All articles
120 articles
-
Investigation of strength of concrete by replacement of sand with copper slag and cement with sugarcane bagasse ash
Abstract: This investigational study conducted to observe the potential of Sugarcane Bagasse Ash as a cement replacing material which is similar to that of Portland Pozzolana Cement and Copper slag as a fine aggregate replacement material. Seven different concrete mixes with the Bagasse Ash replacement to the Portland Pozzolana cement and copper slag replacement are (5% + 40%, 10% + 15% , 10% + 25% , 10% + 35% , 10% …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 25–38 Read article
-
TO IMPROVE THE EFFICIENCY OF SILICA FUME CONCRETE
Abstract: A suitable introduction of silica fume in concrete improves both the mechanical and chemical properties of the concrete. The long-live compressive strength of silica-fume concrete has been recently questioned by some researchers and they were regular in touch of it.This paper reports the results of compressive strength data on strength of silica which is on 4- to 6-year-old cores attained from well-documented field experiments which where both silica-fume and non-silica …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 39–44 Read article
-
Effect of Accelerated Curing and Normal Curing Regimes on UFGGBFS-Based Semi-Lightweight Concrete
Abstract: This paper deals with the performance of semi-lightweight concrete (sLWC), prepared by using calcite powder pellets as coarse aggregates which was improved by partial replacement of cement with UFGGBFS (ultrafine ground granulated blast-furnace slag). Cement could be replaced by UFGGBFS as 0%, 5%, 10%, 15%, 20%, 25%, 30%, 35%, 40%, 45%, 50%, 55%, 60%, 65%, and 70% to enhance the strength and durability properties of concrete. High-range water-reducing admixtures (HRWA) …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Aerocon Bricks
Abstract: Various low-cost housing projects are considered by a growing demand chiefly due to urbanisation. The collection of building materials should chance the requirements of local conditions to enhance quality of life for the most needed ones by building new structures and/or by improving existing structures. Various studies showed that a big variety of wall materials have been used in different building systems with traditional and modern construction methods, but only …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 37–48 Read article
-
A parametric study for the behaviour of steel plate-anchor assembly embedded in concrete under cyclic loading
Abstract: Steel plate-anchor assembly embedded in concrete is a common type of connection system used for connecting structural steel members to concrete members. These assemblies are subjected to different loading cases depending on their use. Since the behaviour of such assemblies is quite complex and depends on a number of factors associated with different components, it was decided to adopt finite-element technique to obtain a reasonably accurate analytical solution for the …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 21–36 Read article
-
A STUDY ON PRODUCTION OF NEXT GENERATION CONCRETE : GREEN CONCRETE
Abstract: This proposal aims to study the production of eco friendly, sustainable and efficient self healing concrete. Concrete is the most widely used material in construction, concrete is a composite material composed of course aggregates bonded with wet cements which hardens over time. Production of bioconcrete is done in order to reduce the cracks, reduces the corrosion of steel present inside the building. Modern methods of construction and technology have taken …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 17–20 Read article
-
Experimental Investigation On Partial Replacement Of Fine Aggregate By Wood Ash On Concrete
Abstract: This paper intends to investigate the possibility of producing low costs enhanced performance concrete by wood ash. By taking the enormous amount of sand in river beds, it affects the environment badly and demand for fine aggregate is increase day by day. So by partially replacing Prosopis juliflora ash with fine aggregate in construction field, It can serve both the purposes of meeting the demands of construction industry and at …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 10–16 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
Utilization of E-Waste in Concrete
Abstract: E-waste or electronic waste is a term used for discarded electronic products that have become unwanted, non-working or outdated, and have basically touched the end of their useful life. The amount of e-waste materials that needs to be disposed off keeps increasing day by day which make e-waste a developing issue posing serious pollution problems to the mankind and the environment, not only in India but also globally. Reusing e-waste …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 42–49 Read article
-
Utilization of Paper Waste in Making of Cement Concrete
Abstract: Cement manufacturing industry is one of the main carbon dioxide constructing sources moreover burning of fossil fuels and deforestation and concrete industry is one of the major consumers of natural virgin materials. India is the country that is facing a severe contest in the disposing the waste in landfills throughout the country. The landfill disposal is resulting in high disposal costs and potential environmental problems. If the current situation continues, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 36–41 Read article
-
Study on Partial Replacement of Cement by Bagasse Ash in Cement Concrete
Abstract: Today, researchers all over the world are trying to utilize agricultural wastes like corncob ash, rice husk ash, bagasse ash as a partial replacement of cement, thereby reducing cement production and greenhouse gases emissions. Sugarcane bagasse is a fibrous waste product of sugarcane refining industry and being disposed to open landfills causing serious environmental impacts. In this study, Bagasse ash was partially replaced in the ratio of 0%, 5%, 10%, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 29–35 Read article
-
A Technical Analysis of Fly Ash Concrete for Compressive Strength
Abstract: Fly ash is a waste produced by thermal power plants and used as a supplementary cementitious material (SCM) in the production of Portland cement concrete. A supplementary cementitious material, when used in combination with Portland cement, pays to the properties of the hardened concrete through hydraulic or pozzolanic activity, or both. At present fly ash, is a big environmental concern and issues. The analysis presented in this paper is carried …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 21–24 Read article
-
Suitability of Concrete Containing Fly Ash Along with Alccofine
Abstract: With the growing urbanization and rising standard of living and purchasing power of men the demand of concrete does not look to become dormant. But due to limited supply of non-renewable constituents of concrete they are needed to be preserved for the future generation, so there is utmost necessity of using supplementary waste materials in concrete. With advancement in science and technology itis made possible that the waste materials like …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 15–20 Read article
-
Properties of Green Concrete Using Light Weight Aggregates
Abstract: With the growing distress over the needless exploitation of natural aggregates, synthetic lightweight aggregate produced from the environmental waste is a feasible new source of structural aggregate material. Unique with expanding worry over the inordinate misuse of characteristic totals, engineered light weight total delivered from natural waste is a feasible new wellspring of auxiliary total material. The engagements of auxiliary review lightweight cement minimise remarkably the self-heap of a structure …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 11–14 Read article
-
An Experimental Study on Concrete by Replacement of Coarse Aggregate with Demolished Building Waste in Crushed Concrete
Abstract: A large amount of construction and demolition wastes are produced annually in India. These waste materials require a large place to dispose and then the disposal of wastes has become a severe problem. The continuous use of natural resources for making conventional concrete leads to the reduction in their availability and results in the increase of the cost of the coarse aggregate and fine aggregate. The possible use of recycling …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 25–28 Read article
-
Concrete Quality Evaluation Using Non-destructive Test
Abstract: This paper analyses the non-destructive testing (NDT) measurements used to assess on site strength and condition of reinforced concrete. To ascertain the residual strength of concrete, extent of corrosion, it is imperative to assess the health of the RC structural members of a building using State-of-the-art non-destructive testing (NDT). NDT of concrete structure is carried out in order to assess the health of structure without impairment of its desirable properties. …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Empirical Model Relativity of Flexural and Compressive Strength of Concrete Produced with Foundry Waste Sand as Partial Replacement
Abstract: The evaluation presented in this research is to establish the correlation between compressive strength of concrete and flexural strength of concrete of grade 20 at mix ratio of 1:2:4 produced using foundry waste sand as a partial replacement for river sand at different replacement level of 0%, 5%, 10%, 15%, 20% and 25%. The aimed compressive strength was achieved at 15% replacement and the corresponding flexural strength of 3.14 N/mm2was …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 5–10 Read article
-
Modulus of Elasticity of Steel Fiber Reinforced Concrete with Metakaolin
Abstract: In this paper the attempt has been made to study the results of an experimental investigation using steel fiber (SF) and metakaolin (MK) on the properties of structural concrete. Crimped steel fibers of aspect ratio 85 and MK were used in this investigation. The effects of these fiber and MK on workability, density, and on various strengths of M60 grade concrete are studied. Fiber content varies from 2.5% to 10% …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 50–59 Read article
-
Analysis of Gravity Dam for Different Rectangular Openings Sizes
Abstract: Gravity dams are very important structures. Different parameters which come in loading combination are temperature, dead weight, earthquake, hydrostatic pressure and water load. From the study, it has been found that the properties which affect the performance of a dam are static properties and thermal properties. Static properties of the concrete dam are strength, Poisson’s ratio and elastic modulus while thermal properties are specific heat, thermal expansion coefficient, thermal conductivity …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 11–17 Read article
-
Statistical Analysis of Self-Compacting Concrete Impregnated with Coir Fiber
Abstract: Concrete is the construction material widely used throughout the world. Construction materials used in the industry should be friendly with the environment during its usage. Self-compacting concrete (SCC) is an innovative concrete that does not require vibration for placing and compaction. It is able to flow under its own weight, completely filling formwork and achieving full compaction, ev+ en in the presence of congested reinforcement. The hardened concrete is dense, …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 39–49 Read article