Search
806 articles for “TEM”
-
Characterization and Wear Behavior of TiN, TiAlN, TiCrN and AlCrN PVD Coatings Deposited onto AISI H13 Hot Forging Die Steel
Abstract: Four Nitride coatings TiN, TiAlN, TiCrN and AlCrN were deposited onto AISI H13 hot work die steel by cathodic arc evaporation physical vapour deposition (PVD) technique. The coatings were characterized by SEM, SEM-EDS, XRD, line scan EDS and X-Ray mapping tests and micro hardness tester. The wear characteristics were investigated using a pin on disc method at high temperature and speed against En-31 bearing steel disc. It was observed that …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Study the Corrosive Effect of Greenhouse Gases on Metallic and Non-metallic Materials
Abstract: Carbon dioxide is a major corrosive pollutant for building materials. It enters inside materials by diffusion or osmosis process and in presence of moisture it produces H2CO3 which decrease the pH value and accelerates chemical and electrochemical reaction with building materials. The carbonation reaction produces deterioration inside and outside of building materials. It produces corrosion reaction with metallic bar and disbanding with concrete. CO2 reacts with Ca (OH)2 and Mg(OH)2 …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 17–28 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Nanotechnology Based Drug Delivery System in Tuberculosis: Review
Abstract: From near the beginning centuries to present life Tuberculosis remains the world-wide disease without any limitations. In the other hand, in some cases in the infected individuals the disease remains in a dormant state. In this stage the treatment is hard as the lipid mycobacterial wall is thick & the delivery of drug inside the bacterial cell is difficult. Due to this new face of TB it becomes the major …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 2, 2017 · pp. 14–24 Read article
-
Study the properties of spin-coated Co-doped ZnO (CZO) thin Film
Abstract: Co doped ZnO (COZ) nanoparticles were prepared by spray pyrolysis technique followed by annealing at three different temperatures. XRD, UV- Vis spectroscopy, Photoluminescence (PL) studies, Scanning electron microscopy (SE), and vibrating sample magnetometry (VSM) studies were made to analyze the structural, optical and magnetic properties. XRD pattern confirmed the improved crystallinity after annealing and the formation of hematite phase. A UV-visible spectrum indicates that the nanoparticles exhibit the blue shifting …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 26–35 Read article
-
Amorphous Carbon Nanotube-MoS2 Nanohybrids : A New Future Material in the Application of Battery, Supercapacitor and Field-emission Display Devices
Abstract: The discovery of graphene make the researcher interested towards the other two-dimensional material which has quite similar properties like graphene. Among them, MoS2 nanosheets has extraordinary optoelectronic and physical properties. It has several applications in developing battery, sensor, optoelectronic device etc. On the other hand, amorphous carbon nanotube can be synthesized by using a low temperature chemical process. Due to the easy processing of amorphous carbon nanotube (ACNT), good optoelectronic …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 5, Issue 2, 2019 · pp. 36–45 Read article
-
Computation of Gas Turbine System as Renewable Energy Conversion Mechanisms
Abstract: In the present work thermo-economic analysis of a cogeneration cycle is carried out so that any power generation industry can choose best power generation system out of the choices available with organisation. Mathematical modeling for the cost evaluation of each component is developed and results are obtained with computational programming tool EES (Engineering Equation Solver). Form results it is being found that with change in combustion chamber outlet temperature or …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 1, 2016 · pp. 10–15 Read article
-
Study on the Properties and Applications of Thermoplastic
Abstract: Hot-applied thermoplastic is prepared for road deposition in a melting apparatus where the granular or block material is introduced and heated until it liquefies at temperatures exceeding 400F. When applied on asphaltic concrete, thermoplastic material develops a thermal bond via heat- fusion. A thermoplastic is a material, usually a plastic polymer, which becomes soft when heated and hard when cooled. Thermoplastic materials can be cooled and heated several times without …
Published in International Journal of Composite and Constituent Materials · Vol. 3, Issue 2, 2017 · pp. 16–21 Read article
-
Microstructure Dependence of Electrical Properties in AgI- and Ag2S-Doped Glass Nanocomposites
Abstract: In this paper, we report the study of microstructure dependence of ion conduction for several AgI- and Ag2S-doped glasses and glass nanocomposites systems. The structure and electrical properties of these samples have been studied and the effects of formation of nanocrystalline phases on the electrical properties of these glasses are presented. The microstructure of these glasses was studied employing transmission electron microscope (TEM). The temperature dependence of dc conductivity shows …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 9–13 Read article
-
Market Assessment of Polymer Matrix Composites
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase. Polymer-matrix composites are valued in the aerospace industry for their stiffness, lightness, and heat resistance. They are fabricated materials in which carbon or hydrocarbon fibres (and sometimes metallic strands, …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 16–22 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Thermogravimetic Study Of Chrysodine Dye Type Bridge Containing Bis (8-quinolinol)s Ligands and Their Coordination Polymers
Abstract: Our thermogravimetric analysis state that the degradation in chrysodine dye type bridge containing bis (8-quinolinol)s metal coordination polymers was initiated at almost the same temperature near about 25-500 C(T0). The remarkable difference is observed in the mode of thermal degradation of the parent ligand and its coordination polymer. The unchelated bis(8-quinolinol) ligand and coordination polymers begin to decompose almost at the same temperature but in the polymer chelates this decomposition …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 32–40 Read article
-
Characterization of the Impact Strength in Cryogenic Treatment of TIG Welded Nickel-based Superalloy
Abstract: The TIG welding of the IN617 heat and oxidation resistant has been precisely controlled through welding parameters, while γ'-Ni3(Al, Ti) phases predominantly controlled solution strengthening, and precipitation strengthening and carbides in γ matrix, as well as γ' precipitate’s shearing mechanism is prominent to enhance strength of superalloys. The high hardness has been preserved owing to strengthening major elements such as Cr, Co, and Mo etc., and the well coherency maintain …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Green Adhesive—Using Glyoxalated Lignin and Hydrogenated Resin as Ecologically Safe Wood Adhesive for Interior Plywood
Abstract: Petroleum-based adhesive such as urea formaldehyde and phenol formaldehyde resin dominates adhesive market which releases formaldehyde and VOC to the environment. The purpose of this study is to develop an adhesive based on isocyanate in combination with compounds from renewable sources like lignin, protein and starch. Adhesive formulation was developed by incorporation of hydrogenated resin, corn starch/PVOH emulsion with glyoxalated lignin (GL) and evaluation properties of the adhesive with plywood …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 · pp. 23–27 Read article
-
MISCIBILITY EVALUATION OF POLYSTYRENE AND POLY(METHYL METHACRYLATE) BLENDS: ANALYSIS OF MECHANICAL, THERMAL, MORPHOLOGY, AND VISCOELASTIC PROPERTIES
Abstract: Partially miscible blend of polystyrene (PS) and poly(methyl methacrylate) (PMMA) was successfully prepared employing melt blending technique. In order to impart miscibility, the processing was carried out at temperature above upper critical solution temperature (UCST) as studied from cloud point measurements. The complex modulii and viscosity derived from melt rheology analysis as a function of angular frequency were also used to study the effect of PMMA loading on the miscibility …
Published in International Journal of Polymer Science and Engineering · Vol. 1, Issue 1-2, 2015 Read article
-
Similar Analysis of Blend of Virgin PVC and NBR with Recycled PVC and NBR
Abstract: Studies about led on mixing of polymers like acrylonitrile butadiene elastic (NBR) and polyvinylchloride (PVC) to deliver new polymeric materials with particular properties which can be utilized for some exceptional applications. This mix has been formulated for items working in contact with castor oils. Mixes at various temperature show that an ideal temperature exists for its arrangement. Incorporating PVC in various compositions has enhanced their physico-mechanical and chemical properties of …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 1, 2016 Read article
-
Aerogel to Study Nano-composite
Abstract: This article has linked to economic aerogel utility of build as by apply of thermal insulation from high and low temptation than usual subscription. Aerogel for building construction always esteemed to be damp proof reticulated architected formation. Space mission is inclusive afterwards as an energy absorber. Typified composite form mostly subjected to class as notified form after solidification on drying gelatinous composes from carbon, clay and silica. Multifunctional material characteristics …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 1, 2021 · pp. 1–10 Read article
-
Modification of Poly Vinyl alcohol by Grafting and Appropriate Blending for Higher Stability and Biomedical field Application
Abstract: PVA is a one of the most important vinyl polymer which is widely used in industrial applications. PVA polymer has excellent adhesive property, solubility in water and it is biodegradable. But when it is modified by appropriate crosslinking or grafting or blending techniques then its physical as well as stability is altered. When polymer is modified by blending with other materials then its degradability decreases but thermal stability increases. In …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 27–33 Read article
-
The Current and Potential Usage Areas of Shape Memory Polymer Composites in the Class of Multifunctional Materials
Abstract: Shape memory polymer composites can be programmed into a temporary shape and recover their original shape by applying different stimuli as temperature, UV, magnetic and electrical.In this way, SMPCs in the active and deformable material class, due to its advantages such as being activated by various activation methods and good biocompatibility properties, it has become the focus of research in the field of creating multifunctional materials. They are widely used …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 1–4 Read article
-
Investigation the Potential of Sugarcane Bagasse for the Production of 5-HydroMethylFurfural
Abstract: The aim of this study was to invesigate the potential of sugarcane bagasse for 5-Hydroxymethylfurfural (5-HMF). Nowadays, food crops such as glucose and fructose were the main derived for the production of 5-HMF. The potential of sugarcane bagasse to replace the consumption of glucose and fructose was investigated through studies. Consequently, the primary aim of this research was to explore the feasibility of utilizing bagasse as a source for generating …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 21–29 Read article