Search
1173 articles for “investments”
-
THERMODYNAMICS OF HEAVY METALS (Hg2+, Cd2+, Fe2+AND Ni2+) ADSORPTION USING BOILER FLY ASH
Abstract: The effect of temperature on the adsorption of heavy metals, Hg2+, Cd2+, Fe2+ and Ni2+ using unactivated boiler fly ash (an agricultural waste) was investigated. The results showed that Hg2+ and Cd2+ ions were mostly affected by increase in temperature because their sorption rate decreased at high temperature. At the temperature of 273 K and 383 K, the amount of Hg2+ adsorbed (mg/g) by the unactivated boiler fly ash was …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 25–34 Read article
-
Effect of Temperature on Particle Size Mixed Ratio on Petroleum Hydrocarbon Treatment in Packed Bed Unit using Adsorbent
Abstract: The significance of temperature on the potential characteristics of the adsorbent performance in treatment of polluted water medium was monitored by using both room and sun dried bioadsorbent. The research furthermore showcases the effect of particle size of the bioadsorbent in the treatment process and obtained result revealed that the particle size is a contributing factor to the efficiency and the potential in which the rate of Total Petroleum Hydrocarbon …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Performance of Temperature on Compressive and Shear Strength of High Strength Fiber Reinforced Concrete
Abstract: ABSTRACT This paper presents the results of the experimental investigation of various strengths at elevated temperature of high strength fiber reinforced concrete (HSFRC). Variables considered in the research work are various strengths, temperature and fiber volume fractions. Various strengths considered for investigation are compressive strength, shear strength. Concrete mix of M60 grade and crimped steel fibers with aspect ratio 50 are used. The fiber volume fraction is varied from 1 …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 13–23 Read article
-
Compressive Strength, Water Absorption and Temperature Effects on Partial Replacing Cement with GGBS, Micro Silica and Fly Ash
Abstract: Widespread research work for decades also in development throughout the globe in concrete technology in finding substitute materials which can incompletely change Pozzolonic Portland Cement (PPC) and which can also meet the necessities of the strength and durability performance of industrial by products like micro silica, ground granulated blast furnace slag, fly ash, etc. now termed as complimentary cementations materials (CCM) are quite promising. The increased quest for sustainable and …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 30–37 Read article
-
Application of Grouted Mechanical Couplers in Accelerated Bridge Construction
Abstract: This paper presents two research projects that investigated the performance of the grouted coupler connection details developed for accelerated bridge construction applications. The goal of the first project was to conduct laboratory test and evaluation of the grouted rebar coupler connections similar to those utilized on the Keg Creek Bridge on US Highway 6, the first replacement bridge in Iowa constructed entirely with modular and accelerated bridge construction technologies. The …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 1, 2022 · pp. 32–48 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Fresh and Hardened Properties of High Performance Concrete with Weld Slag as Fine Aggregate
Abstract: This research centers on the incorporation of welding slag, the residue remaining after the welding process, as fine aggregates in the production of high-performance concrete with a compressive strength of 70 MPa. The chemical and physical characteristics of welding slag aggregates (WSA), such as chemical compositions, specific gravity, SEM images, XRD, and EDS analysis, were investigated. Additional investigations were carried out by substituting welding slag with standard sand at varying …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 29–36 Read article
-
Modulus of Elasticity of Steel Fiber Reinforced Concrete with Metakaolin
Abstract: In this paper the attempt has been made to study the results of an experimental investigation using steel fiber (SF) and metakaolin (MK) on the properties of structural concrete. Crimped steel fibers of aspect ratio 85 and MK were used in this investigation. The effects of these fiber and MK on workability, density, and on various strengths of M60 grade concrete are studied. Fiber content varies from 2.5% to 10% …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 50–59 Read article
-
Regration Analysis of Compressive Strength of Recycled Aggregate Concrete with Ground Granulated Blast-Furnace Slag and Fly Ash
Abstract: In this research work presents the compressive strength of recycled aggregate concrete (RAC) with recycled coarse aggregate (RCA) that coming from single source and the results of an investigation on the influence of recycled coarse aggregate (RCA) on compressive strength of recycled concrete are accessible. Natural aggregates concrete cubes were cured in normal water for 28-days obtain virgin and RCA. The properties of natural coarse aggregate (NCA) and (RCA) and …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 9–16 Read article
-
Analytical study of CFST Columns at different Temperatures under Monotonic loading using Abaqus Software (CC & LWC infill)
Abstract: This paper presents, Behaviour of Conventional & Lightweight Concrete-Filled Steel Tube under monotonic loading at different temperatures is investigated using finite element method (Abaqus version 6.13.0.). The parameters chosen for the study are the geometry of the specimen – circular section, different L/D ratios, different grades of conventional & lightweight concrete infill and different temperatures (30°C, 60°C, 90°C, and 120°C). The study includes an analytical investigation into a total of …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 43–52 Read article
-
Strength of Soil below RC Frame Subjected to Seismic Forces
Abstract: Present study focusses on the dynamic behavior of Soil below reinforced concrete frames considering soil structure interaction by performing linear static and dynamic analysis. A reinforced concrete frame having G+10 storey was considered. The investigation on the behavior of RC frame is carried out by using dynamic analysis i.e., Response Spectrum method. The modeling of RC frame is carried out by using finite element-based computer program i.e., STAAD.Pro. The investigation …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 2, 2021 · pp. 35–42 Read article
-
Watershed Management of Karha Basin by Using Geohydrological, Geomorphological and Geophysical Data
Abstract: The present work deals with the existing water structures available in the upper and lower Karha river basin of Purandar taluka, Pune District. Analysis of the existing structures, understanding the actual condition in upper and lower Karha river basin is carried out and the detailed investigations are countered. Geophysical investigation is carried out by Wenner method. Use of geophysical data has given the actual geology in the sub-surficial region of …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 1, 2022 · pp. 43–54 Read article
-
Behaviour of Micropiles Groups Subjected to Vertical Loads
Abstract: Micropiles are used to reinforce soils and to support foundations. It may be installed in several directions through existing foundations so as to increase the bearing capacity of the soil and to reduce the settlement. The group effects of micropile groups subjected to vertical loads in granular soils have been investigated by many research workers. However the findings have been found to be inconsistent indicating contradictory group effects. Group behaviour …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 8, Issue 2, 2022 · pp. 1–13 Read article
-
Structural Behavior of Railway Bridges Against Wheel Loading by Finite Element Analysis
Abstract: Three dimensional numerical investigations carried out on railway bridges using ABAQUS/Explicit finite element program. The length of bridge 30 m and single track was considered in the present study. The bridge members such as main girder, cross girders and truss members are designed according to Indian Railway Standard (IRS) and the geometry of the rail was also modeled according to the standard. The constitutive and fracture behavior of materials have …
Published in International Journal of Structural Engineering and Analysis · Vol. 3, Issue 1, 2017 · pp. 1–14 Read article
-
Seismic Performance of RC Building Using SMA Device
Abstract: In the present study, the seismic performance of RC frames with superelastic shape memory alloy damper (SMAD) is investigated. Shape memory alloys (SMA) belong to a class of smart materials capable of regaining its original shape when subjected to heat at a certain temperature. Hence, SMA is used as energy dissipater and re-centering components. A numerical investigation is carried out with nonlinear time history analysis of a five-storey RC frame …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 1–7 Read article
-
Reviewing on the Performance of Masonry, Reinforced Concrete and Underground Tunnels against Blast Loading
Abstract: An explosion on the elevated structures caused by terrorist activities or manmade events can induce significant deformations in the Civil Engineering structures. Therefore, it is necessary to review the response of the structural systems such as masonry structures, reinforced concrete building structures and reinforced concrete tunnel. In order to understand the scope for protecting such a structures and the structural behaviour under blast loading, a detailed literature review is conducted. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 31–42 Read article
-
ANALYZING THE EFFECTIVENESS OF LEAD RUBBER BEARING BASE ISOLATION IN VERTICALLY IRREGULAR MULTISTORY BUILDING
Abstract: In regions characterized by high seismicity, the structural integrity of multistorey buildings isparamount. This study delves into the effectiveness of lead rubber bearing (LRB) base isolation as a promisingstrategy to enhance the seismic resilience of vertically irregular multistorey building. The investigationscrutinizes a G+13 vertically irregular multistorey building situated in Zones 3, Zone 4, and Zone 5,employing meticulous numerical simulations to evaluate parameters including storey displacement, storeyshear, storey drift, and overturning …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 2, 2023 · pp. 1–18 Read article
-
Comparative Modeling of Pavement Surface Texture Variables Using ANN and SPSS Software
Abstract: The health of Roadway pavement surface is considered as one of the major issues for safe driving. Pavement surface condition is usually referred to micro and macro textures which enhances the friction between the pavement surface and vehicular tires, while it provides a proper drainage for heavy rainfall water. Measurement of the surface texture is not yet standardized, and many different techniques are implemented by various road agencies around the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 2, 2016 · pp. 30–40 Read article
-
Impact of Development of Rural Road Infrastructure in India: A Review
Abstract: As per analysis, rural areas account for 70 percent of India's total population. Hence, improved connectivity and easy accessibility to rural areas will provide a vital motivation to the country's economic growth. Development of rural infrastructure and rural transport infrastructure is very crucial in India. Rural road connectivity ensures access to critical services and opportunities, and fosters sustainable poverty reduction programs as well as employment generation through industrialization in rural …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 3, Issue 2, 2017 · pp. 33–37 Read article
-
PROBING INTO PEOPLES INTENTION IN THE USAGE OF SHARED AUTONOMOUS VEHICLES
Abstract: Transport brings a downward effect on people especially when it is shared (Public Transport) and with the growing development and prospects as well as risks it has become important to investigate. Multiple indicators and multiple causes (MIMIC) model a special structure equation model (SEM) adopted in the simulation to study the intention of the possibility to replace the commercial transport system with a shared autonomous vehicle (SAV). An investigation is …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 5, Issue 1, 2019 · pp. 51–67 Read article