Search
1334 articles for “Rats”
-
Planning and Management of Water for Green Building
Abstract: Green buildings are designed, constructed and operated to improve the betterment of their occupants and support a healthy community and natural environment, as compare to a conventional building. Green rating has been started in many countries for the building. In India, three agencies have their own rating system. Water conservation, Water quality and conservation, Water conservation measures are among one from thevarious criteria for rating of buildings. Though India has …
Published in International Journal of Landscape Planning and Architecture · Vol. 9, Issue 2, 2023 · pp. 12–15 Read article
-
Mechanical properties of Poly vinyl alcohol and Nitrocellulose blends.
Abstract: Mechanical properties of polyvinyl alcohol and nitrocellulose blends has been determined successfully via tensile strength, Young’s modulus, percentage elongation and impact strength. The blends of the respective polymers are in the ratio PVA:NC (90:10,80:20,60:40,50:0,40:60,10:90). There are good results from different blend ratios which include tensile strength PVA: NC 90:10 (16.98MPa) Young’s modulus 60:40 (0.71MPa). The highest percentage elongation was observed for 80:20 at 160.09%. The most elastic blend ration was …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 1, 2020 · pp. 54–59 Read article
-
PREDICTIVE MODEL FOR CORROSION CONTROL IN CRUDE OIL AND GAS PRODUCTION FACILITIES
Abstract: Corrosion is a major problem in the global oil and gas industry, as crude oil and gas production operations are shut down on daily basis, because of facility failure, due to the deterioration and the loss of a facility and its critical properties due to chemical, electrochemical and other reactions of the exposed facility surface with the surrounding environment. Efforts have been made to eliminate corrosion in crude oil and …
Published in International Journal of Analytical and Applied Chemistry · Vol. 6, Issue 2, 2020 · pp. 23–36 Read article
-
Numerical Analysis of Flow Characterization in a Continuous Crystallizer
Abstract: In this work, hydrodynamics in a draft tube continuous crystallizer is analyzed computationally through Ansys CFD to crystallization phenomena. Hindrance to fluid mixing and particle suspension due to vortexing can be overcome by providing baffles. A draft tube ensures that it directs the flow in vertical direction ensuring good axial blending. Here CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow …
Published in International Journal of Chemical Separation Technology · Vol. 2, Issue 2, 2016 · pp. 33–43 Read article
-
Temporal Monitoring of Drinking Water’s Quality for Adjustment of the Production Station: Case of Gagnoa Drinking Water Treatment Station, Ivory Coast
Abstract: The frequent refusal of local populations to consume tap water, despite the financial resources deployed by the State, constitutes a headache for managers who have to choose between customer satisfaction and the search for profits. The quality (chemical and organoleptic) of the water offered by the managers of drinking water networks is one of the causes of this refusal. The objective of this study is to use the Jar Test …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 2, 2023 · pp. 20–28 Read article
-
Magneto-electrodeposition of Sn–Ni alloy Coating for Better Corrosion Protection
Abstract: The present paper reports the development of excellent corrosion resistant Sn–Ni alloy coatings from a new pyrophosphate bath by magneto-electrodeposition (MED) approach. First part reports optimization of conditions for deposition of Sn–Ni coatings on mild steel by conventional electrodeposition (ED) method and their characterization. The second part demonstrates how the corrosion resistance of Sn–Ni alloy coatings can be improved drastically by MED method, using same bath. Significant decrease of corrosion …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 1, 2016 · pp. 29–42 Read article
-
Chemical Engineering Analysis of Polymer Composite Creation Using Sawdust, Sharp
Abstract: Polyethylene terephthalate (PET) is known for its general adoption for its lightweight and flexibility and durability nature. It is non-biodegradable and contributes majorly to water and land pollution. The amount of plastic-generated waste is increasing extensively following its usefulness there and the inability of users to properly dump or recycle it has resulted in a big threat to the environment. In this research work an attempt has been made to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 17–29 Read article
-
Suitability of Methyldiethanolamine (MDEA) and Piperazine (PZ) for Improving CO2 Absorption Efficiency Using Rotating Packed Bed (RPB) Technology: A Modeling and Simulation Study
Abstract: Carbon dioxide (CO2) capture and storage (CCS) is an essential technology for reducing atmospheric CO2 emissions and mitigating climate change, especially in fossil-fuel power generation. However, the high cost of CCS technologies has hindered their widespread adoption. In this study, we modeled CO2 removal using a rotating packed bed (RPB) technology using Visual Fortran and Aspen Plus software. We made use of a blended amine solution including different molar concentration …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 9–15 Read article
-
Spectrophtometric Study of Catalysed Oxidation of Some Cyclic Alcohols by N-bromophthalimide
Abstract: The spectrophotometric kinetic investigation of cyclohexanol and cycloheptanol catalysed by Keggin type anion [PW12O40]3- with N-bromophthalimide have been carried out in 30% acetic acid medium in absence of mercuric(II) acetate and in presence of sulphuric acid. The observed kinetic data was used for the justification of Beer-Lambert law. The reactions follow a fractional-order with respect to cyclic alcohols, PTA catalyst and first-order with respect to oxidant NBP. The added H+ …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 5, Issue 1, 2019 · pp. 44–50 Read article
-
Design and Fabrication of Pedal Operated Air Compressor
Abstract: The first idea for powering the pump would be a stationary bicycle. Pedal power is simple, efficient, and practical. Its most familiar use is the bicycle for personal or cargo transportation. But pedals can also power small stationary machines. Since the system is to remain human powered and large amounts of power are required, having the operator use their stronger leg muscles was intuitive. A stationary pedal driven device seemed …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 6, Issue 1, 2020 · pp. 21–29 Read article
-
Effect of Compression Pressure on the Strength and Fuel Properties of Maize Cob Briquettes
Abstract: Biomass can be densified under a high compression pressure or a low compression pressure. The type of raw material, moisture level, particle size, and form typically all influence how much pressure should be used. This study utilized maize cobs and waste paper pulp to produce briquettes which are seen as alternative fuels. The goal was to determine how compression pressure affected the strength and fuel characteristics of the briquettes that …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 1, 2022 · pp. 16–24 Read article
-
Compressive Strength and Chloride penetration on Semi-Lightweight Concrete Made Up of Artificial Aggregates
Abstract: This paper deals with the properties of semi-Light weight concrete prepared by using Light weight wood ash pellets as coarse aggregates. It can be prepared by varying the cement content from 300 to 450 kg/m3. Optimum design mix can be finalised by studying the engineering properties such as compressive strength, split tensile strength, young’s modulus and rapid chloride penetration test. Various trial mixes have been attempted in the laboratory by …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 14–25 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
THE STRENGHT PARAMETERS OF SAW-DUST ASH ON THE GEOTECHNICAL PROPERTIES OF LATERITIC SOIL FOR ROAD CONSTRUCTION PURPOSES IN GHANA
Abstract: The strength parameters of saw dust ash on the geotechnical properties of lateritic soil for road construction purposes in Ghana have been investigated. The lateritic soil sample collected was subjected to the following test; Atterberg limits, compaction and California Bearing Ratio Test. The tests were conducted in accordance with BS: 1377 and AASHTO M145 standards. A varying percentage of the saw dust ash in order of 2%, 4%, 6%, 8% …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Soil Reinforcement Using Waste Plastic Materials
Abstract: Soil reinforcement is a ground improvement techniques used in different civil engineering structures like earth retaining structures, embankment, foundations, road construction, etc.In this study, an attempt was made to collect the soil samples in such a way that it has different plasticity index. Accordingly, samples from surrounding areas of the Kanpur were collected and analyzed for their plasticity index. It was observed that three locations such as PSIT Campus, Naramau …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 10–20 Read article
-
Study on Analysis and Design in Reinforcement Structure Joints of Water Tank Structure for Safety Human life
Abstract: A water tank is used to store water to surge over the daily requirement. In the construction of concrete structure for the storage of water and other liquids the imperviousness of concrete is most essential. The permeability of any uniform and thoroughly compacted concrete of given mix proportions is mainly dependent on water cement ratio. The increase in water cement ratio results in increase in the permeability. The decrease in …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 16–28 Read article
-
Experimental Study on Scour Around T-Head Groynes in Open Channel
Abstract: Groynes are the river training structures which are used extensively in anti-erosion activities. An experimental investigation of scouring around the groynes in an open channel is presented in this paper and an attempt to analyze the behavior of T-shaped groynes in terms of its applicability in alluvial channels was made. Tests were conducted by varying the symmetry of flange in three different manners (symmetric, larger flange in upstream and downstream …
Published in International Journal of Water Resources Engineering · Vol. 4, Issue 1, 2018 · pp. 33–39 Read article
-
Evaluation of Hydraulic Performance: A Case Study of Etana Small Scale Irrigation Scheme: Wolaita Zone, Ethiopia
Abstract: The conventional furrow irrigation system is inherently inefficient in wolaita zone, while the suboptimal management and operation (inflow discharge and cutoff time) are considered as one of the main reasons for satisfactory hydraulic performance. Addressing these issues, the furrow irrigation system which is only practiced in the study area was evaluated on three fields under routine farmer management in wolaita zone. The study consisted of field experiments and simulation modeling. …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 2, 2020 · pp. 1–10 Read article
-
PERFORMANCE EVALUATION COMPARISON OF LMS AND NLMS ALGORITHM FOR AEC IN SPEECH PROCESSING
Abstract: ABSTRACTAn acoustic echo cancellation is a technique used to decrease the acoustic noise in corrupted speech signal. Adaptive filter is using to cancel the acoustic echoes. For better conversation in telecommunication application to achieve the control of acoustic echoes is important and for the proposed acoustic canceller echo algorithm is used to reduce unwanted noise. There is a requirement for more than thousands taps in acoustic echo path so this …
Published in International Journal of Digital Communication and Analog Signals · Vol. 5, Issue 2, 2019 · pp. 9–19 Read article
-
Building Movie Recommendation System using Clustering, Collaborative Filtering, Matrix Factorization and improving the accuracy of the system by incorporating Opinion Mining
Abstract: Recommendation systems is a part of information filtering system which are gaining tremendous popularity and are one of the most used systems these days because of their ability to make suitable predictions depending upon the user’s requirements. A recommendation system is a system that predicts the rating, preference or reviews that a user would give to a particular item. They are used in a variety of fields including movies, music, …
Published in International Journal of Digital Communication and Analog Signals · Vol. 6, Issue 2, 2020 · pp. 1–5 Read article