneous gold and copper recovery from discarded mobile phone PCBs using Bacillus megaterium: RSM based optimization of effective factors and evaluation of their interactions. Waste Manag. 57, 158–167 (2016) [PubMed] [Google Scholar]
Olson, G., Brierley, J., Brierley, C.: Bioleaching review part B. Appl. Microbiol. Biotechnol. 63(3), 249–257 (2003) [PubMed] [Google Scholar]
Brierley, C.L., Brierley, J.A.: Progress in bioleaching: part B: applications of microbial processes by the minerals industries. Appl. Microbiol. Biotechnol. 97(17), 7543–7552 (2013) [PubMed] [Google Scholar]
Johnson, D.B.: Biomining—biotechnologies for extracting and recovering metals from ores and waste materials. Curr. Opin. Biotechnol. 30, 24–31 (2014) [PubMed] [Google Scholar]
Schippers, A., et al.: Biomining: metal recovery from ores with microorganisms. Geobiotechnology I, 141, 1–47 (2013) [PubMed] [Google Scholar]
Gericke, M., Neale, J.W., van Staden, P.J.: A Mintek perspective of the past 25 years in minerals bioleaching. Journal of the Southern African Institute of Mining and Metallurgy. 109, 567–85 (2009) [Google Scholar]
Miller, P.C.: The design and operating practice of bacterial oxidation plant using moderate thermophiles(the BacTech process). In: Rawlings, D.E. (ed.) Biomining: theory, microbes and industrial processes, pp. 81–102. Springer Berlin Heidelberg, Berlin: (1997) [Google Scholar]
Kwok, R.: Inner Workings: how bacteria could help recycle electronic waste. Proc. Natl. Acad. Sci. Unit. States Am. 116(3), 711–713 (2019) [PMC free article] [PubMed] [Google Scholar]
Baniasadi, M., et al.: Closed‐loop recycling of copper from waste printed circuit boards using bioleaching and electrowinning processes. Waste and Biomass Valorization. 12(6), 3125–3136 (2021) [Google Scholar]
De Lorenzo, V., et al.: The power of synthetic biology for bioproduction, remediation and pollution control: the UN's Sustainable Development Goals will inevitably require the application of molecular biology and biotechnology on a global scale. EMBO Rep. 19(4), e45658 (2018) [PMC free article] [PubMed] [Google Scholar]
Capeness, M.J., Horsfall, L.E.: Synthetic biology approaches towards the recycling of metals from the environment. Biochem. Soc. Trans. 48(4), 1367–1378 (2020) [PMC free article] [PubMed] [Google Scholar]
Diep, P., Mahadevan, R., Yakunin, A.F.: Heavy metal removal by bioaccumulation using genetically engineered microorganisms. Front. Bioeng. Biotechnol. 6, 157 (2018) [PMC free article] [PubMed] [Google Scholar]
Sharma, P., et al.: Metal and metal (loids) removal efficiency using genetically engineered microbes: applications and challenges. J. Hazard Mater. 416, 125855 (2021) [PubMed] [Google Scholar]
Johnston, C.W., et al.: Gold biomineralization by a metallophore from a gold‐associated microbe. Nat. Chem. Biol. 9(4), 241–243 (2013) [PubMed] [Google Scholar]
Wu, C.H., et al.: Engineering plant‐microbe symbiosis for rhizoremediation of heavy metals. Appl. Environ. Microbiol. 72(2), 1129–1134 (2006) [PMC free article] [PubMed] [Google Scholar]
Aminian‐Dehkordi, J., et al.: A systems‐based approach for cyanide overproduction by Bacillus megaterium for gold bioleaching enhancement. Front. Bioeng. Biotechnol. 8, 528 (2020) [PMC free article] [PubMed] [Google Scholar]
Zhu, N., Zhang, B., Yu, Q.: Genetic engineering‐facilitated coassembly of synthetic bacterial cells and magnetic nanoparticles for efficient heavy metal removal. ACS Appl. Mater. Interfaces. 12(20), 22948–22957 (2020) [PubMed] [Google Scholar]
Kusano, T., et al.: Electrotransformation of Thiobacillus ferrooxidans with plasmids containing a mer determinant. J. Bacteriol. 174(20), 6617–6623 (1992) [PMC free article] [PubMed] [Google Scholar]
Peng, J.‐B., Yan, W.‐M., Bao, X.‐Z.: Expression of heterogenous arsenic resistance genes in the obligately autotrophic biomining bacterium Thiobacillus ferrooxidans. Appl. Environ. Microbiol. 60(7), 2653–2656 (1994) [PMC free article] [PubMed] [Google Scholar]
Gumulya, Y., et al.: In a quest for engineering acidophiles for biomining applications: challenges and opportunities. Genes. 9(2), 116 (2018) [PMC free article] [PubMed] [Google Scholar]
Liu, R., Li, J., Ge, Z.: Review on Chromobacterium violaceum for gold bioleaching from E‐waste. Procedia Environmental Sciences. 31, 947–953 (2016) [Google Scholar]
Natarajan, G., Ting, Y.‐P.: Pretreatment of e‐waste and mutation of alkali‐tolerant cyanogenic bacteria promote gold biorecovery. Bioresour. Technol. 152, 80–85 (2014) [PubMed] [Google Scholar]
Tay, S.B., et al.: Enhancing gold recovery from electronic waste via lixiviant metabolic engineering in Chromobacterium violaceum. Sci. Rep. 3(1), 1–7 (2013) [PMC free article] [PubMed] [Google Scholar]
Natarajan, G., et al.: Engineered strains enhance gold biorecovery from electronic scrap. Miner. Eng. 75, 32–37 (2015) [Google Scholar]
Liow, L.T., et al.: Toolkit development for cyanogenic and gold biorecovery chassis Chromobacterium violaceum. ACS Synth. Biol. 9(4), 953–961 (2020) [PubMed] [Google Scholar]
Buekens, A., Yang, J.: Recycling of WEEE plastics: a review. J. Mater. Cycles Waste Manag. 16(3), 415–434 (2014) [Google Scholar]
Slijkhuis, C.: Recycling plastics from WEEE requiring a sensible and practical approach on POPs. Going Green Care Innovation, Vienna. Austria2018. (2018) [Google Scholar]
Hahladakis, J.N., et al.: An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. J. Hazard Mater. 344, 179–199 (2018) [PubMed] [Google Scholar]
Ru, J., Huo, Y., Yang, Y.: Microbial degradation and valorization of plastic wastes. Front. Microbiol. 11, 442 (2020) [PMC free article] [PubMed] [Google Scholar]
Ali, S.S., et al.: Plastic wastes biodegradation: mechanisms, challenges and future prospects. Sci. Total Environ. 780, pp. 146590. (2021) [PubMed] [Google Scholar]
Raddadi, N., Fava, F.: Biodegradation of oil‐based plastics in the environment: existing knowledge and needs of research and innovation. Sci. Total Environ. 679, 148–158 (2019) [PubMed] [Google Scholar]
Amobonye, A., et al.: Plastic biodegradation: frontline microbes and their enzymes, pp. 143536. Science of The Total Environment; (2020) [PubMed] [Google Scholar]
Othman, A.R., et al.: Microbial degradation of microplastics by enzymatic processes: a review. Environ. Chem. Lett. 19, 1–17 (2021) [Google Scholar]
Yoshida, S., et al.: A bacterium that degrades and assimilates poly (ethylene terephthalate). Science. 351(6278), 1196–1199 (2016) [PubMed] [Google Scholar]
Purohit, J., Chattopadhyay, A., Teli, B.: Metagenomic exploration of plastic degrading microbes for biotechnological application. Curr. Genom. 21(4), 253–270 (2020) [PMC free article] [PubMed] [Google Scholar]
Sekhar, V.C., et al.: Microbial degradation of high impact polystyrene (HIPS), an e‐plastic with decabromodiphenyl oxide and antimony trioxide. J. Hazard Mater. 318, 347–354 (2016) [PubMed] [Google Scholar]
Mohan, A.J., et al.: Microbial assisted high impact polystyrene (HIPS) degradation. Bioresour. Technol. 213, 204–207 (2016) [PubMed] [Google Scholar]
Austin, H.P., et al.: Characterization and engineering of a plastic‐degrading aromatic polyesterase. Proc. Natl. Acad. Sci. Unit. States Am. 115(19), E4350–E4357 (2018) [PMC free article] [PubMed] [Google Scholar]
Ma, Y., et al.: Enhanced poly(ethylene terephthalate) hydrolase activity by protein engineering. Engineering. 4(6), 888–893 (2018) [Google Scholar]
Tournier, V., et al.: An engineered PET depolymerase to break down and recycle plastic bottles. Nature. 580(7802), 216–219 (2020) [PubMed] [Google Scholar]
Jaiswal, S., Sharma, B., Shukla, P.: Integrated approaches in microbial degradation of plastics. Environ. Technol. Innovat. 17, 100567 (2020) [Google Scholar]
Skariyachan, S., et al.: Recent advances in plastic degradation‐From microbial consortia‐based methods to data sciences and computational biology driven approaches. J. Hazard Mater. 426, 128086 (2021) [PubMed] [Google Scholar]
Olson, D.G., et al.: Recent progress in consolidated bioprocessing. Curr. Opin. Biotechnol. 23(3), 396–405 (2012) [PubMed] [Google Scholar]
McCarty, N.S., Ledesma‐Amaro, R.: Synthetic biology tools to engineer microbial communities for biotechnology. Trends Biotechnol. 37(2), 181–197 (2019) [PMC free article] [PubMed] [Google Scholar]
Salvador, M., et al.: Microbial genes for a circular and sustainable bio‐PET economy. Genes. 10(5), 373 (2019) [PMC free article] [PubMed] [Google Scholar]
Ballerstedt, H., et al.: MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX‐UP started January 2020. Environ. Sci. Eur. 33(1), 1–9 (2021) [PMC free article] [PubMed] [Google Scholar]
Pant, D., Giri, A., Dhiman, V.: Bioremediation techniques for E‐waste management. In: Varjani, S.J., et al. (eds.) Waste bioremediation, pp. 105–125. Springer Singapore, Singapore: (2018) [Google Scholar]
Singh, N., et al.: Toxicity trends in E‐Waste: a comparative analysis of metals in discarded mobile phones. J. Hazard Mater. 380, 120898 (2019) [PubMed] [Google Scholar]
Ma, C., et al.: Chemical recycling of brominated flame retarded plastics from e‐waste for clean fuels production: a review. Renew. Sustain. Energy Rev. 61, 433–450 (2016) [Google Scholar]
Singh, N., et al.: Characterizing the materials composition and recovery potential from waste mobile phones: a comparative evaluation of cellular and smart phones. ACS Sustain. Chem. Eng. 6(10), 13016–13024 (2018) [Google Scholar]
Ahmed, T., et al.: Bioremediation approaches for E‐waste management: a step toward sustainable environment. In: Hashmi, M.Z., Varma, A. (eds.) Electronic waste pollution: environmental occurrence and treatment technologies, pp. 267–290. Springer International Publishing, Cham: (2019) [Google Scholar]
Heylen, K., et al.: Safeguarding bacterial resources promotes biotechnological innovation. Appl. Microbiol. Biotechnol. 94(3), 565–574 (2012) [PubMed] [Google Scholar]
Balfour‐Cunningham, A., et al.: Preservation of salt‐tolerant acidophiles used for chalcopyrite bioleaching: assessment of cryopreservation, liquid‐drying and cold storage. Miner. Eng. 106, 91–96 (2017) [Google Scholar]
Spring, S.: 15 preservation of thermophilic microorganisms. Methods Microbiol. 35, 349–368. Academic Press; (2006) [Google Scholar]
Johnson, D.B.: Selective solid media for isolating and enumerating acidophilic bacteria. J. Microbiol. Methods. 23(2), 205–218 (1995) [Google Scholar]
Blackburn, J.W.: Bioremediation scaleup effectiveness: a review. Ann. Finance. 1(4), 265–282 (1998) [Google Scholar]
Sturman, P.J., et al.: Engineering scale‐up of in situ bioremediation processes: a review. J. Contam. Hydrol. 19(3), 171–203 (1995) [Google Scholar]
Danso, D., et al.: New insights into the function and global distribution of polyethylene terephthalate (PET)‐degrading bacteria and enzymes in marine and terrestrial metagenomes. Appl. Environ. Microbiol. 84(8), e02773–17 (2018) [PMC free article] [PubMed] [Google Scholar]
Hillson, N., et al.: Building a global alliance of biofoundries. Nat. Commun. 10(1), 1–4 (2019) [PMC free article] [PubMed] [Google Scholar]
Knight, T.: Idempotent vector design for standard assembly of biobricks (2003) [Google Scholar]
Silva‐Rocha, R., et al.: The Standard European Vector Architecture (SEVA): a coherent platform for the analysis and deployment of complex prokaryotic phenotypes. Nucleic Acids Res. 41(D1), D666–D675 (2012) [PMC free article] [PubMed] [Google Scholar]
Heap, J.T., et al.: A modular system for Clostridium shuttle plasmids. J. Microbiol. Methods. 78(1), 79–85 (2009) [PubMed] [Google Scholar]
Vasudevan, R., et al.: CyanoGate: a modular cloning suite for engineering cyanobacteria based on the plant MoClo syntax. Plant Physiol. 180(1), 39–55 (2019) [PMC free article] [PubMed] [Google Scholar]
Kane, A.L., et al.: Toward bioremediation of methylmercury using silica encapsulated Escherichia coli harboring the mer operon. PLoS One. 11(1), e0147036 (2016) [PMC free article] [PubMed] [Google Scholar]
Duprey, A., et al.: “NiCo Buster”: engineering E. coli for fast and efficient capture of cobalt and nickel. J. Biol. Eng. 8(1), 1–11 (2014) [PMC free article] [PubMed] [Google Scholar]
Yan, L., et al.: Integration of a gold‐Specific whole E. coli cell sensing and adsorption based on bioBrick. Int. J. Mol. Sci. 19(12), 3741 (2018) [PMC free article] [PubMed] [Google Scholar]
Chiu, F.W.Y., Stavrakis, S.: High‐throughput droplet‐based microfluidics for directed evolution of enzymes. Electrophoresis. 40(21), 2860–2872 (2019) [PMC free article] [PubMed] [Google Scholar]
Ilyas, S., et al.: Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy. 88(1‐4), 180–8 (2007) [Google Scholar]
Shah, M.B., et al.: Development of two‐step process for enhanced biorecovery of Cu–Zn–Ni from computer printed circuit boards. J. Biosci. Bioeng. 120(2), 167–173 (2015) [PubMed] [Google Scholar]
Published on 15.7.2020 in Vol 22, No 7 (2020): July Preprints (earlier versions) of this paper are available at https://preprints.jmir.org/preprint/19274, first published April 14, 2020.
E-Waste: A Global Hazard Author links open overlay panelDevin N. Perkins BS 1, Marie-Noel Brune Drisse MS 1, Tapiwa Nxele MS 1, Peter D. Sly MD 2
A simplified method to evaluate the recycling potential of e-waste Author links open overlay panelXianlai Zeng a, Fang Wang a, Jinhui Li a, Ruying Gong b
https://www.greene.gov.in/wp-content/uploads/2020/12/2020120929.pdf
E-waste in the international context – A review of trade flows, regulations, hazards, waste management strategies and technologies for value recoveryAuthor links open overlay panelI.M.S.K. Ilankoon a b, Yousef Ghorbani c, Meng Nan Chong a b d, Gamini Herath b e, Thandazile Moyo f, Jochen Petersen f
Parajuly, K., Kuehr, R., Awasthi, A. K., Fitzpatrick, C., Lepawsky, J., Smith, E., ... & Zeng, X. (2019). Future e-waste scenarios.112. … There is e-waste produced in the manufacturing process as well as … electronics, it isincreasingly common for countries that are still developing to possess electronic goods (Larrdis, 2011…
Global corporate social responsibility initiatives for reluctant businesses AR Khan, Z Yu, M Panait, LR Janjua, A Shah – 2021
Evaluation of e-waste management systems in Malaysia using life cycle assessment and material flow analysisAuthor links open overlay panelHaikal Ismail a b, Marlia M. Hanafiah a
Nita, A. Empowering Impact Assessments Knowledge and International Research Collaboration—A Bibliometric Analysis of Environmental Impact Assessment Review Journal. Environ. Impact Assess. Rev. 2019, 78, 106283. [Google Scholar] [CrossRef]
The Economic Times Tech, 2020. Mobiles part of ‘most dangerous’ e-waste as India turns litterbug Google Scholar
Balde, C., Forti, V., Gray, V., Kuehr, R., Stegmann, P., 2017. The global e-waste monitor 2017. http://collections.unu.edu/eserv/UNU:6341/Global-E-waste$_Monitore$_2017__$electronic$_$single$_$pages$_$.pdf. 10.1016/j.proci.2014.05.148 Google Scholar
Rautela, S. Arya, S. Vishwakarma, J. Lee, K.-H. Kim, S. Kumar E-waste management and its effects on the environment and human health Sci. Total Environ. (2021), p. 145623
N. Soetrisno, J.M. Delgado-Saborit Chronic exposure to heavy metals from informal e-waste recycling plants and children’s attention, executive function and academic performance Sci. Total Environ., 717 (2020), p. 137099
Needhidasan, M. Samuel, R. Chidambaram Electronic waste - an emerging threat to the environment of urban India J. Environ. Heal. Sci. Eng., 12 (2014), pp. 1-9
Dupont, S. Arnout, P.T. Jones, K. Binnemans Antimony recovery from end-of-life products and industrial process residues: a critical review J. Sustain. Metall., 2 (2016), pp. 79-103.

How to cite this article

APA

Ganesh, R. (2024). Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry, 10(01), 29-42.

MLA

Ganesh, R. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry, vol. 10, no. 01, 2024, pp. 29-42.

Chicago

R Ganesh. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry 10, no. 01 (2024): 29-42.

Vancouver

Ganesh R. Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry. 2024;10(01):29-42.

BibTeX

@article{GaneshR2024,
author = {R Ganesh},
title = {Electronic Waste: A Critical Non-Renewable Pollutant},
journal = {International Journal of Environmental Chemistry},
year = {2024},
volume = {10},
number = {01},
pages = {29--42},
issn = {2456-5245},
url = {https://journalspub.com/publication/uncategorized/article=6629}
}

Necessary Cookies Always Active

Necessary cookies enable essential site features like secure log-ins and consent preference adjustments. They do not store personal data.

Functional Cookies Remark

Functional cookies support features like content sharing on social media, collecting feedback, and enabling third-party tools.

Analytical Cookies Remark

Analytical cookies track visitor interactions, providing insights on metrics like visitor count, bounce rate, and traffic sources.

Advertisement Cookies Remark

Advertisement cookies deliver personalized ads based on your previous visits and analyze the effectiveness of ad campaigns.

R Ganesh | International Journal of Environmental Chemistry | Vol 10, Issue 01 | pp. 29-42 | ISSN: 2456-5245

Abstract

Keywords

E-waste, Environmental impacts, Health impacts, Legal instruments, Policy, Pollution

🔒 This is a subscription article

Full text is available to subscribers and institutional members. Please choose an option below to access it.

Subscribe Purchase this article Institutional / Login access

References

Forti, V., et al.: The Global E‐waste monitor 2020: quantities, flows and the circular economy potential (2020) [Google Scholar]
Cucchiella, F., et al.: Recycling of WEEEs: an economic assessment of present and future e‐waste streams. Renew. Sustain. Energy Rev. 51, 263–272 (2015) [Google Scholar]
Kaza, S., et al.: What a waste 2.0: a global snapshot of solid waste management to 2050. World Bank Publications; (2018) [Google Scholar]
Kaya, M.: Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. Waste Manag. 57, 64–90 (2016) [PubMed] [Google Scholar]
Singh, N., Duan, H., Tang, Y.: Toxicity evaluation of E‐waste plastics and potential repercussions for human health. Environ. Int. 137, 105559 (2020) [PubMed] [Google Scholar]
Tsydenova, O., Bengtsson, M.: Chemical hazards associated with treatment of waste electrical and electronic equipment. Waste Manag. 31(1), 45–58 (2011) [PubMed] [Google Scholar]
Cesaro, A., et al.: A relative risk assessment of the open burning of WEEE. Environ. Sci. Pollut. Control Ser. 26(11), 11042–11052 (2019) [PMC free article] [PubMed] [Google Scholar]
Rautela, R., et al.: E‐waste management and its effects on the environment and human health. Sci. Total Environ. 773, 145623 (2021) [PubMed] [Google Scholar]
Baldé, C.P.: The global e‐waste monitor 2017: quantities, flows and resources. United Nations University, International Telecommunication Union, and (2017) [Google Scholar]
Zeng, X., Mathews, J.A., Li, J.: Urban mining of E‐waste is becoming more cost‐effective than virgin mining. Environ. Sci. Technol. 52(8), 4835–4841 (2018) [PubMed] [Google Scholar]
Kaya, M.: 3 ‐ current WEEE recycling solutions. In: Vegliò, F., Birloaga, I. (eds.) Waste electrical and electronic equipment recycling, pp. 33–93. Woodhead Publishing; (2018) [Google Scholar]
Rawat, S., Verma, L., Singh, J.: Environmental hazards and management of E‐waste. Environmental concerns and sustainable development, pp. 381–398. Springer; (2020) [Google Scholar]
Sahajwalla, V., Gaikwad, V.: The present and future of e‐waste plastics recycling. Current Opinion in Green and Sustainable Chemistry. 13, 102–107 (2018) [Google Scholar]
Ahirwar, R., Tripathi, A.K.: E‐waste management: a review of recycling process, environmental and occupational health hazards, and potential solutions. Environmental Nanotechnology, Monitoring & Management. 15, 100409 (2021) [Google Scholar]
Zhang, L., Xu, Z.: A review of current progress of recycling technologies for metals from waste electrical and electronic equipment. J. Clean. Prod. 127, 19–36 (2016) [Google Scholar]
Gadd, G.M.: Metals, minerals and microbes: geomicrobiology and bioremediation. Microbiology. 156(3), 609–643 (2010) [PubMed] [Google Scholar]
Mishra, D., et al.: Bioleaching: a microbial process of metal recovery; a review. Met. Mater. Int. 11(3), 249–256 (2005) [Google Scholar]
Cui, J., Zhang, L.: Metallurgical recovery of metals from electronic waste: a review. J. Hazard Mater. 158(2‐3), 228–56 (2008) [PubMed] [Google Scholar]
Srichandan, H., et al.: Bioleaching approach for extraction of metal values from secondary solid wastes: a critical review. Hydrometallurgy. 189, 105122 (2019) [Google Scholar]
Valix, M.: Bioleaching of electronic waste: milestones and challenges. Current developments in biotechnology and bioengineering, pp. 407–442. Elsevier; (2017) [Google Scholar]
Islam, A., et al.: Advances in sustainable approaches to recover metals from e‐waste‐A review. J. Clean. Prod. 244, 118815 (2020) [Google Scholar]
Mudila, H., et al.: E‐waste and its hazard management by specific microbial bioremediation processes. In: Microbial rejuvenation of polluted environment, pp. 139–166. Springer; (2021) [Google Scholar]
Zhao, F., Wang, S.: Bioleaching of electronic waste using extreme acidophiles. Electronic Waste Management and Treatment Technology, pp. 153–174. Elsevier; (2019) [Google Scholar]
Wang, X., Gaustad, G.: Prioritizing material recovery for end‐of‐life printed circuit boards. Waste Manag. 32(10), 1903–1913 (2012) [PubMed] [Google Scholar]
Arshadi, M., Mousavi, S.: Simultaneous recovery of Ni and Cu from computer‐printed circuit boards using bioleaching: statistical evaluation and optimization. Bioresour. Technol. 174, 233–242 (2014) [PubMed] [Google Scholar]
Ilyas, S., Lee, J.‐c.: Bioleaching of metals from electronic scrap in a stirred tank reactor. Hydrometallurgy. 149, 50–62 (2014) [Google Scholar]
Wang, J., et al.: Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J. Hazard Mater. 172(2‐3), 1100–5 (2009) [PubMed] [Google Scholar]
Liang, G., Mo, Y., Zhou, Q.: Novel strategies of bioleaching metals from printed circuit boards (PCBs) in mixed cultivation of two acidophiles. Enzym. Microb. Technol. 47(7), 322–326 (2010) [Google Scholar]
Brierley, J., Brierley, C.: Present and future commercial applications of biohydrometallurgy. Hydrometallurgy. 59(2‐3), 233–9 (2001) [Google Scholar]
Xiang, Y., et al.: Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage. J. Hazard Mater. 184(1–3), 812–8 (2010) [PubMed] [Google Scholar]
Wu, W., et al.: Bioleaching of copper from waste printed circuit boards by bacteria‐free cultural supernatant of iron–sulfur‐oxidizing bacteria. Bioresources and Bioprocessing. 5(1), 1–13 (2018) [Google Scholar]
Sadeghabad, M.S., Bahaloo‐Horeh, N., Mousavi, S.M.: Using bacterial culture supernatant for extraction of manganese and zinc from waste alkaline button‐cell batteries. Hydrometallurgy. 188, 81–91 (2019) [Google Scholar]
Jiang, L.‐L., et al.: Advances in industrial microbiome based on microbial consortium for biorefinery. Bioresources and bioprocessing. 4(1), 1–10 (2017) [PMC free article] [PubMed] [Google Scholar]
Işıldar, A., et al.: Two‐step bioleaching of copper and gold from discarded printed circuit boards (PCB). Waste Manag. 57, 149–57 (2016) [PubMed] [Google Scholar]
Kaksonen, A.H., et al.: Recent progress in biohydrometallurgy and microbial characterisation. Hydrometallurgy. 180, 7–25 (2018) [Google Scholar]
Arshadi, M., Mousavi, S.: Multi‐objective optimization of heavy metals bioleaching from discarded mobile phone PCBs: simultaneous Cu and Ni recovery using Acidithiobacillus ferrooxidans. Separ. Purif. Technol. 147, 210–219 (2015) [Google Scholar]
Arshadi, M., Mousavi, S., Rasoulnia, P.: Enhancement of simultaneous gold and copper recovery from discarded mobile phone PCBs using Bacillus megaterium: RSM based optimization of effective factors and evaluation of their interactions. Waste Manag. 57, 158–167 (2016) [PubMed] [Google Scholar]
Olson, G., Brierley, J., Brierley, C.: Bioleaching review part B. Appl. Microbiol. Biotechnol. 63(3), 249–257 (2003) [PubMed] [Google Scholar]
Brierley, C.L., Brierley, J.A.: Progress in bioleaching: part B: applications of microbial processes by the minerals industries. Appl. Microbiol. Biotechnol. 97(17), 7543–7552 (2013) [PubMed] [Google Scholar]
Johnson, D.B.: Biomining—biotechnologies for extracting and recovering metals from ores and waste materials. Curr. Opin. Biotechnol. 30, 24–31 (2014) [PubMed] [Google Scholar]
Schippers, A., et al.: Biomining: metal recovery from ores with microorganisms. Geobiotechnology I, 141, 1–47 (2013) [PubMed] [Google Scholar]
Gericke, M., Neale, J.W., van Staden, P.J.: A Mintek perspective of the past 25 years in minerals bioleaching. Journal of the Southern African Institute of Mining and Metallurgy. 109, 567–85 (2009) [Google Scholar]
Miller, P.C.: The design and operating practice of bacterial oxidation plant using moderate thermophiles(the BacTech process). In: Rawlings, D.E. (ed.) Biomining: theory, microbes and industrial processes, pp. 81–102. Springer Berlin Heidelberg, Berlin: (1997) [Google Scholar]
Kwok, R.: Inner Workings: how bacteria could help recycle electronic waste. Proc. Natl. Acad. Sci. Unit. States Am. 116(3), 711–713 (2019) [PMC free article] [PubMed] [Google Scholar]
Baniasadi, M., et al.: Closed‐loop recycling of copper from waste printed circuit boards using bioleaching and electrowinning processes. Waste and Biomass Valorization. 12(6), 3125–3136 (2021) [Google Scholar]
De Lorenzo, V., et al.: The power of synthetic biology for bioproduction, remediation and pollution control: the UN's Sustainable Development Goals will inevitably require the application of molecular biology and biotechnology on a global scale. EMBO Rep. 19(4), e45658 (2018) [PMC free article] [PubMed] [Google Scholar]
Capeness, M.J., Horsfall, L.E.: Synthetic biology approaches towards the recycling of metals from the environment. Biochem. Soc. Trans. 48(4), 1367–1378 (2020) [PMC free article] [PubMed] [Google Scholar]
Diep, P., Mahadevan, R., Yakunin, A.F.: Heavy metal removal by bioaccumulation using genetically engineered microorganisms. Front. Bioeng. Biotechnol. 6, 157 (2018) [PMC free article] [PubMed] [Google Scholar]
Sharma, P., et al.: Metal and metal (loids) removal efficiency using genetically engineered microbes: applications and challenges. J. Hazard Mater. 416, 125855 (2021) [PubMed] [Google Scholar]
Johnston, C.W., et al.: Gold biomineralization by a metallophore from a gold‐associated microbe. Nat. Chem. Biol. 9(4), 241–243 (2013) [PubMed] [Google Scholar]
Wu, C.H., et al.: Engineering plant‐microbe symbiosis for rhizoremediation of heavy metals. Appl. Environ. Microbiol. 72(2), 1129–1134 (2006) [PMC free article] [PubMed] [Google Scholar]
Aminian‐Dehkordi, J., et al.: A systems‐based approach for cyanide overproduction by Bacillus megaterium for gold bioleaching enhancement. Front. Bioeng. Biotechnol. 8, 528 (2020) [PMC free article] [PubMed] [Google Scholar]
Zhu, N., Zhang, B., Yu, Q.: Genetic engineering‐facilitated coassembly of synthetic bacterial cells and magnetic nanoparticles for efficient heavy metal removal. ACS Appl. Mater. Interfaces. 12(20), 22948–22957 (2020) [PubMed] [Google Scholar]
Kusano, T., et al.: Electrotransformation of Thiobacillus ferrooxidans with plasmids containing a mer determinant. J. Bacteriol. 174(20), 6617–6623 (1992) [PMC free article] [PubMed] [Google Scholar]
Peng, J.‐B., Yan, W.‐M., Bao, X.‐Z.: Expression of heterogenous arsenic resistance genes in the obligately autotrophic biomining bacterium Thiobacillus ferrooxidans. Appl. Environ. Microbiol. 60(7), 2653–2656 (1994) [PMC free article] [PubMed] [Google Scholar]
Gumulya, Y., et al.: In a quest for engineering acidophiles for biomining applications: challenges and opportunities. Genes. 9(2), 116 (2018) [PMC free article] [PubMed] [Google Scholar]
Liu, R., Li, J., Ge, Z.: Review on Chromobacterium violaceum for gold bioleaching from E‐waste. Procedia Environmental Sciences. 31, 947–953 (2016) [Google Scholar]
Natarajan, G., Ting, Y.‐P.: Pretreatment of e‐waste and mutation of alkali‐tolerant cyanogenic bacteria promote gold biorecovery. Bioresour. Technol. 152, 80–85 (2014) [PubMed] [Google Scholar]
Tay, S.B., et al.: Enhancing gold recovery from electronic waste via lixiviant metabolic engineering in Chromobacterium violaceum. Sci. Rep. 3(1), 1–7 (2013) [PMC free article] [PubMed] [Google Scholar]
Natarajan, G., et al.: Engineered strains enhance gold biorecovery from electronic scrap. Miner. Eng. 75, 32–37 (2015) [Google Scholar]
Liow, L.T., et al.: Toolkit development for cyanogenic and gold biorecovery chassis Chromobacterium violaceum. ACS Synth. Biol. 9(4), 953–961 (2020) [PubMed] [Google Scholar]
Buekens, A., Yang, J.: Recycling of WEEE plastics: a review. J. Mater. Cycles Waste Manag. 16(3), 415–434 (2014) [Google Scholar]
Slijkhuis, C.: Recycling plastics from WEEE requiring a sensible and practical approach on POPs. Going Green Care Innovation, Vienna. Austria2018. (2018) [Google Scholar]
Hahladakis, J.N., et al.: An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. J. Hazard Mater. 344, 179–199 (2018) [PubMed] [Google Scholar]
Ru, J., Huo, Y., Yang, Y.: Microbial degradation and valorization of plastic wastes. Front. Microbiol. 11, 442 (2020) [PMC free article] [PubMed] [Google Scholar]
Ali, S.S., et al.: Plastic wastes biodegradation: mechanisms, challenges and future prospects. Sci. Total Environ. 780, pp. 146590. (2021) [PubMed] [Google Scholar]
Raddadi, N., Fava, F.: Biodegradation of oil‐based plastics in the environment: existing knowledge and needs of research and innovation. Sci. Total Environ. 679, 148–158 (2019) [PubMed] [Google Scholar]
Amobonye, A., et al.: Plastic biodegradation: frontline microbes and their enzymes, pp. 143536. Science of The Total Environment; (2020) [PubMed] [Google Scholar]
Othman, A.R., et al.: Microbial degradation of microplastics by enzymatic processes: a review. Environ. Chem. Lett. 19, 1–17 (2021) [Google Scholar]
Yoshida, S., et al.: A bacterium that degrades and assimilates poly (ethylene terephthalate). Science. 351(6278), 1196–1199 (2016) [PubMed] [Google Scholar]
Purohit, J., Chattopadhyay, A., Teli, B.: Metagenomic exploration of plastic degrading microbes for biotechnological application. Curr. Genom. 21(4), 253–270 (2020) [PMC free article] [PubMed] [Google Scholar]
Sekhar, V.C., et al.: Microbial degradation of high impact polystyrene (HIPS), an e‐plastic with decabromodiphenyl oxide and antimony trioxide. J. Hazard Mater. 318, 347–354 (2016) [PubMed] [Google Scholar]
Mohan, A.J., et al.: Microbial assisted high impact polystyrene (HIPS) degradation. Bioresour. Technol. 213, 204–207 (2016) [PubMed] [Google Scholar]
Austin, H.P., et al.: Characterization and engineering of a plastic‐degrading aromatic polyesterase. Proc. Natl. Acad. Sci. Unit. States Am. 115(19), E4350–E4357 (2018) [PMC free article] [PubMed] [Google Scholar]
Ma, Y., et al.: Enhanced poly(ethylene terephthalate) hydrolase activity by protein engineering. Engineering. 4(6), 888–893 (2018) [Google Scholar]
Tournier, V., et al.: An engineered PET depolymerase to break down and recycle plastic bottles. Nature. 580(7802), 216–219 (2020) [PubMed] [Google Scholar]
Jaiswal, S., Sharma, B., Shukla, P.: Integrated approaches in microbial degradation of plastics. Environ. Technol. Innovat. 17, 100567 (2020) [Google Scholar]
Skariyachan, S., et al.: Recent advances in plastic degradation‐From microbial consortia‐based methods to data sciences and computational biology driven approaches. J. Hazard Mater. 426, 128086 (2021) [PubMed] [Google Scholar]
Olson, D.G., et al.: Recent progress in consolidated bioprocessing. Curr. Opin. Biotechnol. 23(3), 396–405 (2012) [PubMed] [Google Scholar]
McCarty, N.S., Ledesma‐Amaro, R.: Synthetic biology tools to engineer microbial communities for biotechnology. Trends Biotechnol. 37(2), 181–197 (2019) [PMC free article] [PubMed] [Google Scholar]
Salvador, M., et al.: Microbial genes for a circular and sustainable bio‐PET economy. Genes. 10(5), 373 (2019) [PMC free article] [PubMed] [Google Scholar]
Ballerstedt, H., et al.: MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX‐UP started January 2020. Environ. Sci. Eur. 33(1), 1–9 (2021) [PMC free article] [PubMed] [Google Scholar]
Pant, D., Giri, A., Dhiman, V.: Bioremediation techniques for E‐waste management. In: Varjani, S.J., et al. (eds.) Waste bioremediation, pp. 105–125. Springer Singapore, Singapore: (2018) [Google Scholar]
Singh, N., et al.: Toxicity trends in E‐Waste: a comparative analysis of metals in discarded mobile phones. J. Hazard Mater. 380, 120898 (2019) [PubMed] [Google Scholar]
Ma, C., et al.: Chemical recycling of brominated flame retarded plastics from e‐waste for clean fuels production: a review. Renew. Sustain. Energy Rev. 61, 433–450 (2016) [Google Scholar]
Singh, N., et al.: Characterizing the materials composition and recovery potential from waste mobile phones: a comparative evaluation of cellular and smart phones. ACS Sustain. Chem. Eng. 6(10), 13016–13024 (2018) [Google Scholar]
Ahmed, T., et al.: Bioremediation approaches for E‐waste management: a step toward sustainable environment. In: Hashmi, M.Z., Varma, A. (eds.) Electronic waste pollution: environmental occurrence and treatment technologies, pp. 267–290. Springer International Publishing, Cham: (2019) [Google Scholar]
Heylen, K., et al.: Safeguarding bacterial resources promotes biotechnological innovation. Appl. Microbiol. Biotechnol. 94(3), 565–574 (2012) [PubMed] [Google Scholar]
Balfour‐Cunningham, A., et al.: Preservation of salt‐tolerant acidophiles used for chalcopyrite bioleaching: assessment of cryopreservation, liquid‐drying and cold storage. Miner. Eng. 106, 91–96 (2017) [Google Scholar]
Spring, S.: 15 preservation of thermophilic microorganisms. Methods Microbiol. 35, 349–368. Academic Press; (2006) [Google Scholar]
Johnson, D.B.: Selective solid media for isolating and enumerating acidophilic bacteria. J. Microbiol. Methods. 23(2), 205–218 (1995) [Google Scholar]
Blackburn, J.W.: Bioremediation scaleup effectiveness: a review. Ann. Finance. 1(4), 265–282 (1998) [Google Scholar]
Sturman, P.J., et al.: Engineering scale‐up of in situ bioremediation processes: a review. J. Contam. Hydrol. 19(3), 171–203 (1995) [Google Scholar]
Danso, D., et al.: New insights into the function and global distribution of polyethylene terephthalate (PET)‐degrading bacteria and enzymes in marine and terrestrial metagenomes. Appl. Environ. Microbiol. 84(8), e02773–17 (2018) [PMC free article] [PubMed] [Google Scholar]
Hillson, N., et al.: Building a global alliance of biofoundries. Nat. Commun. 10(1), 1–4 (2019) [PMC free article] [PubMed] [Google Scholar]
Knight, T.: Idempotent vector design for standard assembly of biobricks (2003) [Google Scholar]
Silva‐Rocha, R., et al.: The Standard European Vector Architecture (SEVA): a coherent platform for the analysis and deployment of complex prokaryotic phenotypes. Nucleic Acids Res. 41(D1), D666–D675 (2012) [PMC free article] [PubMed] [Google Scholar]
Heap, J.T., et al.: A modular system for Clostridium shuttle plasmids. J. Microbiol. Methods. 78(1), 79–85 (2009) [PubMed] [Google Scholar]
Vasudevan, R., et al.: CyanoGate: a modular cloning suite for engineering cyanobacteria based on the plant MoClo syntax. Plant Physiol. 180(1), 39–55 (2019) [PMC free article] [PubMed] [Google Scholar]
Kane, A.L., et al.: Toward bioremediation of methylmercury using silica encapsulated Escherichia coli harboring the mer operon. PLoS One. 11(1), e0147036 (2016) [PMC free article] [PubMed] [Google Scholar]
Duprey, A., et al.: “NiCo Buster”: engineering E. coli for fast and efficient capture of cobalt and nickel. J. Biol. Eng. 8(1), 1–11 (2014) [PMC free article] [PubMed] [Google Scholar]
Yan, L., et al.: Integration of a gold‐Specific whole E. coli cell sensing and adsorption based on bioBrick. Int. J. Mol. Sci. 19(12), 3741 (2018) [PMC free article] [PubMed] [Google Scholar]
Chiu, F.W.Y., Stavrakis, S.: High‐throughput droplet‐based microfluidics for directed evolution of enzymes. Electrophoresis. 40(21), 2860–2872 (2019) [PMC free article] [PubMed] [Google Scholar]
Ilyas, S., et al.: Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy. 88(1‐4), 180–8 (2007) [Google Scholar]
Shah, M.B., et al.: Development of two‐step process for enhanced biorecovery of Cu–Zn–Ni from computer printed circuit boards. J. Biosci. Bioeng. 120(2), 167–173 (2015) [PubMed] [Google Scholar]
Published on 15.7.2020 in Vol 22, No 7 (2020): July Preprints (earlier versions) of this paper are available at https://preprints.jmir.org/preprint/19274, first published April 14, 2020.
E-Waste: A Global Hazard Author links open overlay panelDevin N. Perkins BS 1, Marie-Noel Brune Drisse MS 1, Tapiwa Nxele MS 1, Peter D. Sly MD 2
A simplified method to evaluate the recycling potential of e-waste Author links open overlay panelXianlai Zeng a, Fang Wang a, Jinhui Li a, Ruying Gong b
https://www.greene.gov.in/wp-content/uploads/2020/12/2020120929.pdf
E-waste in the international context – A review of trade flows, regulations, hazards, waste management strategies and technologies for value recoveryAuthor links open overlay panelI.M.S.K. Ilankoon a b, Yousef Ghorbani c, Meng Nan Chong a b d, Gamini Herath b e, Thandazile Moyo f, Jochen Petersen f
Parajuly, K., Kuehr, R., Awasthi, A. K., Fitzpatrick, C., Lepawsky, J., Smith, E., ... & Zeng, X. (2019). Future e-waste scenarios.112. … There is e-waste produced in the manufacturing process as well as … electronics, it isincreasingly common for countries that are still developing to possess electronic goods (Larrdis, 2011…
Global corporate social responsibility initiatives for reluctant businesses AR Khan, Z Yu, M Panait, LR Janjua, A Shah – 2021
Evaluation of e-waste management systems in Malaysia using life cycle assessment and material flow analysisAuthor links open overlay panelHaikal Ismail a b, Marlia M. Hanafiah a
Nita, A. Empowering Impact Assessments Knowledge and International Research Collaboration—A Bibliometric Analysis of Environmental Impact Assessment Review Journal. Environ. Impact Assess. Rev. 2019, 78, 106283. [Google Scholar] [CrossRef]
The Economic Times Tech, 2020. Mobiles part of ‘most dangerous’ e-waste as India turns litterbug Google Scholar
Balde, C., Forti, V., Gray, V., Kuehr, R., Stegmann, P., 2017. The global e-waste monitor 2017. http://collections.unu.edu/eserv/UNU:6341/Global-E-waste$_Monitore$_2017__$electronic$_$single$_$pages$_$.pdf. 10.1016/j.proci.2014.05.148 Google Scholar
Rautela, S. Arya, S. Vishwakarma, J. Lee, K.-H. Kim, S. Kumar E-waste management and its effects on the environment and human health Sci. Total Environ. (2021), p. 145623
N. Soetrisno, J.M. Delgado-Saborit Chronic exposure to heavy metals from informal e-waste recycling plants and children’s attention, executive function and academic performance Sci. Total Environ., 717 (2020), p. 137099
Needhidasan, M. Samuel, R. Chidambaram Electronic waste - an emerging threat to the environment of urban India J. Environ. Heal. Sci. Eng., 12 (2014), pp. 1-9
Dupont, S. Arnout, P.T. Jones, K. Binnemans Antimony recovery from end-of-life products and industrial process residues: a critical review J. Sustain. Metall., 2 (2016), pp. 79-103.

How to cite this article

APA

Ganesh, R. (2024). Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry, 10(01), 29-42.

MLA

Ganesh, R. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry, vol. 10, no. 01, 2024, pp. 29-42.

Chicago

R Ganesh. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry 10, no. 01 (2024): 29-42.

Vancouver

Ganesh R. Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry. 2024;10(01):29-42.

BibTeX

@article{GaneshR2024,
author = {R Ganesh},
title = {Electronic Waste: A Critical Non-Renewable Pollutant},
journal = {International Journal of Environmental Chemistry},
year = {2024},
volume = {10},
number = {01},
pages = {29--42},
issn = {2456-5245},
url = {https://journalspub.com/publication/uncategorized/article=6629}
}

R Ganesh | International Journal of Environmental Chemistry | Vol 10, Issue 01 | pp. 29-42 | ISSN: 2456-5245

Abstract

Keywords

E-waste, Environmental impacts, Health impacts, Legal instruments, Policy, Pollution

🔒 This is a subscription article

Full text is available to subscribers and institutional members. Please choose an option below to access it.

Subscribe Purchase this article Institutional / Login access

References

Forti, V., et al.: The Global E‐waste monitor 2020: quantities, flows and the circular economy potential (2020) [Google Scholar]
Cucchiella, F., et al.: Recycling of WEEEs: an economic assessment of present and future e‐waste streams. Renew. Sustain. Energy Rev. 51, 263–272 (2015) [Google Scholar]
Kaza, S., et al.: What a waste 2.0: a global snapshot of solid waste management to 2050. World Bank Publications; (2018) [Google Scholar]
Kaya, M.: Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. Waste Manag. 57, 64–90 (2016) [PubMed] [Google Scholar]
Singh, N., Duan, H., Tang, Y.: Toxicity evaluation of E‐waste plastics and potential repercussions for human health. Environ. Int. 137, 105559 (2020) [PubMed] [Google Scholar]
Tsydenova, O., Bengtsson, M.: Chemical hazards associated with treatment of waste electrical and electronic equipment. Waste Manag. 31(1), 45–58 (2011) [PubMed] [Google Scholar]
Cesaro, A., et al.: A relative risk assessment of the open burning of WEEE. Environ. Sci. Pollut. Control Ser. 26(11), 11042–11052 (2019) [PMC free article] [PubMed] [Google Scholar]
Rautela, R., et al.: E‐waste management and its effects on the environment and human health. Sci. Total Environ. 773, 145623 (2021) [PubMed] [Google Scholar]
Baldé, C.P.: The global e‐waste monitor 2017: quantities, flows and resources. United Nations University, International Telecommunication Union, and (2017) [Google Scholar]
Zeng, X., Mathews, J.A., Li, J.: Urban mining of E‐waste is becoming more cost‐effective than virgin mining. Environ. Sci. Technol. 52(8), 4835–4841 (2018) [PubMed] [Google Scholar]
Kaya, M.: 3 ‐ current WEEE recycling solutions. In: Vegliò, F., Birloaga, I. (eds.) Waste electrical and electronic equipment recycling, pp. 33–93. Woodhead Publishing; (2018) [Google Scholar]
Rawat, S., Verma, L., Singh, J.: Environmental hazards and management of E‐waste. Environmental concerns and sustainable development, pp. 381–398. Springer; (2020) [Google Scholar]
Sahajwalla, V., Gaikwad, V.: The present and future of e‐waste plastics recycling. Current Opinion in Green and Sustainable Chemistry. 13, 102–107 (2018) [Google Scholar]
Ahirwar, R., Tripathi, A.K.: E‐waste management: a review of recycling process, environmental and occupational health hazards, and potential solutions. Environmental Nanotechnology, Monitoring & Management. 15, 100409 (2021) [Google Scholar]
Zhang, L., Xu, Z.: A review of current progress of recycling technologies for metals from waste electrical and electronic equipment. J. Clean. Prod. 127, 19–36 (2016) [Google Scholar]
Gadd, G.M.: Metals, minerals and microbes: geomicrobiology and bioremediation. Microbiology. 156(3), 609–643 (2010) [PubMed] [Google Scholar]
Mishra, D., et al.: Bioleaching: a microbial process of metal recovery; a review. Met. Mater. Int. 11(3), 249–256 (2005) [Google Scholar]
Cui, J., Zhang, L.: Metallurgical recovery of metals from electronic waste: a review. J. Hazard Mater. 158(2‐3), 228–56 (2008) [PubMed] [Google Scholar]
Srichandan, H., et al.: Bioleaching approach for extraction of metal values from secondary solid wastes: a critical review. Hydrometallurgy. 189, 105122 (2019) [Google Scholar]
Valix, M.: Bioleaching of electronic waste: milestones and challenges. Current developments in biotechnology and bioengineering, pp. 407–442. Elsevier; (2017) [Google Scholar]
Islam, A., et al.: Advances in sustainable approaches to recover metals from e‐waste‐A review. J. Clean. Prod. 244, 118815 (2020) [Google Scholar]
Mudila, H., et al.: E‐waste and its hazard management by specific microbial bioremediation processes. In: Microbial rejuvenation of polluted environment, pp. 139–166. Springer; (2021) [Google Scholar]
Zhao, F., Wang, S.: Bioleaching of electronic waste using extreme acidophiles. Electronic Waste Management and Treatment Technology, pp. 153–174. Elsevier; (2019) [Google Scholar]
Wang, X., Gaustad, G.: Prioritizing material recovery for end‐of‐life printed circuit boards. Waste Manag. 32(10), 1903–1913 (2012) [PubMed] [Google Scholar]
Arshadi, M., Mousavi, S.: Simultaneous recovery of Ni and Cu from computer‐printed circuit boards using bioleaching: statistical evaluation and optimization. Bioresour. Technol. 174, 233–242 (2014) [PubMed] [Google Scholar]
Ilyas, S., Lee, J.‐c.: Bioleaching of metals from electronic scrap in a stirred tank reactor. Hydrometallurgy. 149, 50–62 (2014) [Google Scholar]
Wang, J., et al.: Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J. Hazard Mater. 172(2‐3), 1100–5 (2009) [PubMed] [Google Scholar]
Liang, G., Mo, Y., Zhou, Q.: Novel strategies of bioleaching metals from printed circuit boards (PCBs) in mixed cultivation of two acidophiles. Enzym. Microb. Technol. 47(7), 322–326 (2010) [Google Scholar]
Brierley, J., Brierley, C.: Present and future commercial applications of biohydrometallurgy. Hydrometallurgy. 59(2‐3), 233–9 (2001) [Google Scholar]
Xiang, Y., et al.: Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage. J. Hazard Mater. 184(1–3), 812–8 (2010) [PubMed] [Google Scholar]
Wu, W., et al.: Bioleaching of copper from waste printed circuit boards by bacteria‐free cultural supernatant of iron–sulfur‐oxidizing bacteria. Bioresources and Bioprocessing. 5(1), 1–13 (2018) [Google Scholar]
Sadeghabad, M.S., Bahaloo‐Horeh, N., Mousavi, S.M.: Using bacterial culture supernatant for extraction of manganese and zinc from waste alkaline button‐cell batteries. Hydrometallurgy. 188, 81–91 (2019) [Google Scholar]
Jiang, L.‐L., et al.: Advances in industrial microbiome based on microbial consortium for biorefinery. Bioresources and bioprocessing. 4(1), 1–10 (2017) [PMC free article] [PubMed] [Google Scholar]
Işıldar, A., et al.: Two‐step bioleaching of copper and gold from discarded printed circuit boards (PCB). Waste Manag. 57, 149–57 (2016) [PubMed] [Google Scholar]
Kaksonen, A.H., et al.: Recent progress in biohydrometallurgy and microbial characterisation. Hydrometallurgy. 180, 7–25 (2018) [Google Scholar]
Arshadi, M., Mousavi, S.: Multi‐objective optimization of heavy metals bioleaching from discarded mobile phone PCBs: simultaneous Cu and Ni recovery using Acidithiobacillus ferrooxidans. Separ. Purif. Technol. 147, 210–219 (2015) [Google Scholar]
Arshadi, M., Mousavi, S., Rasoulnia, P.: Enhancement of simultaneous gold and copper recovery from discarded mobile phone PCBs using Bacillus megaterium: RSM based optimization of effective factors and evaluation of their interactions. Waste Manag. 57, 158–167 (2016) [PubMed] [Google Scholar]
Olson, G., Brierley, J., Brierley, C.: Bioleaching review part B. Appl. Microbiol. Biotechnol. 63(3), 249–257 (2003) [PubMed] [Google Scholar]
Brierley, C.L., Brierley, J.A.: Progress in bioleaching: part B: applications of microbial processes by the minerals industries. Appl. Microbiol. Biotechnol. 97(17), 7543–7552 (2013) [PubMed] [Google Scholar]
Johnson, D.B.: Biomining—biotechnologies for extracting and recovering metals from ores and waste materials. Curr. Opin. Biotechnol. 30, 24–31 (2014) [PubMed] [Google Scholar]
Schippers, A., et al.: Biomining: metal recovery from ores with microorganisms. Geobiotechnology I, 141, 1–47 (2013) [PubMed] [Google Scholar]
Gericke, M., Neale, J.W., van Staden, P.J.: A Mintek perspective of the past 25 years in minerals bioleaching. Journal of the Southern African Institute of Mining and Metallurgy. 109, 567–85 (2009) [Google Scholar]
Miller, P.C.: The design and operating practice of bacterial oxidation plant using moderate thermophiles(the BacTech process). In: Rawlings, D.E. (ed.) Biomining: theory, microbes and industrial processes, pp. 81–102. Springer Berlin Heidelberg, Berlin: (1997) [Google Scholar]
Kwok, R.: Inner Workings: how bacteria could help recycle electronic waste. Proc. Natl. Acad. Sci. Unit. States Am. 116(3), 711–713 (2019) [PMC free article] [PubMed] [Google Scholar]
Baniasadi, M., et al.: Closed‐loop recycling of copper from waste printed circuit boards using bioleaching and electrowinning processes. Waste and Biomass Valorization. 12(6), 3125–3136 (2021) [Google Scholar]
De Lorenzo, V., et al.: The power of synthetic biology for bioproduction, remediation and pollution control: the UN's Sustainable Development Goals will inevitably require the application of molecular biology and biotechnology on a global scale. EMBO Rep. 19(4), e45658 (2018) [PMC free article] [PubMed] [Google Scholar]
Capeness, M.J., Horsfall, L.E.: Synthetic biology approaches towards the recycling of metals from the environment. Biochem. Soc. Trans. 48(4), 1367–1378 (2020) [PMC free article] [PubMed] [Google Scholar]
Diep, P., Mahadevan, R., Yakunin, A.F.: Heavy metal removal by bioaccumulation using genetically engineered microorganisms. Front. Bioeng. Biotechnol. 6, 157 (2018) [PMC free article] [PubMed] [Google Scholar]
Sharma, P., et al.: Metal and metal (loids) removal efficiency using genetically engineered microbes: applications and challenges. J. Hazard Mater. 416, 125855 (2021) [PubMed] [Google Scholar]
Johnston, C.W., et al.: Gold biomineralization by a metallophore from a gold‐associated microbe. Nat. Chem. Biol. 9(4), 241–243 (2013) [PubMed] [Google Scholar]
Wu, C.H., et al.: Engineering plant‐microbe symbiosis for rhizoremediation of heavy metals. Appl. Environ. Microbiol. 72(2), 1129–1134 (2006) [PMC free article] [PubMed] [Google Scholar]
Aminian‐Dehkordi, J., et al.: A systems‐based approach for cyanide overproduction by Bacillus megaterium for gold bioleaching enhancement. Front. Bioeng. Biotechnol. 8, 528 (2020) [PMC free article] [PubMed] [Google Scholar]
Zhu, N., Zhang, B., Yu, Q.: Genetic engineering‐facilitated coassembly of synthetic bacterial cells and magnetic nanoparticles for efficient heavy metal removal. ACS Appl. Mater. Interfaces. 12(20), 22948–22957 (2020) [PubMed] [Google Scholar]
Kusano, T., et al.: Electrotransformation of Thiobacillus ferrooxidans with plasmids containing a mer determinant. J. Bacteriol. 174(20), 6617–6623 (1992) [PMC free article] [PubMed] [Google Scholar]
Peng, J.‐B., Yan, W.‐M., Bao, X.‐Z.: Expression of heterogenous arsenic resistance genes in the obligately autotrophic biomining bacterium Thiobacillus ferrooxidans. Appl. Environ. Microbiol. 60(7), 2653–2656 (1994) [PMC free article] [PubMed] [Google Scholar]
Gumulya, Y., et al.: In a quest for engineering acidophiles for biomining applications: challenges and opportunities. Genes. 9(2), 116 (2018) [PMC free article] [PubMed] [Google Scholar]
Liu, R., Li, J., Ge, Z.: Review on Chromobacterium violaceum for gold bioleaching from E‐waste. Procedia Environmental Sciences. 31, 947–953 (2016) [Google Scholar]
Natarajan, G., Ting, Y.‐P.: Pretreatment of e‐waste and mutation of alkali‐tolerant cyanogenic bacteria promote gold biorecovery. Bioresour. Technol. 152, 80–85 (2014) [PubMed] [Google Scholar]
Tay, S.B., et al.: Enhancing gold recovery from electronic waste via lixiviant metabolic engineering in Chromobacterium violaceum. Sci. Rep. 3(1), 1–7 (2013) [PMC free article] [PubMed] [Google Scholar]
Natarajan, G., et al.: Engineered strains enhance gold biorecovery from electronic scrap. Miner. Eng. 75, 32–37 (2015) [Google Scholar]
Liow, L.T., et al.: Toolkit development for cyanogenic and gold biorecovery chassis Chromobacterium violaceum. ACS Synth. Biol. 9(4), 953–961 (2020) [PubMed] [Google Scholar]
Buekens, A., Yang, J.: Recycling of WEEE plastics: a review. J. Mater. Cycles Waste Manag. 16(3), 415–434 (2014) [Google Scholar]
Slijkhuis, C.: Recycling plastics from WEEE requiring a sensible and practical approach on POPs. Going Green Care Innovation, Vienna. Austria2018. (2018) [Google Scholar]
Hahladakis, J.N., et al.: An overview of chemical additives present in plastics: migration, release, fate and environmental impact during their use, disposal and recycling. J. Hazard Mater. 344, 179–199 (2018) [PubMed] [Google Scholar]
Ru, J., Huo, Y., Yang, Y.: Microbial degradation and valorization of plastic wastes. Front. Microbiol. 11, 442 (2020) [PMC free article] [PubMed] [Google Scholar]
Ali, S.S., et al.: Plastic wastes biodegradation: mechanisms, challenges and future prospects. Sci. Total Environ. 780, pp. 146590. (2021) [PubMed] [Google Scholar]
Raddadi, N., Fava, F.: Biodegradation of oil‐based plastics in the environment: existing knowledge and needs of research and innovation. Sci. Total Environ. 679, 148–158 (2019) [PubMed] [Google Scholar]
Amobonye, A., et al.: Plastic biodegradation: frontline microbes and their enzymes, pp. 143536. Science of The Total Environment; (2020) [PubMed] [Google Scholar]
Othman, A.R., et al.: Microbial degradation of microplastics by enzymatic processes: a review. Environ. Chem. Lett. 19, 1–17 (2021) [Google Scholar]
Yoshida, S., et al.: A bacterium that degrades and assimilates poly (ethylene terephthalate). Science. 351(6278), 1196–1199 (2016) [PubMed] [Google Scholar]
Purohit, J., Chattopadhyay, A., Teli, B.: Metagenomic exploration of plastic degrading microbes for biotechnological application. Curr. Genom. 21(4), 253–270 (2020) [PMC free article] [PubMed] [Google Scholar]
Sekhar, V.C., et al.: Microbial degradation of high impact polystyrene (HIPS), an e‐plastic with decabromodiphenyl oxide and antimony trioxide. J. Hazard Mater. 318, 347–354 (2016) [PubMed] [Google Scholar]
Mohan, A.J., et al.: Microbial assisted high impact polystyrene (HIPS) degradation. Bioresour. Technol. 213, 204–207 (2016) [PubMed] [Google Scholar]
Austin, H.P., et al.: Characterization and engineering of a plastic‐degrading aromatic polyesterase. Proc. Natl. Acad. Sci. Unit. States Am. 115(19), E4350–E4357 (2018) [PMC free article] [PubMed] [Google Scholar]
Ma, Y., et al.: Enhanced poly(ethylene terephthalate) hydrolase activity by protein engineering. Engineering. 4(6), 888–893 (2018) [Google Scholar]
Tournier, V., et al.: An engineered PET depolymerase to break down and recycle plastic bottles. Nature. 580(7802), 216–219 (2020) [PubMed] [Google Scholar]
Jaiswal, S., Sharma, B., Shukla, P.: Integrated approaches in microbial degradation of plastics. Environ. Technol. Innovat. 17, 100567 (2020) [Google Scholar]
Skariyachan, S., et al.: Recent advances in plastic degradation‐From microbial consortia‐based methods to data sciences and computational biology driven approaches. J. Hazard Mater. 426, 128086 (2021) [PubMed] [Google Scholar]
Olson, D.G., et al.: Recent progress in consolidated bioprocessing. Curr. Opin. Biotechnol. 23(3), 396–405 (2012) [PubMed] [Google Scholar]
McCarty, N.S., Ledesma‐Amaro, R.: Synthetic biology tools to engineer microbial communities for biotechnology. Trends Biotechnol. 37(2), 181–197 (2019) [PMC free article] [PubMed] [Google Scholar]
Salvador, M., et al.: Microbial genes for a circular and sustainable bio‐PET economy. Genes. 10(5), 373 (2019) [PMC free article] [PubMed] [Google Scholar]
Ballerstedt, H., et al.: MIXed plastics biodegradation and UPcycling using microbial communities: EU Horizon 2020 project MIX‐UP started January 2020. Environ. Sci. Eur. 33(1), 1–9 (2021) [PMC free article] [PubMed] [Google Scholar]
Pant, D., Giri, A., Dhiman, V.: Bioremediation techniques for E‐waste management. In: Varjani, S.J., et al. (eds.) Waste bioremediation, pp. 105–125. Springer Singapore, Singapore: (2018) [Google Scholar]
Singh, N., et al.: Toxicity trends in E‐Waste: a comparative analysis of metals in discarded mobile phones. J. Hazard Mater. 380, 120898 (2019) [PubMed] [Google Scholar]
Ma, C., et al.: Chemical recycling of brominated flame retarded plastics from e‐waste for clean fuels production: a review. Renew. Sustain. Energy Rev. 61, 433–450 (2016) [Google Scholar]
Singh, N., et al.: Characterizing the materials composition and recovery potential from waste mobile phones: a comparative evaluation of cellular and smart phones. ACS Sustain. Chem. Eng. 6(10), 13016–13024 (2018) [Google Scholar]
Ahmed, T., et al.: Bioremediation approaches for E‐waste management: a step toward sustainable environment. In: Hashmi, M.Z., Varma, A. (eds.) Electronic waste pollution: environmental occurrence and treatment technologies, pp. 267–290. Springer International Publishing, Cham: (2019) [Google Scholar]
Heylen, K., et al.: Safeguarding bacterial resources promotes biotechnological innovation. Appl. Microbiol. Biotechnol. 94(3), 565–574 (2012) [PubMed] [Google Scholar]
Balfour‐Cunningham, A., et al.: Preservation of salt‐tolerant acidophiles used for chalcopyrite bioleaching: assessment of cryopreservation, liquid‐drying and cold storage. Miner. Eng. 106, 91–96 (2017) [Google Scholar]
Spring, S.: 15 preservation of thermophilic microorganisms. Methods Microbiol. 35, 349–368. Academic Press; (2006) [Google Scholar]
Johnson, D.B.: Selective solid media for isolating and enumerating acidophilic bacteria. J. Microbiol. Methods. 23(2), 205–218 (1995) [Google Scholar]
Blackburn, J.W.: Bioremediation scaleup effectiveness: a review. Ann. Finance. 1(4), 265–282 (1998) [Google Scholar]
Sturman, P.J., et al.: Engineering scale‐up of in situ bioremediation processes: a review. J. Contam. Hydrol. 19(3), 171–203 (1995) [Google Scholar]
Danso, D., et al.: New insights into the function and global distribution of polyethylene terephthalate (PET)‐degrading bacteria and enzymes in marine and terrestrial metagenomes. Appl. Environ. Microbiol. 84(8), e02773–17 (2018) [PMC free article] [PubMed] [Google Scholar]
Hillson, N., et al.: Building a global alliance of biofoundries. Nat. Commun. 10(1), 1–4 (2019) [PMC free article] [PubMed] [Google Scholar]
Knight, T.: Idempotent vector design for standard assembly of biobricks (2003) [Google Scholar]
Silva‐Rocha, R., et al.: The Standard European Vector Architecture (SEVA): a coherent platform for the analysis and deployment of complex prokaryotic phenotypes. Nucleic Acids Res. 41(D1), D666–D675 (2012) [PMC free article] [PubMed] [Google Scholar]
Heap, J.T., et al.: A modular system for Clostridium shuttle plasmids. J. Microbiol. Methods. 78(1), 79–85 (2009) [PubMed] [Google Scholar]
Vasudevan, R., et al.: CyanoGate: a modular cloning suite for engineering cyanobacteria based on the plant MoClo syntax. Plant Physiol. 180(1), 39–55 (2019) [PMC free article] [PubMed] [Google Scholar]
Kane, A.L., et al.: Toward bioremediation of methylmercury using silica encapsulated Escherichia coli harboring the mer operon. PLoS One. 11(1), e0147036 (2016) [PMC free article] [PubMed] [Google Scholar]
Duprey, A., et al.: “NiCo Buster”: engineering E. coli for fast and efficient capture of cobalt and nickel. J. Biol. Eng. 8(1), 1–11 (2014) [PMC free article] [PubMed] [Google Scholar]
Yan, L., et al.: Integration of a gold‐Specific whole E. coli cell sensing and adsorption based on bioBrick. Int. J. Mol. Sci. 19(12), 3741 (2018) [PMC free article] [PubMed] [Google Scholar]
Chiu, F.W.Y., Stavrakis, S.: High‐throughput droplet‐based microfluidics for directed evolution of enzymes. Electrophoresis. 40(21), 2860–2872 (2019) [PMC free article] [PubMed] [Google Scholar]
Ilyas, S., et al.: Bioleaching of metals from electronic scrap by moderately thermophilic acidophilic bacteria. Hydrometallurgy. 88(1‐4), 180–8 (2007) [Google Scholar]
Shah, M.B., et al.: Development of two‐step process for enhanced biorecovery of Cu–Zn–Ni from computer printed circuit boards. J. Biosci. Bioeng. 120(2), 167–173 (2015) [PubMed] [Google Scholar]
Published on 15.7.2020 in Vol 22, No 7 (2020): July Preprints (earlier versions) of this paper are available at https://preprints.jmir.org/preprint/19274, first published April 14, 2020.
E-Waste: A Global Hazard Author links open overlay panelDevin N. Perkins BS 1, Marie-Noel Brune Drisse MS 1, Tapiwa Nxele MS 1, Peter D. Sly MD 2
A simplified method to evaluate the recycling potential of e-waste Author links open overlay panelXianlai Zeng a, Fang Wang a, Jinhui Li a, Ruying Gong b
https://www.greene.gov.in/wp-content/uploads/2020/12/2020120929.pdf
E-waste in the international context – A review of trade flows, regulations, hazards, waste management strategies and technologies for value recoveryAuthor links open overlay panelI.M.S.K. Ilankoon a b, Yousef Ghorbani c, Meng Nan Chong a b d, Gamini Herath b e, Thandazile Moyo f, Jochen Petersen f
Parajuly, K., Kuehr, R., Awasthi, A. K., Fitzpatrick, C., Lepawsky, J., Smith, E., ... & Zeng, X. (2019). Future e-waste scenarios.112. … There is e-waste produced in the manufacturing process as well as … electronics, it isincreasingly common for countries that are still developing to possess electronic goods (Larrdis, 2011…
Global corporate social responsibility initiatives for reluctant businesses AR Khan, Z Yu, M Panait, LR Janjua, A Shah – 2021
Evaluation of e-waste management systems in Malaysia using life cycle assessment and material flow analysisAuthor links open overlay panelHaikal Ismail a b, Marlia M. Hanafiah a
Nita, A. Empowering Impact Assessments Knowledge and International Research Collaboration—A Bibliometric Analysis of Environmental Impact Assessment Review Journal. Environ. Impact Assess. Rev. 2019, 78, 106283. [Google Scholar] [CrossRef]
The Economic Times Tech, 2020. Mobiles part of ‘most dangerous’ e-waste as India turns litterbug Google Scholar
Balde, C., Forti, V., Gray, V., Kuehr, R., Stegmann, P., 2017. The global e-waste monitor 2017. http://collections.unu.edu/eserv/UNU:6341/Global-E-waste$_Monitore$_2017__$electronic$_$single$_$pages$_$.pdf. 10.1016/j.proci.2014.05.148 Google Scholar
Rautela, S. Arya, S. Vishwakarma, J. Lee, K.-H. Kim, S. Kumar E-waste management and its effects on the environment and human health Sci. Total Environ. (2021), p. 145623
N. Soetrisno, J.M. Delgado-Saborit Chronic exposure to heavy metals from informal e-waste recycling plants and children’s attention, executive function and academic performance Sci. Total Environ., 717 (2020), p. 137099
Needhidasan, M. Samuel, R. Chidambaram Electronic waste - an emerging threat to the environment of urban India J. Environ. Heal. Sci. Eng., 12 (2014), pp. 1-9
Dupont, S. Arnout, P.T. Jones, K. Binnemans Antimony recovery from end-of-life products and industrial process residues: a critical review J. Sustain. Metall., 2 (2016), pp. 79-103.

How to cite this article

APA

Ganesh, R. (2024). Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry, 10(01), 29-42.

MLA

Ganesh, R. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry, vol. 10, no. 01, 2024, pp. 29-42.

Chicago

R Ganesh. “Electronic Waste: A Critical Non-Renewable Pollutant.” International Journal of Environmental Chemistry 10, no. 01 (2024): 29-42.

Vancouver

Ganesh R. Electronic Waste: A Critical Non-Renewable Pollutant. International Journal of Environmental Chemistry. 2024;10(01):29-42.

BibTeX

@article{GaneshR2024,
author = {R Ganesh},
title = {Electronic Waste: A Critical Non-Renewable Pollutant},
journal = {International Journal of Environmental Chemistry},
year = {2024},
volume = {10},
number = {01},
pages = {29--42},
issn = {2456-5245},
url = {https://journalspub.com/publication/uncategorized/article=6629}
}

Enter the destination URL

URL

Link Text

Open link in a new tab

Or link to existing content

No search term specified. Showing recent items.