All articles
110 articles
-
Mechanical and Barrier Properties of LLDPE-LDPE Blend Film with Micro Clay
Abstract: The present study LLDPE-LDPE(50-50 wt%) were compounded with added microclay filler using silicone oil as dispersing agent by twin screw compounding. The three formulations were taken as 1%, 3%, 5% of microclay. The extruded standard has been cut into pellets by cutter. Then films were made using blown film extrusion and then tested. As the filler content increases, the flow behaviour of the film increases. Tensile strength increases upto 1% …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 38–46 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article
-
Studies of meta-materials
Abstract: AbstractMeta-materials are artificial composites designed to operate electromagnetic property. Properties of wave nature manipulation have originated fashioned fabrication. This has to perform as rigorous as subjected under adoption specific optical or microwave or acoustic provision. Fabrication has precision formof shape, geometry, size, orientation and arrangement of materials.Applicationof meta-materialsincludes super resolution imaging and optical as well acoustic sensing. Decay, separate and couple among as split transverse electric and magnetic to that …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 47–52 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
A-Survey on Natural Fibers
Abstract: In the last thirty years of composite materials, ceramics and plastics have been important emerging materials. The number of application of composite materials has been grown consistently, penetrating and winning new market requirement continuously. The composite materials forms a significant proportion of the engineered materials their worth as weight saving materials; the present aim is to make them as cost effective. This survey paper discuss about worldwide collection of natural …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 17–28 Read article
-
Mechanical characterization of hybrid natural fibre composites developed through compression moulding process
Abstract: Increasing environmental concerns these days due to excessive consumption of fossil-fuel products have impacted our atmosphere, which has led several researchers to work in the field of polymer composites reinforced by natural fibres. In this research, the emphasis is on developing the completely biodegradable green composites using polylactic acid (PLA) as a matrix and reinforcement with jute and sisal fiber by compression molding method and effect of various parameters on …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 29–35 Read article
-
Calculate the natural frequencies with Cracked for Hybrid Unidirectional Composite Plate
Abstract: A mathematical model was built by using ANSYS (2D, 3D) models and MATLAB to represent composite materials. The natural frequencies were calculated for type of composite plates with of boundary conditions clamped from each edge (CCCC). In the vibration analysis, the finite element and MATLAB results showed there was an increase in the first, second and third natural frequencies by increasing the volumetric fraction of the fiber.In the cracked plate, …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 5–16 Read article
-
Dynamic Behavior of Hybrid Unidirectional Without Cracked Composite Plate
Abstract: The composite material is one of the most common materials used in engineering applications due to the wide range of properties, high strength, cheap, easy to manufacture and lightweight. Therefore, many studies and researches have been conducted and are currently being conducted to obtain the appropriate mathematical models that describe the behavior of these materials when exposed to different types of mechanical loads. A mathematical model was built by using …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 36–47 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Emerging Smart Materials: Recent Development in Self-healing Elastomers
Abstract: Smart materials based on olefins, diolefins, renewable materials and others reactive monomers are witnessing a rapid growth across different applications sectors such as electronics, health care, automotive, textile, building, construction, agriculture & Energy. Materials development is currently moving at high pace both in academia and in industry due to their diverse commercial potential and beneficial merit for the society. Self – healing elastomers have emerged as high potential materials among …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Thermo-Mechanical Properties of Banana and Jute Fiber Reinforced Polypropylene Composites
Abstract: Abstract Present research aims at finding out better fiber reinforcement for low cost and eco-friendly polymer matrix composite. Polypropylene was chosen as a matrix, while jute and banana fiber were chosen as reinforcement. Composites were prepared by using a hot press machine. Fiber loading was varied at 0, 4 and 8 volume%. Both raw jute and banana fiber was chemically treated with 5 wt% sodium carbonate and composites were also …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 37–47 Read article
-
Experimental Optimization of Process Parameters for Tape Wound Composite Cylindrical Shells by using Taguchi Method
Abstract: The purpose of this paper is to design and construct laminated composite cylindrical shells. Tape wound layup method is implemented for the preparation of composite laminated shells by E-glass fiber mat and Epoxy resin as adhesive. The shells were made by considering two parameters p1-diameter of mandrel and parameter p2- stacking sequence. As per the L9 orthogonal array the required diameter and stacking sequence was arranged. The composite shells were …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 18–26 Read article
-
Failure Prediction of Composite Lamina
Abstract: Composite materials are preferable in many applications of engineering than their metallic equivalent. These materials provide desirable characteristics and required properties for specific design and testing. In orthotropic fiber composites, the fiber orientation dictates the material properties, because the properties can be built into the laminate during fabrication. In this study, a composite laminate is tested with a specific configuration whether it would fail or survive under specific load. If …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 27–36 Read article
-
Finite Element Analysis of Composite Tube
Abstract: Abstract – In many industries, composite tubes are preferable than other materials, like, aluminum, steel, wood, iron. The durability, strength, stiffness, weather and corrosion resistance of the tubes are required properties in industries. It is fabricated in several layers depending on their functions. In this study, composite tube is modeled using ANSYS software by changing material properties and layer orientation. ANSYS can predict results before fabricating composite sample. The meshed …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 48–59 Read article
-
Mechanical Behavior and Model Fitness of the Natural Fiber Composite: A Study on Orange Peel and Charcoal Composite
Abstract: In this paper, orange peel with charcoal in addition with epoxy resin composite is tested for the behavior of mechanical properties. The results depicted that the best hardness, thickness, tractable flexural are getting for the material organized with the 20 % of weight sustained orange strip epoxy composite. The obtained results were also tested for regression analysis for validate the experimental data for assessment of model fitness. Keywords: natural composite …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 33–42 Read article
-
INFLUENCE OF PROCESS PARAMETERS IN BLANKING USING ANSYS EXPLICIT DYNAMICS
Abstract: The shearing process such as the blanking of sheet metals has been used often to prepare work pieces for subsequent forming operations. In the current literature it prescribes a model investigation of the effect of process parameters influencing the blanking process on the part edge quality of blanked parts. The blanking process model, simulation and optimization are carried out by using CATIA V5R20, explicit dynamics with ANSYS package. The objective …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 4–20 Read article
-
Sliding wear behavior of plasma sprayed NiCrAlY-WC based composite coatings on AA5083 alloy
Abstract: WC based coatings was deposited by thermal spray process have been extensively used in industrial application to counter abrasive type of wear. In this study, for the first time NiCrAlY-WC based composite coatings were deposited on AA5083 substrate by plasma sprayed coating technique. The composite coatings were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and microhardness. Sliding wear behavior of coated and uncoated samples was carried out on …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 21–26 Read article
-
Three body Abrasive wear behavior of A356 Aluminum alloy in different Solution treated condition
Abstract: In the present study, solution treatment of A356 Al alloy was carried out in three different ways namely T4-Solution Treatment – TB Condition, T5-Precipitation (Ageing) – TE Condition and T6-Solution Treatment and Precipitation Hardening – TF Conditions. Three body abrasive tests were carried out for all the solution treated samples as well as base metal. The influence of the heat treatment on the microstructure, hardness and abrasive wear resistance behaviour …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 27–32 Read article
-
Hydraulic Flushing Flux Enhancement Techniques in Membrane Separation Processes: A mini Review
Abstract: Looking into current scenario of the wastewater generated from the allied industries which leads researcher and industry persons to reclaim the water to certain extent. Conventional methods removes the pollutants and toxics to maximum level but quality of water is the must requirement for the industries to work efficiently. Membrane separation processes play vital role in rectifying the conventional method by replacing them to some extent or by hybrid mixture. …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 1–3 Read article