All articles
116 articles
-
Investigation On Behavior Of Cold Formed Steel In Beam Column Connections
Abstract: Cold form steel structures are used for numerous purposes in construction industry. An attempt has been made in this study to check the behavior of beam column connections by using self-tapered screw in cold form steel section theoretical, experimentally and analytically. Finally, the experimental results are compared with analytical results. This study aims at the following objective by test performed on cold formed steel section to check the behavior connections. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 66–70 Read article
-
Finite Element Modelling and Structural 3d Static of the Mechanical Behavior of Dry Contacts Slipping Between the Disc and the Brake Pads
Abstract: The aim of this contribution is to present a study based on the determination of the structural deformations due to the contact of slipping between the disc and the pads. The results of contact described in this work relate to displacements, Von Mises stress and contact pressures of the pad at various moments of simulation. One precedes then the influence of some parameters on the computation results such as rotation …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 23–43 Read article
-
3D Stress State Dependent Failure Model for Fracture Simulations
Abstract: The state of stress is defined by triaxiality (hydrostatic pressure) and the lode angle parameter (deviatoric stress third invariant). The stress state not only varies with different kinds of loading but also with the location of the stress concentration, geometry of specimen and deformation. The LS-DYNA implementation of a strain-based, stress state dependent failure criterion for a ductile material is investigated through simulations of standard experiments in this paper. A …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 1, 2016 · pp. 44–65 Read article
-
Flutter study of a solar powered high-altitude long endurance UAV
Abstract: This paper presents an aero-elastic flutter analysis on a high altitude long endurance unmanned air vehicle. Numerical finite element analysis (FEA) based simulations for flutter have been carried using the commercial FEA package ANSYS. Analytical flutter analysis is performed to verify the FEA results. The analytic flutter analysis gives the divergence speed to be 32.7 m/sec. The numerical flutter analysis of the rudder shows the bending and torsional modes for …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 2, 2016 · pp. 01–09 Read article
-
Vibration Analysis of Sandwich Beams Using 3-Noded Beam Element
Abstract: One-dimensional 3-noded finite element model is developed in this paper for the vibrational analysis of composite sandwich beam for various boundary conditions, using the efficient layer wise zigzag theory. To come across the convergence necessities for the weak integral formulation, fifth power Hermite interpolation is utilized for the transverse displacement and quadratic interpolation is utilized for the axial displacement and shear rotation. Element every node has four degrees of freedom. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 2, 2016 · pp. 10–18 Read article
-
Compressive Behaviour of Pristine and Impacted Composite Laminates: Numerical Simulations and Experimental Studies
Abstract: To predict the compressive strength, various failure criteria studied in this article include are Tsai-Wu, Hill, Hoffman, Maximum Stress and Quadratic. The quadratic failure criterion has been implemented using PATRAN Command Language (PCL). Is observed that quadratic failure criterion provides least failure indices, employed for conservative design. The compressive strength of the pristine and impacted laminate computed using analytical experiment, and finite element analysis (Numerical) commercial packages. Experimental program employing …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Minimization Theorem and Fixed-Point Theorem in Probabilistic Metric Space
Abstract: This paper is devoted to the study of the basic theory and applications of probabilistic metric spaces (PM-space). In this paper, the topological structure and properties for PM-space are considered. The conditions of metrization and the form of metric functions for PM-spaces, Menger PM-spaces and probabilistic normed linear spaces (PN-space) are given, and the characterizations of various probabilistically bounded sets are presented. As applications, we utilize these results obtained in …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 2, 2019 · pp. 36–41 Read article
-
Using Six-Node Hexagonal Elements to Perform Free Vibration Analysis of Laminated Composite Conoidal, Elliptical Paraboloid, and Hyperbolic Paraboloid Shells
Abstract: Laminated composite structures are one of the recent developments in the field of engineering with high strength and better cost-to-weight ratio over the isotropic materials. The present study is mainly focused on the free vibration analysis of laminated composite shells using six-node hexagonal elements which is the first one of its kind. Three different shells, namely conoidal, elliptical paraboloid and hyperbolic paraboloid, have been analyzed with different support conditions, and …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 2, 2019 · pp. 42–55 Read article
-
Weight Optimization of Motorcycle Frame by Finite Element Analysis
Abstract: Frame is one of the main components of the two-wheeler vehicle. All the important accessories of the two-wheeler are mounted on the frame. It is subjected to various types of loads which could affect the life of the frame. Therefore, it is necessary to analyze the motorcycle frame for various parameters such as thickness, materials and loading conditions. The optimization of design is very difficult and the effect is little …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 2, 2019 · pp. 1–11 Read article
-
Application of Three-dimensional Differential Transform Method to Dynamic Vibration Analysis of Rectangular Plate Resting on Elastic Foundation
Abstract: Research on vibration analysis of non-homogenous and varying thickness plate has gained a tremendous increment in recent year due to its vast application in many fields of engineering. This study investigate the dynamic behavior of rectangular plate with varying thickness resting on two-parameter foundation under simply supported free edge condition. The governing differential equation is analyzed using three-dimensional differential transform method. The accuracies of the established solutions are verified by …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 2, 2019 · pp. 20–35 Read article
-
A Note on Fixed-Point Theory
Abstract: In this paper, we narrate in brief the origin and step-by-step development of the fixed-point theory which finds its primary applications in functional analysis. It is a sub-branch of the functional analytic theory in which geometric conditions on the mappings and/or underlying spaces play a crucial role. It is also a major branch of nonlinear functional analysis with close ties to Banach space geometry. In this paper, our main focus …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 2, 2019 · pp. 12–19 Read article
-
A Review on Study the Behaviour of the Structure and Transfer Slab under Different Geometric and Material Nonlinearity Consideration
Abstract: The present work concerned with the study on the behaviour of high-rise RCC structure that consists of transfer slab through which the number of columns or shear walls are going to float from certain floor level. The present study gives an overview of different research works on the parameters such as displacement, drift and stiffness in high-rise structure under the consideration of various analyses such as seismic analysis, geometric nonlinear …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 20–27 Read article
-
Study on Electrical Resistivity of Metakaolin Concrete
Abstract: The present work studies the electrical resistivity of metakaolin concrete containing metakaolin at water–binder ratios 0.58, 0.55, 0.50 and 0.45. Cement was replaced with 0%–15% MK. The optimum replacement level was found 10%. Testing included measurement of electrical resistivity (ER), compressive strength and flexural strength (DT); rebound hammer; and ultrasonic pulse velocity test. ER increases with MK content, age and reduction in W/b ratio. The interrelation between ER and compressive …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 28–35 Read article
-
A Review on Comparative Study on Performance of Vertical Cantilever Tuned Mass Damper and Base Isolators in Response Reduction of Multistory Building
Abstract: The present work concerned with the study on the comparison of performance of vertical cantilever beam as tuned mass damper (TMD) and the base isolator in high-rise RCC structure. The vertical TMD will be at the top floor at the position of interior columns and the mass of the TMD will be tuned with the primary structure. The base isolator like sliding bearing system will be designed for a multistory …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 14–19 Read article
-
Seismic Assessment of Reinforced Concrete Structures Coupled with O-Grid Bracing Systems
Abstract: The greatest challenge for structural engineers is to design the structures to be earthquake resistant. Basically, the earthquake-resistant design of reinforced concrete structures is a force-based design. When a structure is designed for seismic resistance, various systems are embedded into the structure so as to resist the lateral forces. One of the systems, which are used for resisting lateral forces, is to provide the structures with different types of bracings. …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 4–13 Read article
-
Common Fixed Point Theorem in 2-Metric Space Satisfying Rational Inequality
Abstract: Some common fixed point theorems using a new technique by altering distance between the points with the help of certain continues control function. On the other hand, some fixed point theorems by using a non monotonic control function and discussed the importance of control function. In this study, using more general condition satisfying rational inequality along with by proving common fixed point theorem in 2-Metric space.
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 5, Issue 1, 2019 · pp. 1–3 Read article