All articles
714 articles
-
Physical Property of Self-Curing Concrete With Shrinkage Reducing Agent
Abstract: Water is a most widely used material for construction work, it is essential for concreting work or plastering work, etc. Curing is the process for controlling the temperature and consists of moisture movement from and into the concrete and the hydration of the cement and consequently continuous increase in the strength and Curing allows continuous hydration of cement, when curing stops strength increasing of the concrete also stops. The aim …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 29–33 Read article
-
Evaluation of Strength in Natural Bricks by Using Mineral Admixtures
Abstract: In the construction field nowadays substructures and superstructure are adopted by bricks only for the framed type of structure and also load bearing wall adopted for bricks in super structure works. Last four decades in our Tamil Nadu more number of bricks were used for the buildings. In this work, it is decided to design an alternate to clayey soil with addition of stabilisers such as fly ash, rice husk …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 85–89 Read article
-
Retrofitting of Existing Building by Concrete Jacketing
Abstract: Seismic Retrofitting is engineered mitigation techniques for structural engineers. It is defined as the modification of existing structures to make them more resistant to seismic activity, ground motion or soil failures due to earthquakes. It is generally required for earthquake damaged and vulnerable buildings with no exposure to severe earthquakes. Retrofit enhances the structural capabilities of the building. In present time, there are many local and global retrofit techniques in …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 49–84 Read article
-
Self-Curing of Concrete Incorporated with Polyethylene Glycol
Abstract: Concrete is a combined mixture of cement, aggregates and water with or without suitable admixtures. Curing is the process of sustaining the proper moisture content to stimulate optimum cement hydration immediately after placement and to achieve desirable strength and other properties. In conventional curing of concrete, this is achieved by external supply of water after mixing, placing and finishing of concrete. In practice, the conventional type of curing is very …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 35–48 Read article
-
Study of Different Types of Concrete
Abstract: The main objective of the present paper is to study about the different types of concrete and its use according to its properties in different areas in our thesis we have briefly discussed about the property of the concrete. In this thesis, the use of concrete along with the addition of other material to make is more economical for the use and to get proper strength with addition of the …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 70–76 Read article
-
Suitability of Bamboo as a Reinforcing Material in Flexible Pavement Design
Abstract: In Engineering Programme, soil stabilizations very much important for gaining proper knowledge about ground improvement. Ground improvement technique is one of the challenging task involving inputs from geotechnical engineering sector. In our project, we had to go through different techniques for improving the engineering characteristics of the ground. Through this project an endeavor attempt was made to improve the ground using bamboo as a reinforcing material for flexible pavement considering …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 47–69 Read article
-
Condition Assessment of Structures Using Vibration Technique
Abstract: Structural Health Monitoring grasps the Promise for enhancing the structural performance with an outstanding cost/benefit ratio. Condition assessment is a technique used in health monitoring in the damage detection, to ensure the serviceability and the durability of the structures. In the present report, condition assessment of the structures using low frequency technique is being completed through experimental modal analysis and computational analysis software ANSYS 9.0 over structural elements beam and …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 36–46 Read article
-
Analysis of Economical Design of RCC Water Tanks of Different Shapes
Abstract: The various overhead water tanks are constructed for direct distribution by gravity flow without pumping and are usually of capacities ranging from 50 to 3000 KL. All the tanks are designed as crack free structures to reduce any leakage. The present article gives in brief, the theory behind the design of liquid retaining structure (circular water tank with flexible and rigid base and rectangular underground water tank). The present paper …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 29–35 Read article
-
Prediction and Assessment of Lateral Displacement of Rock Mass Along the Length of the Horseshoe Cavern – A Numerical Modelling Approach
Abstract: The stability of the underground structures is a key to successful underground mining. Caverns are large underground openings constructed in rock mass for a variety of purposes. The properties of intact rock mass are generally overshadowed by the properties of discontinuities, if the discontinuities are present. Mechanisms of deformation and failure of underground openings in jointed rock mass are determined by the characteristics of the geometrical distribution of discontinuities. This …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 17–28 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
Study on Analysis and Design in Reinforcement Structure Joints of Water Tank Structure for Safety Human life
Abstract: A water tank is used to store water to surge over the daily requirement. In the construction of concrete structure for the storage of water and other liquids the imperviousness of concrete is most essential. The permeability of any uniform and thoroughly compacted concrete of given mix proportions is mainly dependent on water cement ratio. The increase in water cement ratio results in increase in the permeability. The decrease in …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 16–28 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
Study and Characterisitics of Different GVF Profile of Rectangular Channel
Abstract: This technical note presents the equation for one-dimensional gradually-varied steady flow profiles with constant discharge, in a rectangular-section prismatic channel of constant roughness and small longitudinal slope. The flow profile differential equation was transformed by means of a polynomial approximation and then, by an algebraic procedure followed by the integration of the equation, the solution was obtained. This solution was applied to a particular case which, through a comparative analysis, …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 24–34 Read article
-
Comparison of R.C.C. Frames with Rectangular and Special Shaped Columns
Abstract: In general, the R.C.C. framed structure are constructed using square, rectangular or circular columns. But the columns may be constructed of any shape. In this study, an effort has been made to study the behavior of R.C.C. framed structure by replacement of regular rectangular columns with special shaped column (like L, T, + shaped columns). Total 8 structures have been compared having different combinations of column, response spectrum of each …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 57–66 Read article
-
A Review Study on Comparative Seismic Analysis of Irregular Shaped Multi-storeyed Structure With and Without Infill
Abstract: In this study, we focused on the behavior of infill wall and plan irregularity on seismic performance of multi-storeyed high rise structure during various earthquake ground motions. A mostly L shaped structure; residential type structure with 15 storeys has been modelled with all its parameters. This structure includes four lifts/wells in its entire plan at mid-section and parking is provided at the base storey. A regular plan with the same …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 45–56 Read article
-
Comparative Static Analysis of Flat Slab Without Periphery of Beam Provided Infill and Shear Wall Panel at Different Storey
Abstract: In this paper, increased awareness for the need to evaluate and improve the seismic performance of flat slab without periphery of beam. There are several numbers of factors affecting the behavior of building. Stiffness irregularity in vertical direction is one of them, and as a result of which soft storey is formed. In the this paper work a parametric study is performed on flat slab without periphery beam with infill …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 37–44 Read article
-
Development of Attenuation Relationships for Underground Blasts: Different Equations
Abstract: Blasting operation becomes essential for excavation in weathered and hard rock strata for construction and mining activities. The Indian Standard and industrial practice of establishing the site specific attenuation relationship recommend Power form of relationship between the PPV the scaled distance with an exponent of 2/3 (IS) and 1/2 (industrial practice). In this paper, three different equation forms and five different exponents were explored for modelling the aforementioned relationship for …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 8–16 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Utilization of Steel Slag as Course Aggregate
Abstract: Concrete is the third largest material consumed by human being after food and water as per WHO. Concrete plays a vital role in the design and construction of the nation’s infrastructure. Almost three quarters of the volume of concrete is composed of aggregate. These are obtained from natural rocks and river beds, thus degradation them slowly. This issue of environment degradation, and need for aggregates demands for the usage of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 14–18 Read article