Search
92 articles for “High Strength Concrete”
-
Behavior and Comparison of High Strength Concrete (M45) Using Super Plasticizers (SP 430) As Admixture
Abstract: The Aim of this paper is to study the High Strent gh Concrete of mix design M45 with P.P.C, O.P.C and compare the Mechanical Properties. Admixures have been used for generating High Strength Concrete and optimum dosage. Comparative studies of High Strentgh Concrete using P.P.C, O.P.C and by using 0.5%, and 1% of Super Plasticizer (S.P 430) with O.P.C.
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 1, 2018 · pp. 19–23 Read article
-
Impact of Silica Fume on High-Strength Concrete
Abstract: For many decades, concrete has been the primary material used in construction because of itsreliability under normal conditions. However, certain applications necessitate concrete withexceptionally high compressive strength and durability, particularly in aggressive environments.Consequently, achieving compressive strengths in the range of 60–140 MPa is critical for thesedemanding situations. Silica fume, a by-product of silicon and ferrosilicon smelting processes, hasgained recognition as an effective cementitious material for enhancing concrete properties. Thisdissertation investigates …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 25–31 Read article
-
Behavior and Comparison of Mixture of High Strength Concrete (M45) and Super Plasticizers (SP 430)
Abstract: The aim of this paper is to study the High Strentgh Concrete of mix design M45 with P.P.C, O.P.C and compare the Mechanical Properties. Admixures have been used for generating High Strength Concrete and optimum dosage. Comparative studies of High Strentgh Concrete using P.P.C, O.P.C and by using 0.5%, and 1% of Super Plasticizer (S.P 430) with O.P.C. KEYWORDS: High Strength Concrete, Mechanical Properties, Super Plasticizer-430, PPC,OPC.
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 1, 2018 · pp. 11–17 Read article
-
Laboratory Scale Study on Fly Ash Replacement to Cement in High-Strength Concrete
Abstract: Abstract Concrete, the cornerstone of modern infrastructure, faces increasing environmental impact of cement production calls for sustainable alternatives in construction materials. Primarily due to the high carbon footprint associated with Portland cement production. This review synthesizes existing research and the findings from an experimental study investigating the partial replacement of Ordinary Portland Cement (OPC) with fly ash in high-strength concrete (HSC) of grade M60. The study specifically examines a 50% …
Published in International Journal of Concrete Technology · Vol. 11, Issue 2, 2025 · pp. 22–30 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
MATHEMATICAL MODELING OF FLY ASH AND ALCCOFINE PARTIAL REPLACEMENTS OF CEMENT FOR HIGH COMPRESSIVE CONCRETE STRENGTH
Abstract: Mathematical model was applied to monitor the behaviour of partial replacement of cement with alccofine and flyash, alccofine and fly ash was applied to monitor the variation of strength development in different mixed designed, the study applying such concept has observed these two material to generated high strength development more than the normal strength generated applying cement in full dosage, the detailed sources of these substance such as micro finer …
Published in International Journal of Sustainable Building Technology · Vol. 3, Issue 2, 2020 · pp. 38–56 Read article
-
Modeling Fly Ash and Alccofine Partial Replacement of Concrete Density for High Strength Development
Abstract: This paper monitor the development of density from concrete model partially replaced cement with alccofine and fly ash, the study were generated applying modeling techniques, this concept were adopted to detail the influence of other concrete properties that influenced the growth rate of concrete density generated from such model concrete. Linear influences were observed in all the figures, the study observed variations of growth rate in the study, these are …
Published in International Journal of Sustainable Building Technology · Vol. 3, Issue 1, 2020 · pp. 29–48 Read article
-
Mathematical Model for the Predictionof Compressive Strength of High Performance Concrete (HPC) Containing Saw Dust Ash and Superplasticizer
Abstract: This paper examined the prediction of compressive strength of High Performance Concrete (HPC) containing Saw Dust Ash (SDA) and Conplast SP 430 (superplasticizer), using Osadebe’s regression theory.The model developed was tested for adequacy at 95 % level of confidence using F-Statistic and was found to be reliable. A computer program written in visual basic 6.0 based on the model formulated was invoked for quick prediction of the mix ratios corresponding …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 2, 2020 · pp. 15–28 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Effect of variation of Elevated Temperature on Compressive Strength of Metakolin concrete
Abstract: It has been found that high early temperature has negative impacts on later compressive strength of concrete. Some researchers investigated the adverse effect on long term strength of concrete due to high initial temperature. The effect of temperature on different properties of concrete is considerable and remained the subject of research activities of a lot of researchers. Different investigators moved in different ways and investigated temperature effect by changing different …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 9–16 Read article
-
Cyclic Loading Over “Stress Behaviour of High Strength Fibre (Steel and Glass) Reinforced Concrete
Abstract: Construction spectrum is growing as it has never been before; there is always something under new construction. It is thus very much important to use updated materials in construction to improve usability, workability and durability, along with the increase in characteristic strengths of material with respect to high rise structures specially. Concrete is one such material obtained from mixing of various materials. Concrete is good at compressive strength but shows …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 1, 2017 · pp. 17–31 Read article
-
Performance Analysis of High-Volume Fly Ash and Recycled Aggregate in M50 Concrete: Workability and Compressive Strength
Abstract: Abstract This study evaluates the impact of recycled aggregate (RA) and high-volume fly ash (HVFA) on the workability and compressive strength of M50 grade concrete. Slump tests were conducted for various water-cement ratios, using a mix ratio of 1:0.69:2.29 and a high-range water reducer. The compressive strength of concrete mixtures incorporating varying percentages of RA and FA was measured at 7, 28, and 90 days. Results indicate that replacing natural …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 25–32 Read article
-
TO IMPROVE THE EFFICIENCY OF SILICA FUME CONCRETE
Abstract: A suitable introduction of silica fume in concrete improves both the mechanical and chemical properties of the concrete. The long-live compressive strength of silica-fume concrete has been recently questioned by some researchers and they were regular in touch of it.This paper reports the results of compressive strength data on strength of silica which is on 4- to 6-year-old cores attained from well-documented field experiments which where both silica-fume and non-silica …
Published in International Journal of Concrete Technology · Vol. 5, Issue 1, 2019 · pp. 39–44 Read article
-
Concrete Properties Enhancement with use of Carbon Fibers
Abstract: Concrete standard grade of concrete with high strength with mechanical properties like flexural strength as well as split is a requirement / need for today’s fastest construction work. To improve the mechanical properties there is need for adding fibers in concrete. Distinct fibers available in worldwide out of which carbon fibers had showed very effective solution for enhancing high strength mechanical properties of concrete. In this paper we have designed …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 2, 2021 · pp. 1–8 Read article
-
A Review of Bamboo Fiber’s Use in Concrete
Abstract: AbstractLocal sustainable materials must be found and used in the building and provision of homes due to therising demand for natural resources in emerging nations. Natural building materials that are regardedas sustainable are “green”, thousands of tons of bamboo are traded annually, and this creates a lot ofwaste. Bamboo was utilized in the building’s construction as well as in structural elements like roofing,columns, and supports. The main component utilized in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 33–36 Read article
-
Sugar Powder Impact on Strength of Concrete
Abstract: Abstract This experimental study examines the effect of adding sugar powder to concrete on its compressive strength. The research explores how sugar powder, when used as an additive in concrete mixtures, alters the concrete’s structural performance, particularly in terms of its ability to resist compressive forces. Through systematic testing and analysis, the study aims to determine the extent to which sugar powder can influence the strength and durability of concrete, …
Published in International Journal of Concrete Technology · Vol. 11, Issue 1, 2025 · pp. 15–21 Read article
-
Performance of Metakaolin and GGBS-induced Geopolymer Concrete Under Compression
Abstract: Metakaolin and ground granulated blast furnace slag (GGBS) were used as the source materials to obtain the high strength geopolymer concrete. NaOH and sodium silicate were used as alkaline activators with varying NaOH molarities of 8M, 12M, 14M and 16M. Cubes of size (100x100x100) mm were cast and the four geopolymer mixes were heat cured for varying durations of 24 hours, 48 hours and 72 hours and tested for compressive …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 31–38 Read article
-
Experimental Study on the Properties of Self-Curing Concrete
Abstract: This paper highlights the effect of curing agent polyethylene glycol (PEG-400) in the performance of concrete. The chemical agent PEG is used with different percentage; 1%, 2% and 3% to the weight of cement. Super plasticizer named glenium was used to improve the workability of concrete. The property such as compressive strength and split tensile strength of concrete was examined with normal curing and self-curing at 7 days and 28 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 8–13 Read article
-
Revolutionizing Concrete Strength: The Role of Carbon Nanotube Reinforcements
Abstract: Abstract The integration of carbon nanotubes (CNTs) into concrete represents a revolutionary advancement inconstruction material technology. Carbon nanotubes, known for their exceptional mechanical,electrical, and thermal properties, offer transformative potential for enhancing the strength, durability,and functionality of traditional concrete. This study explores the role of CNTs as a nano-reinforcementmaterial, focusing on their impact on compressive strength, tensile capacity, and resistance to crackingand environmental degradation. By incorporating CNTs, concrete can achieve unprecedentedmechanical …
Published in International Journal of Structural Engineering and Analysis · Vol. 11, Issue 1, 2025 · pp. 27–31 Read article