Search
329 articles for “Concrete”
-
Potential of Natural Fibres for Strengthening Existing Structures – A Review
Abstract: To rehabilitate the deficiencies in the existing structures, synthetic/artificial fiber reinforced polymer composites have been considered as an effective external strengthening material for construction industries since a long period, due to their outstanding performances like high strength-to-weight ratio, lightness, and resistance to corrosion. But few of their drawbacks in terms of high cost, environmental issues etc., they have been triggered the introduction and development of natural fibers. Natural fibres are …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 2, 2018 · pp. 38–46 Read article
-
Experimental Investigation on Axially Loaded AASC and TVC Square Columns
Abstract: In this present project, an experimental investigation was carried out to study the behaviour of alkali-activated slag concrete (AASC) and traditionally vibrated concrete (TVC) columns under axial loading. The dimensions of the columns were 150 mm × 150 mm × 1219 mm to mimic the short column behaviour. The longitudinal steel ratio was varied for the specimens. Different criteria such as load deformation behaviour, compression stiffness and surface strain were …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 8–17 Read article
-
Behavior of RC Frame considering Soil Structure Interaction Under Seismic Load
Abstract: Present study focus on the behavior of reinforced concrete frames considering soil structure interaction by performing linear static and dynamic analysis. A reinforced concrete frame having G+10 storey was considered. The investigation on the behavior of RC frame is carried out by using dynamic analysis i.e., Response Spectrum method. The modeling of RC frame is carried out by using finite element-based computer program i.e., STAAD.Pro. The investigation is carryout by …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 2, 2021 · pp. 1–9 Read article
-
BY USING ETABS ANALYSIS OF LATERAL RESISTANCE SYSTEM TO REDUCING THE DISPLACEMENT IN MULTISTOREY BUILDING
Abstract: It is usually a good idea to build a huge building to make better use of the land Recycled concrete is predominantly employed in both workplaces and homes. However, tall structures are susceptible to collapse, especially when subjected to seismic activities and wind vibrations. The structure is subjected to high tension and displacement of lateral forces and can withstand vertical forces with adequate stiffness for horizontal forces. The stability of …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 21–37 Read article
-
Visual Assessment of Pavement Surface Condition for Baghdad International Airport
Abstract: Abstract In the process of developing the infrastructure of Baghdad international airport, visual assessment was undertaken to evaluate the concrete pavement surface condition. The walk through technique was implemented, all types of pavement distresses have been detected visually and captured with camera of high resolution. It was observed that the block and fatigue cracking of pavement surface was concentrated at the threshold part (touch down zone) of the runway, while …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 2, Issue 1, 2016 · pp. 1–9 Read article
-
ASSESSMENT OF FOUNDATION SIZE AND REINFORCEMENT USED FOR FOUNDATION BASE OF PIER FOR STEEL GIRDER RAILWAY BRIDGE.
Abstract: The analysis of foundation size and reinforcement is conducted with respect to the overall load exerted on the foundation base. This includes considering the load imposed by trains, the weight of the girder, and the pier. To ensure the structural integrity and stability of the foundation base, M25 grade concrete and Fe 500 grade steel are utilized. In order to counteract bending forces, 20 φ diameter steel bars are incorporated …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 1, 2023 · pp. 13–18 Read article
-
A Review on Processing of Waste PET (Polyethylene Terephthalate) Plastics
Abstract: Solid waste is essentially waste produced in our homes, businesses and industrial sources. Globally waste production is growing in volume and in toxicity. Plastic waste is a nature threat that is of great concern to the researches to refuse and reuse. The man-made systems emphasize the economic value of materials and energy where production and consumption are the extensive economic actions. Such systems are a threat to the environment as …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Design And Fabrication Of Foot Wear Garbage Reinforcement Fly Ash And Paver Block
Abstract: Nowadays, the paving blocks and fly ash that in the market are heavy and the price are costly. This study will introduce the lightweight paving blocks and more affordable because the foot wear waste materials are use in the development of the concrete paving blocks and fly ash bricks namely as Eco-Friendly Paving Block and fly ash are make. Eco paving blocks will be compared to control paving blocks due …
Published in International Journal of Manufacturing and Materials Processing · Vol. 9, Issue 2, 2023 · pp. 32–37 Read article
-
From Waste to Walls: A Comparative Study of Recycled Buildings in India
Abstract: As the construction sector across the world is compelled to rein in its environmental impact – currently, estimated at nearly 40% of global carbon emissions – the use of recycled materials is no longer a secondary aesthetic option but a structural imperative. This paper presents a comparative study of pioneering Indian architectural projects that assess the effectiveness of diverted waste streams in contemporary construction. Three iconic projects to be discussed …
Published in International Journal of Sustainable Building Technology · Vol. 9, Issue 2, 2026 Read article
-
Comparative Analysis of a G+29 RCC Building under Indian Wind Zones III, IV, and V Using Parametric BIM–FEM Integrated Workflow
Abstract: The increasing demand for high-rise reinforced concrete (RCC) buildings in urban regions has made wind-load assessment an important aspect of structural design. In tall buildings, wind-induced lateral forces significantly affect serviceability performance, structural stability, and occupant comfort. Recent advancements in Building Information Modelling (BIM) and finite element–based structural analysis have improved the efficiency, accuracy, and interoperability of structural design workflows. The present study investigates the comparative wind response of a …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 2, 2026 Read article
-
Next-Generation Radioactive Waste Treatment and Long-Term Containment Strategies
Abstract: *Author for Correspondence Sri Charitha Annam E-mail: [email protected] The safe management and disposal of radioactive waste is one of the most critical unsolved challenges in the continued development and use of nuclear energy. Radioactivity is the emission of energy from a radioactive material. Most of the time, this energy is used for power, medical, and industrial purposes. Unfortunately, all this use of energy gives rise to its waste. The impact …
Published in International Journal of Chemical Separation Technology · Vol. 12, Issue 1, 2026 · pp. 23–29 Read article
-
Development of a Simplified Predictive Equation for Foundation Depth Using Soil and Load Parameters
Abstract: Abstract- This study presents the analysis and design of shallow foundations subjected to vertical and lateral loads, considering the self-weight of structural elements and soil bearing capacity. Two loading cases are examined to evaluate the stability and suitability of foundation dimensions. In the first case, a column load of 120 t is considered, with an additional self-weight of 2.40 t, resulting in a total load of 122.40 t. Including 10% …
Published in International Journal of Structural Engineering and Analysis · Vol. 12, Issue 1, 2026 Read article
-
A Review: Performance analysis of overlapping shear keys in box girder bridges using finite element based software
Abstract: Abstract - Box girder bridges are widely used for long-span constructions due to their high strength-to-weight ratio and structural efficiency. A fundamental component in these bridges is the shear key which allows for effective transfer of loads between bridge segments and upholds the overall structural performance through the different load cases. Overlapping shear keys are becoming increasingly popular because they greatly enhance inter-segment connections, which decrease relative displacements. This paper …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 38–47 Read article
-
Structural Efficiency and Sustainability of Bamboo Architecture: Material Performance, Joinery Techniques and Contemporary Applications
Abstract: Abstract Bamboo is increasingly recognised as a structurally efficient and environmentally responsible construction material, offering a viable alternative to conventional high-carbon materials such as steel, concrete, and engineered timber. Its rapid renewability, high tensile strength, low embodied energy, and favourable strength-to-weight ratio position bamboo as a key material for sustainable architecture in both vernacular and contemporary contexts. This paper presents a comprehensive assessment of bamboo architecture by examining material performance, …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 1, 2026 · pp. 48–55 Read article
-
Sulfur-Based Copolymers: Current Status and NewOpportunities in Synthesis and Product Applications
Abstract: Sulfur-based copolymers are fascinating materials with a wide range of applications. This reviewarticle delves into the synthetic aspects of sulfur copolymers, their characteristics, and theirapplications. Sulfur is a byproduct of refineries, produced in large quantities worldwide. Varioussulfur-based copolymers have been synthesized through inverse vulcanization, catalyst-induced low temperature inverse vulcanization, and polycondensation reactions. Researchers have studied a varietyof monomers, including benzoxazine moieties and sulfur-based systems with allylic or vinylicfunctionalities. The article …
Published in International Journal of Polymer Science and Engineering · Vol. 11, Issue 1, 2025 · pp. 10–36 Read article
-
EROSION OF UNDERLYING SOIL
Abstract: Abstract : To protect underlying soil erosion on which foundation base is provided like apron provided in water retaining structure like dam, weir etc. In flood zone area this apron is provided at foundation base of building, near village which is situated near bank of river underlying soil erosion will be prevented when apron is provided. Near bank of river (village situated) for protection of village near bank of river …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 11, Issue 2, 2025 · pp. 20–25 Read article
-
ANALYTICAL STUDY ON THE DYNAMIC BEHAVIOR OF RC HIGH-RISE BUILDINGS WITH STAGGERED OPENINGS IN SHEAR WALLS
Abstract: ABSTRACT - This research investigates the seismic performance of a 15-storey reinforced concrete building with varying shear wall configurations, focusing on the effects of vertical and staggered openings. The study compares three models: one with solid shear walls, one with vertical openings, and one with staggered openings. Using ETABS V21 software and performing the analysis in Seismic Zone IV under the Response Spectrum Method (IS 1893:2016), the results show that …
Published in International Journal of Construction Engineering and Planning · Vol. 11, Issue 2, 2025 · pp. 35–50 Read article
-
Study of Corrosion and Corrosion Protection of Rebar Steel in Saline water
Abstract: Corrosion is major problem with metals. When they come in contact of surrounding corrosive medium to construct a corrosion cell on their interface, metals undergo in corrosion reactions. Such environments metals can be exhibited uniform, galvanic, pitting, stress, crevice, embrittlement, intergranular corrosion etc. The corrosion of phenomenon of rebar steel studied in saline water. It creates corrosive medium for rebar steel due to availability of chloride ions. Rebar steel is …
Published in International Journal of Metallurgy and Alloys · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
Advanced Geotechnical Analysis of Soil-Structure Interaction in High-Rise Building Foundations
Abstract: AbstractThe stability of high-rise buildings is fundamentally influenced by the interaction between theirfoundations and the underlying soil. This study provides a comprehensive analysis of soil-structureinteraction (SSI) with a particular emphasis on settlement behavior, load distribution, and seismicresilience. By utilizing finite element modeling (FEM) and advanced soil mechanics principles, theresearch evaluates various foundation systems, including deep pile foundations, mat foundations, andhybrid configurations, to determine their effectiveness in diverse geotechnical conditions. The …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 11, Issue 1, 2025 · pp. 49–54 Read article
-
Living Materials: Pioneering Eco-Driven Innovations in Sustainable Construction
Abstract: Abstract This research delves into the transformative potential of living materials, emphasizing the significance of bio-based and nature-inspired innovations in advancing sustainable construction practices. Living materials, derived from renewable resources, such as mycelium, algae, and bamboo, offer an environmentally friendly and sustainable alternative to conventional building materials, like concrete and steel, which are often resource-intensive and environmentally detrimental. This study explores the structural properties, ecological benefits, and practicality of these …
Published in International Journal of Construction Engineering and Planning · Vol. 11, Issue 1, 2025 · pp. 8–14 Read article