Search
1334 articles for “Rats”
-
A Comparative Analysis of a Single Feed Circularly Polarized Micro-strip Patch Antenna with U-Slot & L-Slot
Abstract: This paper compares the different parameters for a single feed circularly polarized Micro-strip patch antenna with U-slot and L-slot. The proposed antenna 1 contains a U-Slot and designed with DGS technique to reduce the size of antenna and proposed antenna 2 contains a L-slot and designed with DGS technique to reduce the size of antenna. The antenna with L-slot is designed on a high dielectric constant (εr = 10.2) substrate …
Published in International Journal of Broadband Cellular Communication · Vol. 1, Issue 1, 2015 · pp. 6–11 Read article
-
Implementation of OFDM System Using 256 Point IFFT and FFT
Abstract: OFDM is a special case of multicarrier transmission, where a single data stream is transmitted over a number of lower rate subcarriers. The main reason to use OFDM is to increase the robustness against the selective fading or narrowband interference. A large number of closely spaced orthogonal sub-carrier signals are used to carry data on several parallel data streams or channels. Each sub-carrier is modulated with a conventional modulation scheme …
Published in International Journal of Broadband Cellular Communication · Vol. 2, Issue 1, 2016 · pp. 26–29 Read article
-
Power control in wireless cellular network using QOS constrained convex optimization
Abstract: For wireless cellular network with different QoS (Quality of service) constraints , a variety of power control problems with different objective functions and constraints can be formulated as non linear optimization. With the use of convex optimization they can accommodate realistic QoS constraints e.g. data rate, outage probability, throughput and SIR. In the high SIR regime these properties can be solved by converting into convex optimization problems in the form …
Published in International Journal of Broadband Cellular Communication · Vol. 3, Issue 2, 2017 · pp. 19–25 Read article
-
Lab View-Based Wireless Health Monitoring System Using GSM
Abstract: In India, numerous patients are biting the dust in light of heart assaults and purpose for that they are not getting auspicious and appropriate offer assistance. To give them opportune and appropriate enable first we to need to nonstop checking of patient wellbeing. The settled checking framework can be utilized just when the patient is on informal lodging framework are immense and just accessible in the healing facilities in intensive …
Published in International Journal of Broadband Cellular Communication · Vol. 3, Issue 2, 2017 · pp. 14–18 Read article
-
Adaptive Modulation Coding for MIMO OFDM
Abstract: Wireless communication is one of the mainly active areas of tools progress and has become an ever-more essential and prominent part of everyday life. Several transmission modes are defined in LTE standards. A very little transmission modes are considering for LTE in physical layer parameters and wireless channel characteristics. We evaluated the act of available transmission modes in LTE. However, performance analysis can be done straightforward using evaluation of LTE. …
Published in International Journal of Broadband Cellular Communication · Vol. 4, Issue 2, 2018 · pp. 14–22 Read article
-
Horn Antenna Analysis and Simulation for the High-Frequency Electromagnetic Compatibility Band 18-40 GHz
Abstract: An antenna is a type of transducer that converts radio signals into alternating electromagnetic waves before transmitting them into space. Polarization is a phase in the selection and installation of an antenna. It can send and receive signals. An antenna is a metal structure that transmits or receives electromagnetic radiation. The antenna, on the other hand, connects the directing device to free space. It sends a signal from the generator …
Published in International Journal of Broadband Cellular Communication · Vol. 9, Issue 1, 2023 · pp. 10–24 Read article
-
Controller for Higher Order DC-DC Converter
Abstract: ABSTRACT Conventional boost converter is having two energy storage elements (one capacitor and one inductor). So, it is usually called as second order boost converter. It operates under two modes. In the first switch is on and the diode is off due to which inductor current rises linearly. The rate of inductor current will be in the ratio of input voltage to the inductance. Diode blocks the capacitor from being …
Published in International Journal of Digital Communication and Analog Signals · Vol. 5, Issue 1, 2019 · pp. 19–23 Read article
-
Effects of Industrial Waste Filler Content and Compatibilizer on the Performance of Thermoplastic Polymer Composites
Abstract: In this study, we examine the physico-mechanical characteristics of waste filler-thermoplastic polymer composites in relation to the industrial waste filler mixing ratio and compatibilizer concentrations. Three degrees of coupling agent (Epolene E-43) content and four levels of waste filler to thermoplastic polymer mixing ratios were used in the experiment to examine the physical and mechanical characteristics of the composite. As was to be predicted, composite density grew as waste filler …
Published in International Journal of Applied Nanotechnology · Vol. 9, Issue 2, 2023 · pp. 12–21 Read article
-
Study of Balanced Energy Absorbing Material for Structural Applications.
Abstract: The ballistic execution of "smart-sized" S2-glass fiber fortified epoxy was assessed in correlation with network perfect, framework semi-good and lattice contradictory estimated materials. The smart size is a detailing intended to give rate-subordinate conduct. The brilliant estimated material was appeared to show rate subordinate changes in interlaminar shear quality and mode I interlaminar break sturdiness testing; the ballistic execution of the material was enhanced just marginally over perfect measured materials. …
Published in International Journal of Energetic Materials · Vol. 4, Issue 2, 2018 · pp. 34–42 Read article
-
Comparative Study of Machining Parameters on Electrical Discharge Machining of Inconel 718 using Copper and Copper- Tungsten Electrode.
Abstract: The present scenario in all the manufacturing industries is to make a priority list to cope up the challenges imposed by the superior materials like alloys, ceramics and composite materials which have difficulty for machining. In this study, comparison of experimental results which is found by optimization of machining parameters on material removal and tool wear rate along with two different electrodes material such as copper and copper tungsten for …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 1–8 Read article
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
Free Vibration Analysis of Laminated Composite Plate with Various Boundary Condition Using FEM
Abstract: The vibration analysis of laminated composite plates is analyzed using finite element method. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been developed using an appropriate eight node isoparametric element (SHELL281) from the ANSYS element library. In this paper Numerical results have been computed for the effect of material properties, thickness ratio …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 1–7 Read article
-
Mechanical Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers: Fabrication and Evaluation
Abstract: The goal of current research is to replace synthetic materials with natural, biodegradable, and renewable ones. A lot of study is being done on natural fiber composites because of its unique properties and environmental friendliness. Natural fibers are advantageous since they are easily accessible, manageable, and biodegradable. The goal of the current study is to evaluate the changes in the mechanical properties of polypropylene reinforced with chopped pineapple leaf and …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 20–31 Read article
-
Review on the Capillary Flow Characteristics in Polymer based Microfluidic Systems
Abstract: In this review different effects to control the surface-driven capillary flow in polymer based microfluidic systems. Author has used the polymers like polyimide, SU-8 and polymethylmethacrylate (PMMA) to fabricate the polymer based microfluidic systems. Author has studied the individual effects of surface wettability, surface free energy, surface chemistry, surface topography, channel aspect ratio, capillary pressure, kinetic energy, centrifugal force, surface area to volume ratio, microfluidic friction, liquid viscosity and effective …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 1, 2018 · pp. 28–33 Read article
-
Experimental Studies on the Surface-Driven Microfluidic Flow of Dyed Working Liquids in Sudden Expansion Microchannels Fabricated by Polymer
Abstract: In this experimental work, the sudden expansion microchannels are fabricated by maskless lithography, hot embossing lithography, drilling, direct bonding technique and chip separation technique using own hands-on of author completely. Total 15 individual sudden expansion microchannels are fabricated in this work using polymethylmethacrylate (PMMA) as optically transparent polymer. Effects of channel aspect ratio, surface wettability and liquid viscosity on surface-driven microfluidic flow are experimentally studied in the fabricated sudden expansion …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 1, 2020 · pp. 44–59 Read article
-
Performance Calculation of a Gas Plant Compressor Unit
Abstract: This research was centered on calculating the performance of a gas plant compressor unit which was achieved using Tunu Booster Station facility. The results shows that the ability of the compressor, isentropic efficiency and coefficient of performance of the compressor gave values of 33899kw, 0.83 and 1.2. The deviations from the existing plant values were 35.6%, 31.7% and 20% respectively. Other parameters that were considered and evaluated include the failure …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 13–24 Read article
-
Review of Optimization Process Parameters in Welding system
Abstract: This study was based on design of experiment (DOE) using Taguchi method with four welding parameters namely welding current, welding speed, root gap and electrode angle considered for experimentation. An orthogonal array of L9 experimental design was adopted and ultimate tensile strength was investigated for each experimental run. The tensile test was carried out on extracted welded and unwelded specimens using universal testing machine (UTM). Microstructures of the welded specimens …
Published in International Journal of Manufacturing and Materials Processing · Vol. 2, Issue 1, 2016 · pp. 48–54 Read article
-
Galerkin Method of Weighted Residual to Study on Enhanced Heat Transfer in Cylindrical Micro-Fins Heat Sink Using Artificial Surface Roughness
Abstract: In this paper, a theoretical investigation is carried out on the use of artificial surface roughness for enhanced heat transfer and thermal management of cylindrical micro-fins with artificial surface roughness. The developed thermal models which are solved using Galerkin method of weighted residual, considered variable thermal properties according to linear, exponential and power laws. The approximate analytical solutions are used to carry out parametric studies and to establish the thermal …
Published in International Journal of Manufacturing and Materials Processing · Vol. 4, Issue 2, 2018 · pp. 12–22 Read article
-
International Journal of Manufacturing and Materials Processing
Abstract: Friction and wear resistance were studied on SiC-based novel ceramic composite for applications in advanced automotive braking systems. In the present work, SiC-based ceramic composite was prepared by solid-state reaction synthesis route using a fine powder of precursors. The product was investigated for wear rate under different load conditions in the range from 10N to 70N and speed conditions in the range from 0.13 m/s to 0.52 m/s. The present …
Published in International Journal of Manufacturing and Materials Processing · Vol. 7, Issue 1, 2021 · pp. 14–24 Read article
-
CFD Analysis of Earth Heat Exchanger with Air as a Cooling Medium
Abstract: An earth air tube heat exchanger (EATHE) uses the thermal energy of the ground for the air cooling in summer and air heating in winter due to the temperature difference between the air and underground surface. With the help of EATHE we can reduce the energy consumption required for space heating or cooling. However, for determining the surface heat convection, due to lack of available methods it is difficult to …
Published in International Journal of Computer Aided Manufacturing · Vol. 3, Issue 2, 2017 · pp. 21–30 Read article