Search
806 articles for “TEM”
-
Thermal Performance Evaluation of a Prototype Building Utilizing Composite Construction and LGS-Ferrocement Sandwich Wall Panels
Abstract: In India, there is a noticeable surge of interest in embracing progressive construction techniques, including modular precast construction, light gauge steel (cold-formed steel), and precast Ferrocement composite structures. These advanced methods offer a sustainable approach with a significantly reduced carbon footprint compared to traditional reinforced concrete (RCC) construction. Moreover, they present several advantages, such as expedited construction, minimized material transportation, cost-effective labor, and accelerated project completion. An ingenious technology has …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 11–20 Read article
-
Thermal Effects on Elastic and Rigidity Modulus of Flexible Pavement Wearing Course
Abstract: Laboratory investigation of flexible pavement was carried out using asphalt concrete samples to simulate the behaviour of actual field conditions of a flexible pavement. The study was carried out in order to ascertain the changes that will result in the elastic and rigidity (shear) modulus of flexible pavement when subjected to increasing temperature conditions (thermal effect). The study became pertinent because mechanistic design of flexible pavement requires as input the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 2, 2017 · pp. 1–7 Read article
-
Correlating the Fatigue Life of Asphalt Concrete with Permanent Deformation
Abstract: Modelling the deformation-fatigue life of asphalt concrete can furnish an easy access for prediction of the pavement behavior under various service circumstances. An attempt has been made in this investigation to correlate the fatigue life of asphalt concrete with the permanent deformation after considering the test variables such as binder content, testing temperature, practicing moisture damage, and practicing ageing. It can be observed that at high microstrain level of 750, …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 7, Issue 2, 2021 · pp. 22–32 Read article
-
Evaluation of ERA5 Global Model Performance in Regional Waters Based on Year-round Meteorological Observations: A Case Study in The Bay of Bengal
Abstract: Monitoring the meteorological parameters is crucial in understanding the day to day weather for planning various activities. Longterm monitoring is essential to estimate the climate change and associated impacts. One of the key adverse effects of climate change on mankind is the increasing number of cyclones of high intensity. Indian moored buoy network in the North Indian Ocean has been maintained by NIOT for the past 2.5 decades providing crucial …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 40–52 Read article
-
Modification of Solar Hot Water Heating System
Abstract: In optoelectronics system, the copper sulfide powder plays an important role as a thin film layer. This paper covers fabrication of Copper sulfide (CuS) Powder and its characterization. The fabricated Copper sulfide powder gives better result as compared to commonly used Copper sulfide (CuS) available in the market. In this experiment, the Copper sulfide powder (CuS) was coated on the tubes as a thin film and measured the outlet water …
Published in International Journal of Water Resources Engineering · Vol. 9, Issue 1, 2023 · pp. 33–39 Read article
-
Online Server Based Monitor and Control of Industrial System Using PID with Coding
Abstract: In this system having heater mechanism with thermocouple, thermocouple will sense the temperature and will give the data to delta controller (after analog to digital conversion). After that, digital controller passes the data to PLC controller through RS-485. PLC programming will result in when temperature is low, heater will start and buzzer blows when limit exceeds, as well as when temperature is low, the heater will start again and the …
Published in International Journal of Electrical Power System and Technology · Vol. 5, Issue 1, 2019 · pp. 24–32 Read article
-
Validation of Selected SPV Module
Abstract: This paper presents the mathematical modelling and its MATLAB simulation of selected photovoltaic module manufactured by BHEL (SL No.-E1200127, Type-L24170) in which parallel connected solar cell (Np=1) and Series connected solar cell(Ns=72) in order to estimate its behavior of SPV module and Finally compare the simulation results with the live field values measured with the help of Amprobe solar analyzer and Senser (S-4000). Using measured Irradiance(S) and module temperature (Avg. …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
Lie Detector for Loyalty Test Using Biomedical Device
Abstract: This paper describes the real time working of a Simulink based blood pressure and body temperature monitoring system based on ATMEGA 328 (Arduino uno). The major monitoring system in use give the output on a liquid crystal display, even if it is a digital circuit, it is prone to noise and distortions. So, we are using a new technique to make this health monitoring system more accurate. We are adding …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 8, Issue 1, 2022 · pp. 8–13 Read article
-
Inspection The Effect of Panel Height on The Efficiency of Solar System
Abstract: Increasing the operating temperatures cause some loss of efficiency in solar system, so, study the nature of transfer and dissipation of the solar panel heat and its impact on the amount of the panel's production of electrical power has become an important factor in determining the efficiency of the solar panel. To reduce the possibility of excessive heating of solar panel, especially its upper part, an air gap between the …
Published in International Journal of Telecommunications & Emerging Technologies · Vol. 6, Issue 2, 2020 · pp. 41–48 Read article
-
Impact of Annealing on Structural and Surface Properties of Nanostructured ZnO Thin Films
Abstract: ZnO thin movies with various grain size were developed on undefined quartz substrate utilizing turn covering technique. We have announced the impact of toughening temperatures on the basic and surface properties of ZnO thin movies. The surface properties were described by AFM. From XRD investigation, it can be seen that the FWHM diminishes with an expansion in strengthening temperature from 500 to 575ºC which is reflected in the expansion in …
Published in International Journal of Applied Nanotechnology · Vol. 3, Issue 1, 2017 · pp. 33–37 Read article
-
Hydrogen Peroxide Decomposition to Water: A Review Process
Abstract: The term "thermal" refers to the presence of heat. Breaking down is the action of decomposing. If a materials temperature is raised, it goes through a chemical process called thermal breakdown. At high temperatures, thermal breakdown processes occur. Before breaking into the products, the reactants absorb a lot of energy. The reactant is the beginning chemical. It decomposes to simpler entities, that might be either elements or compounds. Hydrogen peroxide …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 17–20 Read article
-
The Effect of Carbon Percentage on Structural Steel’s Compressive and Tensile Strength: A Literature Survey
Abstract: The fundamental necessity of this survey is to check the enhancement of the strength, hardness, dimensional stability and wear resistance by passing them through the cold temperature that enhance the hardness of the substance as a result of the increment in which it took place within the proportion of primary solid solution within the structure. If the type of methods mentioned in the article are employed in manufacturing and production …
Published in International Journal of Metallurgy and Alloys · Vol. 1, Issue 2, 2015 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article
-
Performance Enhancement and Improvement of Energy Efficiency in Evacuated Tube Heat Pipe Collector with Nanocomposite: A Review
Abstract: Solar collector tube is used to combine incident energy and convert it into heat energy. Recently several studies have been done on improving the performance of the solar collector. Solar energy is clean energy and does not create pollution. The sun gives more power than we need. Solar collector consists of an absorber unit which transfers the heat energy of the sun to a working fluid. It is easily seen …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 27–31 Read article
-
Studying the Effects of Extracts that Prevent Corrosion on Sheet Metal in an Acidic Condition
Abstract: The prevention of corrosion in steel materials in acidic conditions is summarized in this paper. There are many accelerated corrosion preventives for acidic solutions available. High temperatures, lowgrade steels, and HCl solutions are the main focus points. The creation of corrosion inhibitor compositions which combine corrosion inhibitors with surfactants, solvents, and expressions to increase the potency of single compounds at extreme temperatures is another focus of this analysis. This review’s …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 22–26 Read article
-
The Existence of Two States in Liquid Water and Its Impact on Biological and Nanoscopic Systems Around Us
Abstract: This work reviews several properties of liquid water, including the dielectric constant and the proton-spin lattice relaxation, and draws attention to a bilinear behavior defining a crossover in the temperature range 50 ± 10°C between two possible states in liquid water. The existence of these two states in liquid water plays an important role in nano-metric and biological systems. For example, the optical properties of metallic (gold and silver) nanoparticles …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 1, 2017 · pp. 16–21 Read article
-
EFFECT OF HEAT AGEING ON MECHANICAL PROPERTIES OF POLYAMIDE 6(NYLON 6) & POLYAMIDE 12(NYLON 12)
Abstract: Polyamide 6 or Nylon 6(PA 6) and polyamide 12 or Nylon 12 (PA 12) are well known engineering semi-crystalline polar polymers characterized by the presence of amide linkage (-CONH-) in the repeating units of their chains. The glass transition temperature (Tg) of PA 6 and PA 12 is ~50 °C and ~37 °C respectively. PA 6 is widely used for gears and bearings, fittings in automobile industry for under hood …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 2, 2016 · pp. 1–12 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article
-
Fabrication of a Novel and Efficient Radiation Grafted Functionalized Polymer Adsorbent and Investigation of its Applicability in the Adsorptive Removal of Cr (VI) Ion from Aqueous Solution
Abstract: The grafting of glycidyl methacrylate (GMA) onto non-woven polyethylene (PE) fabric was accomplished using a radiation-initiated grafting technique. The grafted textiles were allowed to react using triethylamine to create functioning amine groups. Upon bond formation yield, the impact of grafting intensity has been examined. Utilizing the appropriate technologies, such as FTIR, TGA, and SEM, the adsorbents were rigorously examined. There was evidence of GMA grafting and diamines according to FTIR, …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 1–15 Read article
-
Evaluation of Adsorption Isotherm Parameters on Corrosion Rate of Metal using Water-Based Extracts as an Inhibitor in Acidic Medium
Abstract: The research showcases the evaluation of MCS metal corrosion rate in terms of the effect of temperature and adsorption isotherm parameters monitored using water-based extracts with the aim to predict the Gibb’s free energy characteristics on inhibition integrity of the metal sample in acidic medium of 1.0M of HCl The water-based extract used are Selaginella myosurus, SM and Pneumatopter is pennigera, GF and the inhibition performance with respect to temperature …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 14–25 Read article