Search
333 articles for “ash”
-
Synthesis, Characterization and Optimization of Essential Oil from Pumpkin Seed
Abstract: The main aim of this research work was extraction, characterization and optimization of essential oil from pumpkin seed, cucurbita pepo variety using ethanol as a solvent. The extraction was carried out by using a Soxhlet, leaching method and oil was separated from solvents by using rotary evaporator. Pumpkin seed was analyzed for proximate analysis and found that moisture content of 5.21 , crude proteins content of 22.50.31%, crude fat content …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 1, 2021 · pp. 6–27 Read article
-
Development of Geo-Polymer based Light Weight Bricks
Abstract: Light weight geopolymer bricks were developed during this study. The mix was made with lime sodium silicate and fly ash as ingredients. A maximum shrinkage was observed at CaO lime ratio of 1.0. Bulk densities were also lower at the ratio of 1.0. The maximum cold crushing strength (CCS) value was found at the ratio of 0.745. Increase in mix water decreased the strength. Water content of 24% is recommended …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 1, Issue 1, 2015 Read article
-
Synthesis of Zeolites: An Overview
Abstract: Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents and catalysts. Zeolite synthesized from CFA is a minor but interesting product, with high environmental applications. Zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. This paper provides an overview on the methodologies for zeolite synthesis from CFA, and a detailed description of conventional alkaline conversion processes, with special emphasis on the experimental conditions to …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 8–14 Read article
-
Study of Shear Strength Behaviour of Soil With Kaolinite Mixture
Abstract: An experimental testing program was undertaken for evaluating the effect of kaolinite on the strength properties of locally available sand and soil. Strength depends principally upon the content of (1) water, (2) clastic materials and (3) plastic materials. Soils are primarily of two types (1) cohesionless soils in which the strength this produced mainly by the friction of clastic particles against one another, and (2) cohesive soils in which the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 1–5 Read article
-
Impact of Sugarcane Molasses on Compressive Strength and Workability
Abstract: Molasses used as admixture increase the workability, it is a by-product of sugar industry. In this study, mechanical property such as compressive strength and workability of concrete adding fly ash and sugarcane molasses has been investigated. Adding the molasses in concrete increase the compressive strength, delay the initial and final setting time, reduced the bleeding and segregation of concrete and decrease the W/C ratio. The compressive strength test results showed …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 1–5 Read article
-
Review on the Performance of Fibre and Industrial Slag in Concrete
Abstract: This review paper discusses about the different types of fibre used in concrete at different periods with the mix parameter details. This review enlightens the effect of industrial waste such as Bottom ash, Copper slag, Ferro-chromium slag, Ground granulated blast furnace slag (GGBFS), Steel slag, Stainless steel slag as a substitute in concrete. The elaborate study on its chemical composition and also the merits and demerits of using the slag …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 16–30 Read article
-
Advantage of Microsilica in Concrete Compressive Strength
Abstract: Abstract Microsilica is an undefined sort of silica tidy for the most part gathered in sack house channels as by-result of the silicon and ferro-silicon generation. The paper condenses essential physical and synthetic properties of miniaturized scale silica and utilizes those outcomes for an assessment of small scale silica from a Health Safety and Environment (HSE) point of view. Small scale silica comprises of circular particles with a normal molecule …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 37–43 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
A Study on Self Compacting Concrete using Portland Pozzolana Cement
Abstract: Self-compacting concrete (SCC) is a type of highly flowable concrete that fills each and every corner of congested formwork without the need for mechanical vibration as it is placed by means of its own weight. Generally, the SCC is prepared by using Ordinary Portland Cement (OPC) with mineral and chemical admixtures. Portland Pozzolana Cement (PPC) itself contains some amount of fly ash, thus given the motivation to prepare the SCC …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 1–9 Read article
-
Admixtures Effect on Consistency Limits and Shrinkage Characteristics of Expansive Soil
Abstract: Effective usage of admixtures into the soil mixtures improves the characteristics of the soil for better construction. Particularly admixtures such as rice husk ash (RHA), quarry dust (QD) and flyash (FA) showed greater effect on the two types of expansive soils namely black cotton soil (BCS) and clayey soil. The percentage of admixtures is in the range of 0 to 30% at an interval of 10%. This study showed effective …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 1, 2018 · pp. 1–5 Read article
-
Novel Approach to Improve Stack Effect in High Rise Buildings
Abstract: This paper aims at improving stack effect in high rise buildings using an innovative approach. Parameters influencing stack effect in high rise buildings are identified based on standard theory and practice. A new draft number for estimating stack effect in high rise buildings is derived using Buckingham-П theorem. Airflow data of a university high rise building is considered in estimating stack effect. The draft number developed is enclosed in ANSYS …
Published in International Journal of Structural Engineering and Analysis · Vol. 1, Issue 1, 2015 · pp. 9–17 Read article
-
Eco-Friendly Smoking – A Clean Smoke for the Benefits of Climate and Foodstuffs
Abstract: The clean smoke smoking process protects the environment and ensures safe food. Smoking is indeed one of the oldest methods for preserving food; however, it is not quite the healthiest or the most beneficial to the environment. Despite all that tradition, a number of pollutants, primarily ash, tar and polycyclic aromatic hydrocarbons (PAHs), which are produced from smouldering wood, penetrate the food along with the smoke and are subsequently consumed. …
Published in International Journal of Energetic Materials · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
Implications of ceramic – metal matrix compose
Abstract: AbstractThis article summarizes some formatives over WC-metal matrix composite surfacing on hard as well soft alloys. Composite surface has coated by laser, plasma and electroplating. WC-Ni composite has prepared by plasma transferred arc welding on steel surface. Thickness achieved from several mm on small parts to thin deposits on large surfaces. Cu-substrate accorded WC-Ni laser cladded deposition. Laser deposition of WC-Ni-NiCr on stainless has increased wear and erosion under flowing …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 31–37 Read article