All articles
714 articles
-
A study on C, H and L type prismatic buildings for Synoptic wind flow.
Abstract: The atmospheric boundary layer can be defined as part of the troposphere at the lowest level which is influenced by the presence of the earth’s surface, and responds to surface forcing within a timescale of about an hour or less. The boundary layer depth might differ from hundreds of meters to a few kilometers. The wind that blows due to Atmospheric Boundary Layer is known as synoptic wind. Moreover, thunderstorms …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 6–14 Read article
-
Effect of Alccofine on Durability Properties of Concrete
Abstract: Alccofine is a mineral admixture use in concrete for production of workable and durable concrete. It is effective in all belongings of concrete in fresh and hardened state. In this study alccofine 1203 used for inspection the characteristics of concrete in aspects of durability. Alccofine 1203 obtained from Ambuja cement plant in the form of fine powder. The percentage of alccofine mixed in concrete as 3-15% in interval of 3% …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 23–31 Read article
-
Use of Recycled Aggregates in Concrete to Achieve Characteristic Strength M50 with Addition to Steel Fibre
Abstract: Concrete is World’s second most consumed material after water, use of recycled aggregate (RA) in concrete can be useful for environmental protection. Recycled aggregates are the materials for the future. Aggregate is one of the main ingredients in producing concrete. It covers 75% of the total for any concrete mix. The strength of the concrete depends on the properties of aggregates used. The experimental analysis comprise with normal RAC and …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 1–8 Read article
-
INVESTIGATION OF STEEL FIBER REINFORCED CONCRETE CORBELS BY EXPERIMENTAL AND ANALYTICAL METHOD
Abstract: In the present paper, an experimental results and predicted values by truss analogy method, ACI Building Code (ACI 381-83) provisions for corbels, and method given by Fattuhi is investigated. The concrete used in the corbels is of M-60 grade. Test were carried out on 27 samples of size 150 x 150 x 200- mm were shear span was varied from 175 to 200 as shown in table (5) and concrete …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 23–29 Read article
-
EXPERIMENTAL INVESTIGATION ON GEOPOLYMER CONCRETE
Abstract: The project report entitled “Experimental investigation on alkali activated concrete” describes the detailed experimental work carried out on Alkali Activated Alumina-silicate concrete [Provis and Deventer, 2009]. The fly ash- Ground Granulated Blast Furnace Slag (GGBFS) based Alkali Activated Alumina-silicate concrete cured at ambient temperature was prepared by using different molarities of Alkali Activated solution namely 8M, 12M and 16M. The properties of concrete such as workability, compressive strength, Pull-out test/bond …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 17–22 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Effect of Replacing Rice Husk Ash with Cement and Granulated Blast Furnace Slag with Fine Aggregates on High Performance Concrete
Abstract: Cement and sand are the basic materials for any concrete construction. Now a day’s due to erosion of rivers and considering environmental issues, there is a scarcity of river sand. Many researchers are finding different materials to replace sand and one of the major materials considered in this study is granulated blast furnace slag (GBFS). In recent times, instead of cement many alternative materials are being used as the binding …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 30–35 Read article
-
A Prologue Study for Feasibility of Passage for Urban Mass Transit System in Dahod City
Abstract: Economic growth and prosperity of a nation widely depends on cities and towns. These cities and towns generates almost two third of the country’s income and 90% of government revenues, while only one third of India’s total population lives in cities and towns. As India is becoming more urbanized, the economic growth of the nation will be dependent on urban areas. The momentum of economic growth can only be sustained …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 1, 2020 · pp. 24–32 Read article
-
Clash Detection in Appropriate Technology Building Using Building Information Modelling (BIM)
Abstract: Building Information modelling (BIM) is a highly efficient software in Architecture, Engineering and construction (AEC industry). Clash detection technique is used to minimize the error as well as to minimize the cost and time. Especially in 2D drawings, lots of problems emerges at the time of execution. One of the best tools used in this project is clash detection tool which coordinates the building system in 3D models. This clash …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 15–24 Read article
-
Object Reconstruction Using Phone and Compact Camera
Abstract: Previously, a 3D model can be produced by using high resolution and metric camera in close range photogrammetry technique. In this study, there were two types of camera used; the compact camera (Nikon COOLPIX L120) and phone camera (Samsung Galaxy Note1). Two objects were selected; i.e., a biscuit container as for simulation and water tank as the real object. 3D models for both objects were validated by using a measuring …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 21–30 Read article
-
Effect of encroaching vehicles on capacity of signalized intersections in mixed traffic conditions
Abstract: This paper estimates capacity of signalized intersections in heterogeneous traffic conditions considering the effect of encroaching vehicles. Accurate estimation of capacity of signalized intersections plays vital role in evaluating performance of whole road network. In the present paper two sets of saturation flow values are estimated separately by considering and not considering the effect of encroaching vehicles. Also, the capacity of the signalized intersections is found considering the effect of …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 1, 2020 · pp. 1–8 Read article
-
Determination of the optimum magnetic exposure time for magnetic water concrete
Abstract: The purpose of this study was to investigate the effect of magnetic water on the workability and compressive strength of concrete, and also to find the optimum time for exposing water to magnetic field, for which maximum compressive strength of concrete will be achieved. In this research, water was exposed to magnetic field of 336mT per magnet for a duration of 12, 18, 24, 36, and 96 hours, after which …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 34–42 Read article
-
Thermo-elastic flexural analysis of cross-ply laminated beams
Abstract: The present paper is concerned with the thermal analysis of symmetric and antisymmetric cross ply laminated beams subjected to temperature distribution across the thickness of laminated beam. A higher order shear deformation theory is used. The displacement field in terms of thickness coordinate is expanded up to cubic term to have a quadratic variation of the transverse shear strains and transverse shear stresses. This avoids the need of shear correction …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 62–73 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article
-
Influence of land use changes on Urban flooding - Case study of Bangalore city, India
Abstract: In past few years, Bangalore city is facing the flood disasters frequently during monsoon seasons. The land use change study is carried out for the most flood prone watersheds in the city for the years 1995, 2000, 2005, 2010, 2015 and 2018. Google earth image is used to investigate the land use changes using Google pro tool. The study has showed an increasing imperviousness in the study area of Koramangal-Chellaghatta …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 50–61 Read article
-
Challenges in implementing an Opportunistic Adaptation approach in Bangkok
Abstract: The 2011 floods should have been a wake-up call for Bangkok, yet the question is what the situation is now, eight years later. Did this disaster cause a change in our attitude to climate change or not? Opportunistic adaptation (OA) is a tool used in urban planning, designed to help stakeholders share a common vision of what/when/where can happen in the future, given uncertain conditions like, e.g., climate change. The …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 28–45 Read article
-
DETERMINATION OF MEAN VELOCITY OF FLOW USING FINITE DIFFERENCE METHOD
Abstract: The objective of the study is to establish the optimal method for determination of Mean velocity of flow. The values of hydraulic parameters such as Channel slope, Discharge of flow, Mean depth of flow and Mean velocity of flow are obtained in laboratory observations. And the value of mean velocity of flow is obtained using the finite difference method. The comparative analysis is done between the theoretical and practical observations …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 46–49 Read article
-
DRIP IRRIGATION BY RECYCLING WASTEWATER
Abstract: Drip irrigation allows water to drip slowly to the roots of plants thus saving water, nutrients and minimizing evaporation. This study focusses on treatment of contaminated water by reducing biological oxygen demand (BOD), chemical oxygen demand (COD), eutrophication of water bodies and further using it for drip irrigation.
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 17–27 Read article
-
Review on Seismic Behavior of Structure with Transfer Floor and Transfer Girder: a Finite Element Static and Dynamic Analysis
Abstract: ABSTRACTThe construction of high-rise buildings has presented the engineers with various challenges like the provision of gathering halls and parking floors accompanied with residential apartments and hotel suites on the next floors. This provision requires different column positioning on different floors. For construction of these structures with vertical irregularities, transfer floor or transfer girder is provided between these different column arrangements. This paper aims at studying "seismic analysis of multistory …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 1–7 Read article
-
PREDICTION OF RECYCLED CONCRETE AGGREGATE SELF COMPACTING CONCRETE COMPRESSIVE STRENGTH USING MATHEMATICAL MODEL
Abstract: Sustainable Development aims at improving the standard of life without compromising the environmental qualities and for future needs. These objectives can be achieved through recycling of construction/demolished waste. In Past, land filling of Construction and Demolished waste materials was the general solution. As raw Construction Material Charges have risen dramatically, we have to look for alternative solutions and methods, such as recycling of demolished waste. Recycled Aggregate Concrete not only …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 34–43 Read article