Search
1013 articles for “characterization”
-
Evaluation of Corrosion kinetics of zirconium dioxide dispersion strengthened Aluminium metal matrix composites
Abstract: The corrosion kinetics of Aluminum 7068-Zirconium dioxide composites is a major aspect for assessing the capability of utilizing the materials for aviation segments. Aluminum 7068 matrix is a particular class of composite which is known for its high strength characteristics even in critical situations and is utilized as a part of aerospace, automobile and ordinance applications. However the investigations on impact of reinforcements, for instance zirconium dioxide on corrosion conduct …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 9–23 Read article
-
Effect of Indigenous Micros on Metal Corrosion in Different Water Environment
Abstract: The research on the effect of indigenous micros on metal corrosion in different water environment in life sciences and other fields as well as their significance was investigated. Mild Steel is one of the construction materials used in the industries. It has a young modulus of 200GNm-2. This paper focuses on the experimental study for the effect of indigenous micros on metals in different water environment and also of the …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 1–10 Read article
-
Comparative Study of the Nature of Slag in the Formulation of Concrete Pavers
Abstract: The steel mill generates about 8000 tons/year of slag by transforming scrap metal to produce more than 60000 tons/year of wire rod and steel reinforcing bars. These co-products are stored or used for backfill. With this almost inexhaustible slag deposit, Morocco has a valuable resource thanks to its high content of silicates, lime and metal oxides. This has led to the attempt to valorize it in the manufacture of paving …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 12–27 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Floral System Act as a Reservoir for Nanobiotechnology (Silver Nanoparticles)
Abstract: The coming era of Nanotechnology is considered the first book on the topic of nanotechnology. It consists of processing of separation, consolidation and deformation of materials by one atom or by one molecule. There are two main approaches used in nanotechnology such as 1) “bottom-up” approach in which materials or devices are built from components and assemble themselves chemically by the principles of molecular recognition 2) “top-down” approach reflects the …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 5–7 Read article
-
Low Temperature Chemical Synthesis of Nickel Oxide Microflower and Study of its Optical and Thermal Properties
Abstract: A simple rout for the synthesis of flower like nickel oxide nanostructure has been reported using nickel sulphate and potassium per-sulphate as precursor. Efforts were made to see the effect of persulfate amount on different properties of the materials thus two samples were synthesized with different amount of per-sulphate precursors. The as prepared samples were characterized by x-ray diffraction, field emission scanning and transmission electron microscope, thermal gravimetric and differential …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 2, 2018 · pp. 17–24 Read article
-
Synthesis of Silica Nanoparticles using Sodium Silicate Solution by Sol Gel Method
Abstract: The most commonly used route for synthesizing silica nanoparticles is sol-gel method due to its ability to produce monodispersed with narrow-size distribution nanoparticles at mild conditions. Recent advances in the sol-gel process for synthesis of monodispersed, narrow-size distribution nanoparticles have boosted the development of silica-polymer nanocomposites significantly. The focus of this research is on the synthesis of silica nanoparticles, size-dependent property characterization, and surface modification for the creation of homogenous …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 1, 2021 · pp. 28–31 Read article
-
Synthesis of Zero Valent Silver Nanoparticles by Chemical Reduction Method and its Application
Abstract: Chemical synthesis is one of the commonly used method for nanoparticles synthesis. Different chemicals acts as reducing agents which converts chemical precursor into its nano form. There are various chemical methods for the synthesis of zero valent silver nanoparticles. The silver nitrate is commonly used as precursor, sodium borohydride acts as reducing agent while sodium dodecyl sulphate stabilizes the formation of nanoparticles. The formation of silver nanoparticles was characterized by …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 8–17 Read article
-
Thermal and structural properties of surface treated ragweed fiber reinforced biodegradable polylactic acid biocomposites
Abstract: Natural fiber-reinforced composites (NFRC) are becoming more popular as technological advance recognizes the need for eco-friendly materials. This work presents Giant ragweed (Ambrosia trifida) as a new composite reinforcement material into polylactic acid (PLA) matrix to form novel natural fiber-reinforced composites. Different types of retting techniques are utilized, and hydrogen peroxide retting is proven to provide the most optimized properties. The fibers are taken through subsequent extraction and grinding processes. …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 2, 2022 · pp. 13–31 Read article
-
Plant-drive Waste Fiber Reinforced Thermoplastic Composites: Modification of Fiber Surface Treatment
Abstract: Plant fibers are being utilized more frequently to create polymer composite parts for the aerospace, construction, and automotive industries. The increased awareness of the toxicity of synthetic fibers is what has caused a rise in the use of plant fibers across a variety of industries. It is crucial to emphasize that "Earth needs humans, not humans need earth," hence decision-makers and researchers are working to replace conventional materials with eco-friendly …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 14–23 Read article
-
Assessment of Polymer Nanocomposite for Packaging Uses and Concerns about Environmental and Health Effects
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions in the nanoscale range. When material dimensions are lowered to the nanoscale, phase interfaces are created, and they are essential for enhancing the material's characteristics. The surface area to volume ratio of the reinforced material used to create nanocomposites has a direct bearing on how structure and property relate to one another. Due to …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 10–36 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Development of Fly Ash Bricks Using Alccofine as Partial Replacement of Cement
Abstract: With the growing technology in bricks industry and urbanization there is lot of requirements of raw material. Due to the limited availability of non-renewable resources, it is imperative to use additional waste materials when producing bricks in order to protect these resources. To combat the problem of environmental contamination, waste materials like fly ash, silica fume, and blast furnace slag can be utilised in place of clay. So using fly …
Published in International Journal of Composite Materials and Matrices · Vol. 8, Issue 2, 2022 · pp. 19–26 Read article
-
MODELLING OF SAW PARAMETERS AND ITS MECHANICAL PROPERTIES FOR JOINING STRUCTURAL STEELS
Abstract: Ethiopia nearly 85 per cent of people is morality depends on agriculture; the government of Ethiopia emphasis on Farm Mechanization for bringing the improvement in crop production using modern equipment and tools. However, the Modern equipment development needs improved machineries for fabrication. Moreover, the metal joining technology; like Submerged Arc Welding (SAW) available is very advance and made welding of thicker plats and welded structures. Therefore, while using this modern …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 34–43 Read article
-
Experimental Investigation of Visco-Elastic Behavior for Ecovio F Film C2203 Biopolymer Melts
Abstract: The visco-elastic behavior of biopolymers fluid are significantly interested in their internal structure, thus, it has been experimentally investigated for various industrial applications. This paper studies the characterization of (Ecovio F Film C2203) biopolymer because of their characteristics and importance in different fields of environment and health. Two form of rheometers instruments have been used at temperatures between (140 - 220) ˚C to describe the visco-elastic behavior of (Ecovio F …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 24–33 Read article
-
Studies on Effect of Organoclay and Melamine Powder on Flexible Polyurethane Foam for Aerospace Applications
Abstract: Flexible polyurethane foam (PU) is a suitable candidate for various aerospace applications like acoustic insulation due to its high flexibility, ease of processing, etc. But one of the major disadvantages of this foam is low flammability resistance. The aim of this study is to improve the flame resistant properties of flexible PU foam through incorporation of additives. Flexible polyurethane foams were synthesized through one shot process with organically modified nanoclay …
Published in International Journal of Polymer Science and Engineering · Vol. 7, Issue 2, 2021 · pp. 15–26 Read article
-
A Literature Review on the Mechanical Properties of Banana Fiber Reinforced Polymer Composites
Abstract: The usage of composite materials and environmental contamination, as well as the utilization of renewable and biodegradable resources, are closely intertwined in today's rapidly developing world. An environmental researcher is hunting for sustainable materials. The forms and sizes of both natural and synthetic fibers are diverse. Researchers, engineers, and scientists have recently become interested in natural fibers as an alternative reinforcement for fiber-reinforced polymer composites. They are used to replace …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
Evaluation of Adsorption Isotherm Parameters on Corrosion Rate of Metal using Water-Based Extracts as an Inhibitor in Acidic Medium
Abstract: The research showcases the evaluation of MCS metal corrosion rate in terms of the effect of temperature and adsorption isotherm parameters monitored using water-based extracts with the aim to predict the Gibb’s free energy characteristics on inhibition integrity of the metal sample in acidic medium of 1.0M of HCl The water-based extract used are Selaginella myosurus, SM and Pneumatopter is pennigera, GF and the inhibition performance with respect to temperature …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 1, 2023 · pp. 14–25 Read article
-
Experimental Analysis and Effect of Fiber Surface Modifications on the Properties of Plant-Drive Fiber Reinforced Polymer Composites
Abstract: Global challenges of today center on ways to combat global warming while reducing the rate at which fossil fuels are depleted through the use of environmentally friendly, biodegradable products. This work envisions the use of vetiver fiber (VF) as a reinforcement material in composite material construction, since the scientific literature advocates alternative materials for plastics. Based on the fiber composition of the fibers, the effects of various chemical treatments on …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 46–57 Read article
-
Parameter Optimization of Electro Discharge Machining of AISI P20 Steel Material
Abstract: In this paper, the cutting of P20 Steel material using electro discharge machining (EDM) with a copper electrode by applying Taguchi methodology has been reported. The Taguchi method is used to formulate the experimental layout, to analyze the effect of each parameter on the machining characteristics, and to predict the optimal choice for each EDM parameter for example peak current, gap voltage, duty cycle and pulse on time. It is …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 2, 2017 · pp. 7–16 Read article