Search
688 articles for “strength”
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Feasibility Study on Spent Pot Lining (SPL) as Raw Material in Cement Manufacture Process
Abstract: SPL is a waste material that comes free from the production of Aluminum industrial. SPL is separated in two fractions: a carbon-rich fraction referred to as “first cut” and a refractories rich fraction referred to as “second cut”. One commonly used solution is the processing of SPL fractions in cement kilns. The primary reasons for the cement producer to process the SPL are the reduction in raw material costs from …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 2, 2016 · pp. 18–26 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Synthesis and Mechanistic Interpretation of Hydrolytic Dephosphorylation of Monoamidate of 2,4-dichloro aniline phosphate in Acid Media
Abstract: Synthesis of mono 2.4-dichloroanniline phosphate was carried out using POCl3 as phosphorylating reagent and the kinetic study of monoamidate of 2,4-dichloroaniline phosphate was conducted in an acidic medium ranging from 0.01 to 7.0 mol dm-3at a temperature of 50°C. A notable feature of the acid log rate profile was the presence of a rate maximum at 4.0 mol dm-3. The decrease in rate beyond 4.0 mol dm-3 can be explained …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 26–30 Read article
-
Stabilization of Landslide Affected Soil Using Silica Fume Glass Fiber Powder and Sodium Silicate
Abstract: Highly swelling soils are present in many parts of Tamil Nadu and they are highly problematic in utilizing for the structural purpose. Numerous studies were conducted using several materials for stabilizing them; through literature study it’s found that a single material such as lime or cement is not suitable for stabilizing the concerned soil owing to several bottlenecks. In this study we had made an elaborate attempt to utilize manufactured …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 2, 2017 · pp. 9–17 Read article
-
EXPERIMENTAL INVESTIGATION ON GEOPOLYMER CONCRETE
Abstract: The project report entitled “Experimental investigation on alkali activated concrete” describes the detailed experimental work carried out on Alkali Activated Alumina-silicate concrete [Provis and Deventer, 2009]. The fly ash- Ground Granulated Blast Furnace Slag (GGBFS) based Alkali Activated Alumina-silicate concrete cured at ambient temperature was prepared by using different molarities of Alkali Activated solution namely 8M, 12M and 16M. The properties of concrete such as workability, compressive strength, Pull-out test/bond …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 17–22 Read article
-
Utilization of Steel Slag as Course Aggregate
Abstract: Concrete is the third largest material consumed by human being after food and water as per WHO. Concrete plays a vital role in the design and construction of the nation’s infrastructure. Almost three quarters of the volume of concrete is composed of aggregate. These are obtained from natural rocks and river beds, thus degradation them slowly. This issue of environment degradation, and need for aggregates demands for the usage of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 14–18 Read article
-
Utilization of Waste Plastics as a Fiber in Concrete
Abstract: The rapid urbanization and industrialization all over the world has resulted in large deposition of plastic waste. Disposal of plastic waste in an environment is considered to be big hazard due to its very low biodegradability and presence in large quantities. In order to minimize the problem, the proposed concrete which is made by adding plastics in concrete may help to reuse the plastics and to study the properties of …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 56–60 Read article
-
Modulus of Elasticity of Steel Fiber Reinforced Concrete with Metakaolin
Abstract: In this paper the attempt has been made to study the results of an experimental investigation using steel fiber (SF) and metakaolin (MK) on the properties of structural concrete. Crimped steel fibers of aspect ratio 85 and MK were used in this investigation. The effects of these fiber and MK on workability, density, and on various strengths of M60 grade concrete are studied. Fiber content varies from 2.5% to 10% …
Published in International Journal of Concrete Technology · Vol. 3, Issue 2, 2017 · pp. 50–59 Read article
-
Concrete Quality Evaluation Using Non-destructive Test
Abstract: This paper analyses the non-destructive testing (NDT) measurements used to assess on site strength and condition of reinforced concrete. To ascertain the residual strength of concrete, extent of corrosion, it is imperative to assess the health of the RC structural members of a building using State-of-the-art non-destructive testing (NDT). NDT of concrete structure is carried out in order to assess the health of structure without impairment of its desirable properties. …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
An Experimental Study on Concrete by Replacement of Coarse Aggregate with Demolished Building Waste in Crushed Concrete
Abstract: A large amount of construction and demolition wastes are produced annually in India. These waste materials require a large place to dispose and then the disposal of wastes has become a severe problem. The continuous use of natural resources for making conventional concrete leads to the reduction in their availability and results in the increase of the cost of the coarse aggregate and fine aggregate. The possible use of recycling …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 25–28 Read article
-
Suitability of Concrete Containing Fly Ash Along with Alccofine
Abstract: With the growing urbanization and rising standard of living and purchasing power of men the demand of concrete does not look to become dormant. But due to limited supply of non-renewable constituents of concrete they are needed to be preserved for the future generation, so there is utmost necessity of using supplementary waste materials in concrete. With advancement in science and technology itis made possible that the waste materials like …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 15–20 Read article
-
Study on Partial Replacement of Cement by Bagasse Ash in Cement Concrete
Abstract: Today, researchers all over the world are trying to utilize agricultural wastes like corncob ash, rice husk ash, bagasse ash as a partial replacement of cement, thereby reducing cement production and greenhouse gases emissions. Sugarcane bagasse is a fibrous waste product of sugarcane refining industry and being disposed to open landfills causing serious environmental impacts. In this study, Bagasse ash was partially replaced in the ratio of 0%, 5%, 10%, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 29–35 Read article
-
Utilization of Paper Waste in Making of Cement Concrete
Abstract: Cement manufacturing industry is one of the main carbon dioxide constructing sources moreover burning of fossil fuels and deforestation and concrete industry is one of the major consumers of natural virgin materials. India is the country that is facing a severe contest in the disposing the waste in landfills throughout the country. The landfill disposal is resulting in high disposal costs and potential environmental problems. If the current situation continues, …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 36–41 Read article
-
Experimental Investigation On Partial Replacement Of Fine Aggregate By Wood Ash On Concrete
Abstract: This paper intends to investigate the possibility of producing low costs enhanced performance concrete by wood ash. By taking the enormous amount of sand in river beds, it affects the environment badly and demand for fine aggregate is increase day by day. So by partially replacing Prosopis juliflora ash with fine aggregate in construction field, It can serve both the purposes of meeting the demands of construction industry and at …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 10–16 Read article
-
Usage of fly ash and slag as supplementary cementitious materials in engineered cementitious composites (ECCs) – A Review
Abstract: Researchers evolved Engineered Cementitious Composite (ECC) in the Nineties, belong to the family of high-performance fibre-reinforced cementitious composites. ECC, additionally known as bendable concrete as a ductile alternative to conventional concrete. ECC requires a huge amount ofsupplementary cementitious material (fly ash), contributing to sustainable development. In this paper, a review of ECC studied with supplementary cementitious materialswhich includefly ash and slag. ECC has better tensile strength, ductility and durability properties …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 44–55 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Stabilization of Red soil by using Boiler Feed Ash
Abstract: Red soil is the one of the irrigation soil. Most of plants are grown in this soil. The red soil has the most iron content when compared to other soils and it has also got various chemical properties. The red soil has less bearing strength and more water permeability. By the addition of fly ash and BFA to the red soil the liquid limit, plastic limit and bearing strength can …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 1, 2015 · pp. 9–13 Read article
-
Evaluation of Soil Reinforcement Potential of Grass Variety
Abstract: Reinforcement potential of plant root is studied by many researches across the globe. This work aims to analyze the effect of grass root in the improvement of engineering properties of soil. Plant roots being a natural material help in enhancing the shear strength of soil. Field and laboratory studies were conducted on a grass variety (Co-4) and the soil reinforcement potential of the plant is studied. It is found that …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 1, 2015 · pp. 14–18 Read article
-
Effect of Varying Shear Velocity on the Mechanical Behavior of Jointed Rock Subjected To Lower Normal Load
Abstract: : This study investigates the effect of shearing velocity on the mechanical behavior of rock joints, namely, the shear strength, residual strength, joint dilation, its surface roughness and the shearing stiffness under the application of lower normal load. The slower rate of shearing plays an important role in creep and the fatigue effect on jointed rock masses whereas, higher rate of shearing is experienced in the cases of dynamic loadings …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article