All articles
484 articles
-
Modelling and Analysis of Pressure Distribution of a Honing Machine Tool
Abstract: In the honing machining process it is very important that tool should with stand the pressure to create the pattern inside the cylinder. This project deals with the reverse engineering process, and selecting the appropriate pressure for honing tool and simulations are done at different pressure readings and the result of Forces on the component so that the productivity of the machine is improved. To achieve this we take a …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 43–50 Read article
-
Optimization of 3D Printed Two-wheeler Suspension System
Abstract: The suspension is the very important criteria of a two-wheeler in order to improve the comfort for the operator or rider of the two-wheeler. In most of the two-wheeler’s shock absorbers are used as a suspension system to smooth out or damp shock impulse and dissipate energy by use of spring’s compression and relaxation property. The system consists of a spring which allows the frame and vehicle intact while riding …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 51–57 Read article
-
Energy Audit: A Case Study of C-Block of GCET Campus
Abstract: This paper presents energy audit of college premises (GCET Institute). Energy audit includes an in-depth examination of consumption in electric power, value of this power consumption, and lastly, a steered program for changes in operating practices or power intense instrumentation that may effectively save the value. The energy audit could be a positive involvement with a major blessing to varsity. The review method begins by gathering knowledge concerning facility’s operation …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 26–32 Read article
-
Integrated Flyback Converter with MPPT Control for Photovoltaic Applications
Abstract: This study consists of the analysis and modeling of a maximum power point tracking (MPPT)-controlled flyback integrated converter for a photovoltaic system. Here MPPT is used to maximize power withdrawal under all certain conditions such as when the solar radiation is less. MPPT introduced in photovoltaic system also tracks the regularly fluctuating maximum power point. Buck-boost flyback integrated converter is used as a DC-DC converter in the proposed system. This …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 33–40 Read article
-
Different Energy Efficiency Techniques for Coal Fired Power Plants
Abstract: Recent survey and studies on saving of electricity have concluded that the significant portion of electricity is being wasted due to improper use of electrical appliances, mainly in residential buildings and office buildings. The power plants using the old techniques which produce not only less efficient output but also lot of emission of harmful gases. Coal-fired plants are the major electricity supplier; at the same time, it is responsible for …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 16–25 Read article
-
Optimization of Dynamic Load Carrying Capacity of Tapered Roller Bearing Using Advanced Optimization Technique
Abstract: In the design of tapered roller bearings, long life is the one of the most important criterion. Roller bearings are used mostly in mechanical equipment due to its low friction capability. Tapered roller bearing is selected and the objective function is to maximize dynamic load capacity. Design variables for the bearing include four geometrical parameters: the bearing pitch diameter, the diameter of the roller, the effective length of the roller, …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 23–42 Read article
-
Load Frequency Control of Interconnected Power System by Conventional and Facts Devices
Abstract: The stability of power systems has been and continues to be of major concern in system operation. Modern electrical power systems have grown to a large complexity due to increasing interconnections, installation of large generating units, and extra-high voltage tie lines, etc. Transient stability is the ability of the power system to maintain synchronism when subjected to a severe transient disturbance, such as a fault on transmission facilities, sudden loss …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 9–15 Read article
-
Three-Level Interleaved Boost Converter with Irradiance Adaptive Controller for Solar Power Utilization
Abstract: Solar energy conversion through photovoltaic is a rapidly growing source of green power supply. Therefore, improving the efficiency of PV system is considered as an important factor in supporting this trend. However, this concerns not only the improvement of PV cells, but also the efficiency of the power electronics circuits and the controls associated with them. Also, the PV modules are operated at low voltage levels, therefore, large voltage boosting …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 2, 2018 · pp. 1–8 Read article
-
A Review of Different Iris Recognition Systems
Abstract: Recognition of a person based on the iris structure has become a trending authentication method. Iris recognition systems have many advantages as compared to other authentication methods such as accuracy, reliability and uniqueness and hence it is used in many applications. The main applications are, access control in laboratories and factories, identification for Automatic Teller Machines (ATMs), banks etc., border control in airports and harbors. This paper deals with the …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 16–22 Read article
-
Meta-Heuristic Technique Based Intelligent Overcurrent and Distance Relay Co-ordination with Novel Relay Minimization Technique
Abstract: Relay coordination is an important aspect to maintain proper power system operation and control. Relays must be organized in such a way that every main relay should have a backup relay and co-ordination time interval (CTI) between primary and back up and different zones of the relays should be maintained to achieve proper fault identification and fault clearance sequences. The relays should operate in minimum desirable time satisfying all the …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 1–15 Read article
-
Secured Data Transmission using 2LSB Steganography
Abstract: Steganography contains transmitting secret messages through seemingly innocuous files. Steganography means hiding information by embedding secret data into an innocuous medium. In this study message bits are embedded randomly to achieve the higher security by combining cryptography and steganography. The contents of a message protect in Cryptography and Steganography is used to protect both messages and communicating parties. 2LSB technique is used to improve data capacity in an image. Selected …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 2, 2018 · pp. 1–5 Read article
-
A Novel Buck-Boost Converter with an Enhanced Negative Output Voltage
Abstract: This paper proposes the theoretical design of a novel buck-boost converter with an enhanced negative output voltage than conventional converters. It is beneficial for applications that require a wide range of conversion ratio. The steady-state as well as power-loss analyses of the proposed converter operating in continuous conduction mode are examined. Comparison with typical negative output converters like the buck-boost converter, self-lift Luo converter and hybrid buck-boost converter is also …
Published in International Journal of Electrical Power System and Technology · Vol. 4, Issue 1, 2018 · pp. 48–60 Read article
-
Modeling of Material Removal Rate in Micro EDM Using Neural Network
Abstract: In micro-electrical discharge machining (Micro EDM) machining, material removal rate (MRR) is the particular main output parameter. Here we will discover various machining parameters get an effect on the particular MRR. For production industries, to maximize the results from Micro EDM, appropriate predictive designs for MRR must end up being constructed. This particular report utilizes neural network modeling to predict MRR over the particular machining time for assortment of cutting …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 30–39 Read article
-
Grid-Tied PV System with Small DC-Link Capacitor and Low-Frequency Ripple-Free Maximum Power Point Tracking
Abstract: This paper proposes a grid-tied cascaded multilevel inverter (CMI) PV system based on current-fed dual-active-bridge DC–DC converters using small dc-link capacitors. The CMI has many advantages, such as modularity, low harmonic spectra, high ac voltage application with low device rating, and low electromagnetic interference. In addition, distributed maximum power point tracking (MPPT) terminal for segmented photovoltaic (PV) arrays can be achieved by CMI PV converter. The low-frequency ripple-free MPPT is …
Published in International Journal of Electrical Power System and Technology · Vol. 4, Issue 1, 2018 · pp. 39–47 Read article
-
Cluster-Based Secure Communication Using Short Path Selection in MATLAB
Abstract: The wireless sensor networks (WSNs) consists of several autonomous sensor nodes with sensing, processing and wireless communication capabilities. In this work, the sensor network security issues are resolved in clustered network when a new node enters into the network. In this present work, two-stage authenticated communication is defined. The first-level authentication is applied between the base station and the cluster head. In this process, the public key cryptography is applied …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 21–29 Read article
-
Transformer-Less Dynamic Voltage Restorer Employing an Asymmetrical Seven-Level Inverter with Reduced Number of Switches for Improving Power Quality
Abstract: In modern power system, power quality is one of the major concerns. It has become important, especially with the introduction of smart grid, grid-connected renewable energy systems and sophisticated devices, whose performance is very sensitive to the quality of power supply that results in a failure of end-use equipment. One of the major power quality disturbance dealt here is the voltage sag. To solve this problem, custom power devices are …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 31–38 Read article
-
Assessment of MPPT-Based Photovoltaic System: A Critical Review
Abstract: In this paper, new approaches are formulated to estimate the parameters and predict the maximum power generated by the PV module at maximum power point under varying environmental conditions. Maximum power point tracking technique is useful for extracting maximum power from PV cell. Here different techniques have been discussed and explained. Keywords: adder, irradiance, maximum power point (MPP), maximum power point tracking (MPPT), photovoltaic (PV)
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 39–49 Read article
-
Transforming an Engineering Campus in Solar Energy Campus with Detailed Energy Audit
Abstract: Energy is the most powerful weapon for the economic development of any country. In the case of the developing countries, the energy sector assumes a critical importance in view of the ever-increasing energy needs requiring huge investments to meet them. By reducing the cost and increasing the efficiency, of the energy the authors can achieve energy conservation, management and audit. The objective of energy management is to achieve and maintain …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 17–20 Read article
-
Validation of Selected SPV Module
Abstract: This paper presents the mathematical modelling and its MATLAB simulation of selected photovoltaic module manufactured by BHEL (SL No.-E1200127, Type-L24170) in which parallel connected solar cell (Np=1) and Series connected solar cell(Ns=72) in order to estimate its behavior of SPV module and Finally compare the simulation results with the live field values measured with the help of Amprobe solar analyzer and Senser (S-4000). Using measured Irradiance(S) and module temperature (Avg. …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
A Low-Carbon Economic-Load Dispatching Using PSO Technique
Abstract: This paper presents the solution of economic-load dispatch problem with quadratic cost function by using particle swarm optimization (PSO). PSO technique is useful at solving optimization problems with both single- and multiple-objective functions with non-convex, discontinuous, noisy and non-differentiable solution. The results show that PSO has the ability of minimizing the cost of productions in power system operations. Carbon emission characteristics of all kinds of power units are analysed against …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 4, Issue 1, 2018 · pp. 17–25 Read article