Search
201 articles for “matrix”
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Study of Composite Material
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase.
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 43–53 Read article
-
Status of Composite Materials in Automobile Sector
Abstract: Composite materials may someday have big advantages over steel in automobile manufacturing. Composites are being considered to make lighter, safer and more fuel-efficient vehicles. A composite is composed of a high-performance fiber (such as carbon or glass) in a matrix material (epoxy polymer) that when combined provides enhanced properties compared with the individual materials by themselves. Carbon-fiber composites weigh about one-fifth as much as steel, but are as good or …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 27–30 Read article
-
The advanced composite materials production by new method using the process of vibro-turbulization
Abstract: Typically, the methods of composite materials production, such as epoxy bases, include preparing a binder by mixing a hardener, a solvent and an epoxy resin, infusing a fibrous or powder filler with a binder, and hardening by heating under pressure. These methods do not permit to reach the main goal of the production of advanced composite materials with a basis (matrix) filled by uniformly dvistributed fibrous or powder filler (armoured …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 1–4 Read article
-
Mechanical characterization of hybrid natural fibre composites developed through compression moulding process
Abstract: Increasing environmental concerns these days due to excessive consumption of fossil-fuel products have impacted our atmosphere, which has led several researchers to work in the field of polymer composites reinforced by natural fibres. In this research, the emphasis is on developing the completely biodegradable green composites using polylactic acid (PLA) as a matrix and reinforcement with jute and sisal fiber by compression molding method and effect of various parameters on …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 1, 2020 · pp. 29–35 Read article
-
A Review on Polybutadiene Rubber Composites
Abstract: Rubber composites are crucial materials that obtained by the combination of two or more components i.e. rubber and filler, comprising with different fundamental properties. The composites are lighter yet stronger materials in nature with intermediate characteristics of both the initial ingredients. Polybutadiene rubber (PBR) is one of the highly produced global synthetic rubber having significant industrial applications. PBR composites showed improved physical, mechanical and thermal properties, with greater strength, resistance …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 1–19 Read article
-
Compatibilizing Effect of Modified Polypropylene on the Properties of Polypropylene/Organically Modified Layered Silicate Nanocomposites
Abstract: In the present research paper, a series of polypropylene (PP) nanocomposites containing 3, 5, and 7 wt% of an organically modified layered silicate (OM) were prepared via direct melt mixing in the presence of maleic anhydride grafted polypropylene (indicated as PP-g-MA, PPMA), and hexamethylenediamine-modified maleic anhydride grafted polypropylene (marked as PP-g-HMDA, PPHMDA) as compatibilizing agent at concentration of 10 wt%. Subsequently the influences of the compatibilizer on the morphological, mechanical, …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 8–19 Read article
-
Experimental Study on Mechanical Properties of E-glass Fiber and Epoxy Resin Hybrid Composite Material
Abstract: Hybrid composites occupying the area of standard materials by satisfying the necessities of various sectors like part industries, automobile industries, ship building and numerous bio-medical sectors. the most reason to substitute standard materials is that the hybrid composites giving same or additional needed properties with less weight and value than standard materials and most output in minimal consumption with higher lifespan to seek out the economical suggests that of utilizing …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 20–36 Read article
-
A Model for Plastic-Hydrolytic Damage Bioresorbable Polymer Composites
Abstract: This paper explains and assesses a recently developed constitutive model for elastic-damage that may sustain plastic-hydrolytic damage. When a metallic material is subjected to plastic strain, voids and microcracks in the metal matrix start to form, develop, and merge. This is what causes ductilitydegradation in metals. Only a few of the many models that have been presented to depict ductile failure have done a thorough analysis of the entire damage …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 1, 2022 · pp. 23–27 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Comparative Experimental Measurement on the Fundamental Properties of Chemically Treated Natural Fibers
Abstract: Plant-derived natural fiber as a reinforcing component can play a prevalent role in the field of fiber reinforced polymer composite due to their obtainability, environmentally friendly, renewability, low- density, and low cost. Golden fiber (jute fiber)/coconut fiber can be a potential candidate to replace the synthetic fiber reinforced polymer composite. The influences of chemical treatments such as mercerization, sodium lauryl sulfate and a combination of mercerization and sodium lauryl sulfate …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 34–44 Read article
-
Review of Composites formed of Thermoplastic as Organic Fibers
Abstract: Composites made of structural monomers gave rise to thermoplastic polymers (TMCs). Due to their usage of a thermoplastic matrix, these materials really aren't chemically reactive. TMCs may be remoulded without degrading when heated and become softer. They harden into the final shape when they cool. Thermoplastic materials bonded with plant fibers may one day be used to create impact- absorbing structure for renewable power. Its impact features of organic fiber-reinforced …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 28–33 Read article
-
Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS
Abstract: This work investigates the parametric optimization of CNC turning operation for Nylon 6 with principal component analysis (PCA) and technique for order preference by similarity to ideal solution (TOPSIS) based on Taguchi approach. Taguchi’s L16 orthogonal array takes 16 experimental runs to execute the design matrix of turning parameters through PCA coupled with TOPSIS, utilizing relevant experimental data as obtained through experimentation. Turning speed (TS), feed rate (FD) and depth …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 1, 2018 · pp. 36–47 Read article
-
Multi-objective Optimization of Weld Bead Geometry of Micro-plasma Arc Welded Titanium (Ti–6Al–4V) Alloy Sheets Using TOPSIS
Abstract: Titanium alloys are used in the manufacturing of aero engine components for their attractive, combined properties such as lightness, good strength-to-density ratio, corrosion resistance. In the present paper, titanium (Ti–6Al–4V) alloy sheets are butt welded using micro-plasma arc welding. Peak current, base current, pulse rate, and pulse width are considered as weld input parameters and weld bead geometry parameters, namely front width, back width, front height, back height, are considered …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 37–48 Read article
-
Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint
Abstract: In the present work, two dissimilar AISI 304 and AISI 430 sheets of 0.4mm thick welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. 31 experiments are performed as per Central Composite Design (CCD) design matrix of Response Surface …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 1–26 Read article
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Application of Response Surface Method in Studying the Properties of Micro-plasma Arc Welded AISI 904L Super Austenitic Steel
Abstract: Super austenitic steels play a major role in fabrication of corrosion resistance components which are subjected to severe corrosion. In the present work, super austenitic steel AISI 904L of 0.4 mm thickness is butt welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 2, 2019 · pp. 1–17 Read article
-
Manufacturing of Composite Material Using Sugarcane Bagasse and Waste Plastic for Household Warm Protection
Abstract: On this cutting edge age the composite materials are gotten the essential material for any building creation since composite materials have a few explicit properties, for example, high solidarity to weight proportion, ease, and simplicity of manufacture, elasticity, compressive quality, Impact quality, high protection from warm which doesn't understand in unadulterated material or non-composite material. of its immense application, a Mechanical Engineer should realize how to create and testicle a …
Published in International Journal of Manufacturing and Materials Processing · Vol. 6, Issue 1, 2020 · pp. 40–43 Read article
-
Study of Liquid Rubber Printing on a 3D Printer by Using a Peristaltic Pump
Abstract: The additive manufacturing (AM) process known as direct-ink writing (DIW), also known as direct-print (DP) or direct-write (DW), has great practicality in a variety of material types. In this process, it is essential for the ink formulation utilized for the DIW process to be a paste-type ink with a time-dependent shear-thinning property. Rubber has been utilized in a variety of applications however, the high pressure and temperature needed to treat …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 34–44 Read article
-
Application of hybrid RSM-GA technique in predicting optimum process parameters of biodiesel production from Karanja and Mahua oils
Abstract: The current work is focused on the maximization of biodiesel production from Karanja and Mahua oils. The design expert 6.0.8 tool is used for applying the RSM and half fraction with five input process parameters are entered in it. The ranges of all the process parameters are obtained from the literature review. The experiment design matrix is produced to conduct the experiments in order to get maximum biodiesel yield. The …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 1, 2023 · pp. 7–11 Read article