Search
257 articles for “commercialization”
-
Atomic Layer Etching and its Characteristic
Abstract: Atomic layer etching (ALE) is most advanced etching technique for removing thin layer of material at the atomic level using sequential reaction steps that are self limiting. ALE is thousand times faster as compared of approaches like Reactive ion etching (RIE) & others. ALE with thermal technique, the researchers fabricated 3-D transistors that are as narrow as 2.5 nanometers and more efficient than their commercial counterparts. Consider the etching approaches …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 1, 2019 · pp. 45–56 Read article
-
Thermodynamic Explanation on Surface-Driven Capillary Flow of Working Liquids in the Microfluidic Devices Fabricated by Polymers
Abstract: In this experimental work, total 100 individual microfluidic devices are fabricated by polymers using author’s own hands-on completely. A set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by SU-8 using the maskless lithography and indirect bonding technique. Another set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by PMMA using the maskless lithography, hot embossing …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 45–70 Read article
-
Developments of Glass-Ceramics in Modern Scenario
Abstract: This article is a study on glass science and methods to achieve esteem. Synthetic protocols has been implacable secure to obtain glass-ceramic properties. First glass-ceramic capability has been introduced by Stookey in 1950s’. His excellence has reticulated control on devitrification of glass by adding nucleating agent i.e. TiO2 in 1960s’. Extendable pursue has rated score depending on sinter philosophy on glass-ceramics as well former scripture that has been etiquette of …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 23–31 Read article
-
Runway Orientation Problems – A Case Study of Middle Euphrates International Airport MEIA
Abstract: It has been planned to design and construct a major international airport at the middle Euphrates region of Iraq to support the commercial development plan and serve the pilgrim’s occasional visit to the holly shrine at Holy Karbala and Najaf provinces. The airport site is 30 km west of Karbala at the edge of the great western desert. The design includes construction of two parallel runways of 4500 m length, …
Published in International Journal of Construction Engineering and Planning · Vol. 1, Issue 1, 2015 · pp. 21–28 Read article
-
A study on C, H and L type prismatic buildings for Synoptic wind flow.
Abstract: The atmospheric boundary layer can be defined as part of the troposphere at the lowest level which is influenced by the presence of the earth’s surface, and responds to surface forcing within a timescale of about an hour or less. The boundary layer depth might differ from hundreds of meters to a few kilometers. The wind that blows due to Atmospheric Boundary Layer is known as synoptic wind. Moreover, thunderstorms …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 6–14 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Evaluation of Green Rating System for Building
Abstract: Civil Industry is a rapidly growing industry in this is due to the country's huge economic, social, and infrastructural development. This development of the construction industry leads to a negative impact on the environment and harms human beings. Hence, to reduce this the concept of ‘Green Building Technology is put forward in recent years. Green Building Technology is a rating system adopted worldwide which provides unique guidelines to make construction …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 1, 2023 · pp. 39–45 Read article
-
Utilization of Steel Slag as Course Aggregate
Abstract: Concrete is the third largest material consumed by human being after food and water as per WHO. Concrete plays a vital role in the design and construction of the nation’s infrastructure. Almost three quarters of the volume of concrete is composed of aggregate. These are obtained from natural rocks and river beds, thus degradation them slowly. This issue of environment degradation, and need for aggregates demands for the usage of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 14–18 Read article
-
Spatial and Temporal Variation of Bioaerosols with Meteorology at Different Land Sites
Abstract: Air particulates associated with biological origins are termed as bioaerosols. These bioaerosols consist of different species of bacteria, fungi, pollen and spores, etc. and can be allergenic and infectious in nature. The study is an attempt to understand the seasonal variation in bioaerosols concentration at three different land use sites: site I (commercial site), site II (dumping site), Site III (vegetated site). Statistical correlation was applied to infer the relation …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 12–20 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article
-
Design of Leachate Treatment Plant for Adharwadi Dumping Waste
Abstract: Generation of municipal solid waste (MSW) is increasing due to urbanization, commercialization, and rising population. This result in leachate generation from MSW landfill and dump side. Leachate from dumpsite is the major environmental problem as it causes surface water pollution, ground water pollution and land pollution. Leachate is defined as a liquid that passes through a landfill and has extracted dissolved and suspended matter from it Raghab et al. 2013. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 2, 2020 · pp. 11–15 Read article
-
Design of Municipal Solid Waste Treatment Plant for a Dumping Ground
Abstract: Municipal Solid Waste (MSW) has become a heavy environmental drawback in major cities everywhere world. Solid waste management is one in every of the fundamental essential services provided by Municipal authorities within the country to stay urban centres clean. Municipal laws governing the urban native bodies don't have adequate provisions to deal efficiently with the ever-growing drawback of Solid Waste Management. With rapid urbanization, the situation is becoming critical as …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 2, 2020 · pp. 1–6 Read article
-
Evaluation of RC Frames in Shifting on Seismic Zone 3 to 5 and Retrofitting Techniques using ETABS
Abstract: The finite element analysis has been carried out on six storey reinforced concrete frames using commercial finite element software ETABS. The performance of six storeys infilled frame failing due to improper design as well as inadequate reinforcements when seismic zone shifting from zone 3 to 5 was studied. The behavior of infilled frame considered in zone 5 was studied and compared with the results obtained from the analysis of frame …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 2, 2017 · pp. 1–16 Read article
-
Seismic Performance of RC Building Using SMA Device
Abstract: In the present study, the seismic performance of RC frames with superelastic shape memory alloy damper (SMAD) is investigated. Shape memory alloys (SMA) belong to a class of smart materials capable of regaining its original shape when subjected to heat at a certain temperature. Hence, SMA is used as energy dissipater and re-centering components. A numerical investigation is carried out with nonlinear time history analysis of a five-storey RC frame …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Innovation Management-An Integrated Approach To Business Modelling
Abstract: The present study gives a detailed account of distinction between invention and innovation, and analyses how an invention can turn into innovation, and lead to development of a new innovative product for a business organization which can generate revenues, incomes and employment. While invention is about something new, innovation refers to the use of an idea for developing a new product, or service. Although invention generates new ideas, prototypes and …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 1, 2016 · pp. 22–35 Read article
-
Evaluation of Rutting Susceptibility of Bituminous Mixes Using Finite Element Modeling
Abstract: Pavement performance mainly depends on the quality of bituminous mixes. Poor bituminous mixes cause premature failures such as rutting or permanent deformation, cracking, bleeding etc. The design of bituminous mixes should contain certain criteria to prevent premature failures. The mixes designed based on these criteria are generally known as performance based mix design and are gaining popularity in the recent times. Among various types of pavement failures, permanent deformation or …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 1, 2016 · pp. 50–54 Read article
-
PROBING INTO PEOPLES INTENTION IN THE USAGE OF SHARED AUTONOMOUS VEHICLES
Abstract: Transport brings a downward effect on people especially when it is shared (Public Transport) and with the growing development and prospects as well as risks it has become important to investigate. Multiple indicators and multiple causes (MIMIC) model a special structure equation model (SEM) adopted in the simulation to study the intention of the possibility to replace the commercial transport system with a shared autonomous vehicle (SAV). An investigation is …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 1, 2019 · pp. 51–67 Read article
-
Climate Change-Implications for Agriculture and Food Security
Abstract: Abstract The warning signs of global warming have appeared everywhere, right from increased concentration of greenhouse gases in the atmosphere, to increasing temperatures, and occurrence of extreme events like droughts, floods, intense rains, and cyclones, besides melting of glaciers and rise in sea levels. The objectives of this paper are to present likely scenarios, risks to agriculture, food security and livelihoods arising out of climate change in coming few decades. …
Published in International Journal of Water Resources Engineering · Vol. 1, Issue 2, 2015 · pp. 4–32 Read article
-
Physico-Chemical Characteristics of Ground Water in Tirupur District
Abstract: Deterioration of ground water resources has been a major concern of human society. The aim is to preserve and to maintain the balanced biological communities and sustainable stream ecosystem health. The hydro chemical study is an important parameter for determining the water quality for the end-users. The study for the same has been carried on the ground water by collecting groundwater samples in Tirupur district. A total number of 25 …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 2, 2017 · pp. 36–42 Read article
-
Effect of Circular Polyimide Micropillars on Surface-Driven Capillary Flow of Dyed Working Liquids inside the SU-8 based Glass Microfluidic Devices
Abstract: In this experimental work, total 8 individual SU-8 based glass microfluidic devices are fabricated using Mukhopadhyay’s own hands-on completely. Maskless lithography and indirect bonding technique are the methods to fabricate these devices. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow in each device. Dyed water and dyed ethylene glycol are the selected and prepared …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article