All articles
714 articles
-
Review on Seismic Analysis of Overhead Storage Reservoir
Abstract: Water is a human basic need for daily life. Sufficient water distribution in a certain area is depending on the design of a water tank. An overhead water tank is a large water storage container constructed to hold water supply at a certain height to pressurization of the water distribution system. Thus Water tanks are very important for public utility and industrial structure. Huge water mass concentrated at the top …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 25–33 Read article
-
Experimental Study of Self –Healing in Reinforced Concrete Flexural Elements
Abstract: Concrete structural elements undergo cracking under tensile stresses which can adversely affect the performance of these members. The increased availability of design solutions facilitating the self-healing of the cracked concrete elements can lead to the enhancement of the service life of concrete structures. This paper presents the findings of an experimental study where shape memory materials such as Constantan and Nitinol wires have been used in flexural concrete elements. Tests …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 12–24 Read article
-
Comparative Study on Reinforced Cement Concrete Structures and Concrewall Structures
Abstract: Developing countries especially those in India, are facing the challenge of a growing middle class with greater demand for housing facilities. Faster and more affordable methods of construction are being sought after it, more than ever before as the action of emergency response. Increased innovation aimed at reducing the cost of construction, and creating affordable housing, is being integrated into methods of building and construction. This has led to introduction …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 2, 2019 · pp. 8–11 Read article
-
Replacement of Natural Fine Aggregate by Copper Slag
Abstract: This paper presents the applications of replacement of natural fine aggregate using copper slag. The study is conducted by replacing the fine aggregate from 0 to 100% at the interval of 20% on M25 grade concrete and 1.8% superplasticizer by weight of cement. The compressive strength, split tensile strength and flexural test is studied and reported. It is observed that replacement of natural fine aggregate at 40% (CS40) gives higher …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 23–28 Read article
-
Experimental Study on Partially Replacement of Fine Aggregate & Coarse aggregate by Waste Marble with addition of S-Fiber
Abstract: Today’s world is a concrete jungle. With the ever increasing population of the world, in general and the developing countries there is the tremendous pressure on the Civil Engineer to develop a cost effective as well as ecofriendly structure to fulfill the need of the human being. Concrete is a heterogeneous mixture of binding material (cement or lime), coarse aggregates, fine aggregates (sand) and water. Fine and coarse aggregates are …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 1–9 Read article
-
Compressive Behaviour of Lightweight Aggregate Concrete by Blending LECA
Abstract: Present work deals with the lightweight aggregate concrete (LWAC) by using Lightweight Expanded Clay Aggregate (LECA) as lightweight aggregate, LECA is used as replacement to the natural coarse aggregate in the concrete, in this experimental work percentage of lightweight aggregates are varied to study the change in the properties of concrete made by blending LECA. LECA content was varied from 20% to 100% at an increment of 20%. Total 6 …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 10–15 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
EFFECT OF FLY- ASH AND CEMENT ON EXPANSIVE SOIL FOR FLEXIBLE PAVEMENT DESIGN
Abstract: Out of the many types of soils that prevail on the Earth’s crust Expansive soils are observed to be highly problematic by nature. Particularly under conditions of loading, these soils are highly prone to fail due to shear, crushing or excessive settlement. These factors end up expansive soils as unsuitable soils for any construction. If the strength of the soil is poor, then soil stabilization is duly needed. Stabilization is …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 48–55 Read article
-
PLASTICITY EVALUATION ON THE HETEROGENEITY OF SAND AND SILTY CLAY FORMATION IN DELTAIC ENVIRONMENT
Abstract: This paper evaluates the level of heterogeneity impact of atterberg limit of the formation; the study analyzed eight locations to determine their plastic limit, liquid limits and plastic index, values generated from different location reflect the behaviour of sand and silty clay base on the experimental data, fluctuation were experiences from 0.2 – 2.5m in all the locations, it generated the lowest and the highest range from LL30-45, PL, 21-31, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 15–22 Read article
-
Effects of granulated waste glass and micro steel fiber on shear strength parameters of sand
Abstract: During the construction of the various structures, soil strength plays a vital role in structural performance. Hence, soil improvement techniques are needed to improve soil strength as well. This study aimed to improve shear strength of sandy soil using Granulated waste glass (GWG) and Micro steel fiber (MSF). In order to apply this idea, there have been taken two kinds of sandy soil such as fine sand (locally available in …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 35–42 Read article
-
Soft Computing Based Prediction of Ultimate Bearing Capacity of Footings Resting on Rock Masses
Abstract: The present study attempts to predict the ultimate bearing capacity of shallow foundations on rock masses using five different soft computing techniques namely i) random forest regression approach, ii) artificial neural networks, iii) support vector machine with polykernel, iv) support vector machine with (radial basis function) RBF kernel and v) M5P model tree. The ultimate bearing capacity was assumed to be dependent rock mass rating, unconfined compressive strength of rock, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 1–14 Read article
-
Neural network based prediction of shear wave velocity for soils
Abstract: The paper presents a study on the prediction of the shear wave velocity (Vs) for all soils using ANN model from cone penetration test data. The input parameters in the obtained of ANN models were vertical effective stress, sleeve friction, cone tip resistance and output was the shear wave velocity. These parameters were considered to construct the ANN model which has 3-2-1 topology in prediction of shear wave velocity. Further, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 23–34 Read article
-
FLUENT ANALYSIS ON EARTH HEAT EXCHANGER WHERE AIR AS A FLOW MEDIUM
Abstract: Renewable energy is the best source of energy. It is abundant in nature, it’s just like a gift of god. Nowadays, heating and cooling is a major issue in environment due to global warming. A major part of energy is being engaged in such issues. So Earth tube heat exchanger is a renewable source of energy for heating and cooling of any building. Here, in this study we will perform …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 43–68 Read article
-
Implementation of Airport Construction Management
Abstract: In this article, Micro PAVER is used to analyze present condition of Neil Armstrong airport facilities. It also predicts the future condition and develop ways for pavement maintenance based on available funds and conditions. The airport infrastructure system is divided into several networks, branches, sections, sample units and the types, severity of distresses are identified for those units. Weather, traffic and maintenance are considered to develop prediction model for pavement …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 64–75 Read article
-
Design and Construction of an Excavation Supported by Temporary Soldier-Pile Wall for Urban Road Corridor
Abstract: This study addresses a temporary shoring system design used in the construction of an urban road corridor in four areas, with a total length of about 93 m and excavation heights of 5.2 m and 8.5 m. A comparison was made between the original design and a present study. The first condition was calculated manually following Brazilian standards, while the last one was made through computational programs, following the recommendations …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 36–63 Read article
-
NIGERIAN PUBLIC PROCUREMENT ACTS AND PROFESSIONALISM: AN ENGINEERING PERSPECTIVE FOR OPTIMAL PERFORMANCE
Abstract: Professional in the field of engineering must embraced the utilization of public procurement act in Nigeria for optimal performance. This paper assessed the performance of Public Procurement Reforms in Nigeria based on engineering perspective. This act followed a World Bank Country Procurement Assessment survey conducted in 1999 established the link between poor public procurement procedures and corruption. The Assessment Report revealed that 60% was being lost to corrupt practices out …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 28–35 Read article
-
Research on Accessibility of Public Transport Based on Secondary Development of GISDK – An application of Shanghai
Abstract: Using the technology based on AMAP Web API, the primary traffic data such as the locations of physical bus stations and route directions were captured, and the bus GIS database was established in TransCAD which was used to analyze the accessibility of urban public transport networks. The secondary development function of GISDK was used to create a public transport accessibility evaluation system. Taking the public transport network of four districts …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 22–38 Read article
-
Hydrodynamic Modeling for contaminant spills Case study: Nile River - Upper Egypt
Abstract: Most watercourses are subjected to the threats of contaminant spills. The Nile River is the main drinking and irrigation water source for all Egyptian cities around its banks, especially in Upper Egypt. The southern reach receives considerable amounts of agricultural, industrial and municipal wastes at different sites along its mainstream. The goal of this research is to simulate contaminant spill in the studied part of the Nile River to determine …
Published in International Journal of Water Resources Engineering · Vol. 5, Issue 2, 2019 · pp. 1–16 Read article
-
Comparative Assessment of Tensile and Shear Behavior of Cold, Warm and Hot Mix Asphalt Concrete
Abstract: The environment awareness of toxic gases emissions during the production, transportation, and construction of hot mix asphalt concrete (HMAC) have led to the development of Warm, half warm, and cold mix asphalt concrete. Such development of alternative mixtures is considered as sustainable materials in asphalt concrete paving process. The temperature reduction in the mixing of binder during production, handling, and compaction of the mix results in saving energy, reduction of …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 39–47 Read article
-
Field Assessment of Runway Pavement Surface Texture for Baghdad International Airport
Abstract: One of the major serviceability issues which reflects the suitability of the airport runway for serving international flights is the surface texture of concrete pavement. The concrete surface of the runway 33R-15L of Baghdad international airport is badly covered with large spots of aeroplanes tyre rubber. The international flight companies had claimed that the rough surface of the runway concrete pavement caused damage and deterioration to their aeroplane’s tyres. The …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 2, 2019 · pp. 6–21 Read article