Search
650 articles for “Temperature”
-
PV PANEL EFFICIENCY IMPROVEMENT USING A HYBRID PV-TEG ASSEMBLY SYSTEM
Abstract: Peltier cells are used as a system to generate electricity through thermoelectric conversion using heat removed from the rear side of PV panels. This system also helps in improving PV panel performance by reducing the temperature of the panel. The combination of thermoelectric generation and improved PV panel efficiency represents an interesting solution to increase power generation in PV systems. The proposed prototype describes the characterization of a hybrid system …
Published in International Journal of Embedded Systems and Emerging Technologies · Vol. 7, Issue 2, 2021 · pp. 12–26 Read article
-
Validation of Selected SPV Module
Abstract: This paper presents the mathematical modelling and its MATLAB simulation of selected photovoltaic module manufactured by BHEL (SL No.-E1200127, Type-L24170) in which parallel connected solar cell (Np=1) and Series connected solar cell(Ns=72) in order to estimate its behavior of SPV module and Finally compare the simulation results with the live field values measured with the help of Amprobe solar analyzer and Senser (S-4000). Using measured Irradiance(S) and module temperature (Avg. …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 1, 2018 · pp. 8–16 Read article
-
Intelligent Monitoring and Water Irrigation System with IoT
Abstract: In this research paper, we present a Smart Irrigation System using an ESP32 microcontroller, with various sensors and Arduino IDE using IoT. Sensors like the DTH11 sensor temperature-humidity and Soil Moisture sensor use the smart Irrigation system to measure the soil’s reading and sends the alert to the Wi-Fi-based cloud application [Blynk Application] followed by watering the plants. The idea behind this is easy, cost-efficient, and simple to implement which …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 8, Issue 2, 2022 · pp. 20–28 Read article
-
Two-dimensional MoS2 Nanosheets: Preparation and Characterization
Abstract: The amazing properties and useful applications of graphene in the field of sensors, electronics and material science opens a new challenges to other two dimensional semiconductor materials. Specially due to extraordinary electronic, mechanical and optical properties, molybdenum disulfide (MoS2) is attracting huge interest in several applications. Single layer MoS2 with direct band gap shows better semiconductor behavior such as photoluminescence, makes them more acceptable in optoelectronic applications in comparison with …
Published in International Journal of Applied Nanotechnology · Vol. 5, Issue 2, 2019 · pp. 17–25 Read article
-
Ferromagnetism in Rare Earth Metal Doped ZnO: A Theoretical Approach
Abstract: The ferromagnetic properties of Diluted Magnetic semiconductor, Zn1−xDyxO is studied from theoretical point of view. The Heisenberg’s and Greens theorem determine the Hamiltonian of the system. The interaction between the nearest neighboring spin is determined by retarded Greens function. By using Greens theory, defect-induced ferromagnetism is discussed. For the ferromagnetic states, the expected exchange integral is positive and negative for the antiferromagnetic states. In addition, from magnetic property, the temperature …
Published in International Journal of Applied Nanotechnology · Vol. 8, Issue 1, 2022 · pp. 1–11 Read article
-
Use of Ausforming in Improving Reduced Activation 5%Cr Steels
Abstract: Improvement of reduced activation 5% Cr steels for improved performance of the parts during a thermonuclear reactor, (associated in Nursing enlarged application temperature) for structural materials like 5%Cr steels is crucial. The development of this generation of 5% Cr steels (i.e. EUROFER) is one among the aims of this EURO fusion programme for advanced steels. The goal of this work is to find out the foremost effective thermo-mechanical treatment of …
Published in International Journal of Energetic Materials · Vol. 1, Issue 2, 2015 · pp. 5–6 Read article
-
Characterization and Wear Behavior of TiN, TiAlN, TiCrN and AlCrN PVD Coatings Deposited onto AISI H13 Hot Forging Die Steel
Abstract: Four Nitride coatings TiN, TiAlN, TiCrN and AlCrN were deposited onto AISI H13 hot work die steel by cathodic arc evaporation physical vapour deposition (PVD) technique. The coatings were characterized by SEM, SEM-EDS, XRD, line scan EDS and X-Ray mapping tests and micro hardness tester. The wear characteristics were investigated using a pin on disc method at high temperature and speed against En-31 bearing steel disc. It was observed that …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Study of Microstructure and corrosion effects of precipitation hardened high strength AA-7xxx aluminium alloy subjected to cryo rolling
Abstract: The strength and life of an alloy is the primary parameter taken into consideration while building hulls and superstructures for marine applications. Usually AA-7xxx is widely used for these applications and hence is chosen for the present investigation. Cast AA-7xxx alloy reveals distribution of soluble intermetallic compounds in the α-aluminium matrix. In order to improve the mechanical properties and condition the microstructural features, precipitation hardening (solutionizing and ageing) treatment was …
Published in International Journal of Metallurgy and Alloys · Vol. 6, Issue 2, 2020 · pp. 18–23 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Study the properties of spin-coated Co-doped ZnO (CZO) thin Film
Abstract: Co doped ZnO (COZ) nanoparticles were prepared by spray pyrolysis technique followed by annealing at three different temperatures. XRD, UV- Vis spectroscopy, Photoluminescence (PL) studies, Scanning electron microscopy (SE), and vibrating sample magnetometry (VSM) studies were made to analyze the structural, optical and magnetic properties. XRD pattern confirmed the improved crystallinity after annealing and the formation of hematite phase. A UV-visible spectrum indicates that the nanoparticles exhibit the blue shifting …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 26–35 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
Market Assessment of Polymer Matrix Composites
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase. Polymer-matrix composites are valued in the aerospace industry for their stiffness, lightness, and heat resistance. They are fabricated materials in which carbon or hydrocarbon fibres (and sometimes metallic strands, …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 16–22 Read article
-
Thermogravimetic Study Of Chrysodine Dye Type Bridge Containing Bis (8-quinolinol)s Ligands and Their Coordination Polymers
Abstract: Our thermogravimetric analysis state that the degradation in chrysodine dye type bridge containing bis (8-quinolinol)s metal coordination polymers was initiated at almost the same temperature near about 25-500 C(T0). The remarkable difference is observed in the mode of thermal degradation of the parent ligand and its coordination polymer. The unchelated bis(8-quinolinol) ligand and coordination polymers begin to decompose almost at the same temperature but in the polymer chelates this decomposition …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 32–40 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
MISCIBILITY EVALUATION OF POLYSTYRENE AND POLY(METHYL METHACRYLATE) BLENDS: ANALYSIS OF MECHANICAL, THERMAL, MORPHOLOGY, AND VISCOELASTIC PROPERTIES
Abstract: Partially miscible blend of polystyrene (PS) and poly(methyl methacrylate) (PMMA) was successfully prepared employing melt blending technique. In order to impart miscibility, the processing was carried out at temperature above upper critical solution temperature (UCST) as studied from cloud point measurements. The complex modulii and viscosity derived from melt rheology analysis as a function of angular frequency were also used to study the effect of PMMA loading on the miscibility …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Similar Analysis of Blend of Virgin PVC and NBR with Recycled PVC and NBR
Abstract: Studies about led on mixing of polymers like acrylonitrile butadiene elastic (NBR) and polyvinylchloride (PVC) to deliver new polymeric materials with particular properties which can be utilized for some exceptional applications. This mix has been formulated for items working in contact with castor oils. Mixes at various temperature show that an ideal temperature exists for its arrangement. Incorporating PVC in various compositions has enhanced their physico-mechanical and chemical properties of …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 Read article
-
Modification of Poly Vinyl alcohol by Grafting and Appropriate Blending for Higher Stability and Biomedical field Application
Abstract: PVA is a one of the most important vinyl polymer which is widely used in industrial applications. PVA polymer has excellent adhesive property, solubility in water and it is biodegradable. But when it is modified by appropriate crosslinking or grafting or blending techniques then its physical as well as stability is altered. When polymer is modified by blending with other materials then its degradability decreases but thermal stability increases. In …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 27–33 Read article