Search
458 articles for “concentration”
-
Equilibrium and kinetic studies on reactive extraction of lactic acid
Abstract: Abstract: Lactic acid has became a growing requirement in various fields so reactive extraction has been employed to recover by using tri pentyl amine and tertiary butyl amine in different diluents (1-octanol, chloroform and dimethylene chloride). Physical and chemical equilibrium isotherms, KD, loading ratio (Z) were measured through equilibrium studies for (1:1) and (2:1) acid amine complex formation at room temperature. By conducting kinetic studies in batch type reactive system …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 2, 2018 · pp. 35–46 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Development of Momentum Transfer and Kinetic Model for Hydrocarbon Degradation in a Flowing Stream
Abstract: ABSTRACTA momentum transfer and kinetic model for prediction of individual hydrocarbon degradation in a flowing stream system has been developed in this study. This model was developed to monitor, predict and simulate degradation of individual hydrocarbon in most flowing streams in the Niger Delta region of Nigeria. The model was developed from first principle using plug flow reactor concept. It was simulated with MATLAB R2007b software using data of crude …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 17–34 Read article
-
Extraction of Bioflavonoid from Peel of Citrus sinensis
Abstract: Citrus sinensis is belongs to the Rutaceae family. This is also known as orange fruit and it contains several phytochemicals like phenolic compounds, phenolic acids, bioflavonoids (quercetin, rutin and kaempferol), saponins, carotenoids, citric acid and vitamin C (ascorbic acid). It shows various pharmacological activities like antioxidant activity, anti-inflammatory activity, anti-diabetic activity, anti-cancer activity, wound healing activity etc. This plant control the various disorders in the society. Bioflavonoids also assist in …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 1, 2021 · pp. 1–5 Read article
-
Mass Production and Isolation of Trichoderma harzianum from Different Media Using Liquid and Solid Fermentation Technique and Evolution against Fusarium oxysporum
Abstract: Mycelial growth conidal production and biomass yield of trichoderma species (Trichoderma harzianum) were examined on different culture media including potato dextrose media, waksman media, soyabean meal media, glucose peptone media, jaggery media, malt extract media, cornmeal media, czepaks media. A big factor in growth rate was the medium. The optimum medium in terms of growth spore generation and biomass output was soyabean meal media. For mycelial growth, biomass output, and …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 1, 2022 · pp. 27–37 Read article
-
Potato Starch-Based Polyethylene Composite: Fabrication and Evaluation
Abstract: This study's objective was to create and evaluate a biodegradable polymer composite consisting of potato starch (PS) and low-density polyethylene (LDPE). The effects of changing the PS content (10– 40 wt%) on the mechanical (elongation at break and tensile modulus), thermal (heat conductivity), and biodegradability characteristics of the polymer composite were examined. Next, it was examined how the cross-linking agent influenced the polymer composite's mechanical and thermal properties. The melt …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 32–44 Read article
-
Chemical Analysis of Ground Water Quality in Jaipur for Multi Purposes
Abstract: Jaipur's groundwater quality is steadily declining as a result of the city's growing development and modernization. The present study's assessment of the water quality is restricted to the principal ions' concentrations, distributions, relative abundances, and patterns of changeability in the chemistry of the groundwater. An evaluation of groundwater for domestic usage is made based on the chemicals present in the water. 22 ground water samples from Jaipur, Rajasthan, were collected …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 1, 2023 · pp. 40–44 Read article
-
Studies on Mass and Momentum Transfer at the Outer Wall of a Circular Conduit with Entry Region Spiral Tape Wound on Rod as Turbulence Promoter in Homogeneous Flow
Abstract: In this study, an experimental investigation is carried out for augmentation of mass transfer coefficients in homogeneous flow by inserting spiral tape wound on rod in a circular conduit. Mass transfer coefficients are evaluated from the limiting current densities and the concentrations of the reacting ions. The variables studied are the geometric parameters of the promoter width, height, pitch of the promoter and the flow rate of the electrolyte, each …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 41–62 Read article
-
Case Studies On Synthesis Of PLLA Bioplastic Starting From Food And Agricultural Wastes
Abstract: Polylaevo Lactic Acid (PLLA) is an excellent biopolymer that is biodegradable and has characteristics exactly similar to polystyrene. However, at present, the market price of this biopolymer is significantly higher than polystyrene and other synthetic plastics. The major hindrances to the large scale manufacture of this polymer are the lack of availability of a cheap raw material and the overall economy of synthesis of lactic acid from the same. In …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 1–13 Read article
-
Effect of Environmental Parameters on Metal Corrosion in Soil Using Finite Element Method
Abstract: Deterioration of buried metal due to corrosive soil environment is a major issue worldwide. Although failure of buried metal due to corrosive soil is an old problem, yet such failures are still uncontrollable even with the application of advanced corrosion protection technologies. Therefore, understanding environmental parameters causing corrosion of buried metals are necessary. This research work reviews environmental parameters causing corrosion of buried metal in soils. These functional parameters include: …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 1, 2020 · pp. 1–13 Read article
-
Iron Pillared Clay for Sorption of Toluene in Aqueous Solution: Kinetics and Equilibrium Studies
Abstract: The adsorption of toluene using unmodified and Fe-pillared clay were investigated in this study using UV/Visible, FT-IR spectroscopic measurements and batch adsorption process. The framework vibration of the clay before and after pillaring were determined using FTIR spectra. Effect of Contact time and initial and various concentration of toluene at constant temperature were investigated. The experimental data were studied using equilibrium isotherm (Langmuir and Freundlich) and kinetics models (pseudo first …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 1–10 Read article
-
Air Pollution – Its Effects on Health and Environment
Abstract: Air pollution can harm us when it accumulates in the air in high enough concentrations. Millions of Americans live in areas where urban smog, particle pollution, and toxic pollutants pose serious health concerns. People exposed to high enough levels of certain air pollutants may experience Irritation of the eyes, nose, and throat, wheezing, coughing, chest tightness, and breathing difficulties, Worsening of existing lung and heart problems, such as asthma and …
Published in International Journal of Environmental Chemistry · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
Characterization of Tesu Colour Dyeing on Excel Fibre and to Study the Effects of Caustic Treatment
Abstract: Tesu, the natural flower colour, was extracted in such way that the maximum colour yield can be obtained on textile fibre. The extracted Tesu colour was applied on excel, the third generation regenerated cellulosic fibre, at different pH, time, temperature and electrolyte concentration. The characterisation of Tesu colour dyeing on excel fibre was developed. Further, the effects of caustic soda treatment on dyeability of excel fibre with natural Tesu colour …
Published in International Journal of Environmental Chemistry · Vol. 2, Issue 1, 2016 · pp. 20–25 Read article
-
Application of Acid Treated Carbon Derived from Biomass (Lantana camara) for Removal of Phenol from Aqueous Solutions
Abstract: The presence of phenolic compounds is toxic and harmful to human health and aquatic life. Five biomass: cotton stalk, rice straw, bagasse, wheat straw and Lantana camara were characterized. Based on characterization and availability, Lantana camara (LC) was selected for study as an adsorbent. LC and activated Lantana camara (ALC) were further characterized and studied for their suitability as the commercial adsorbent for removal of phenol. Equilibrium study on ALC …
Published in International Journal of Environmental Chemistry · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
Modeling the Diffusion Characteristics of Sawdust in Crude Oil Medium
Abstract: Over the years, oil spill pollution has become an important issue of concern due to its serious environmental impact; Therefore natural organic sorbent such as Abura sawdust was used for oil spill cleanup due to its availability, eco-friendliness and low cost, and was selected as the preferred sorbent and the effects of sorbent contact time and its particle size on oil adsorption capacity were evaluated for the systems of dry …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 1, 2018 · pp. 44–57 Read article
-
Nanocoating and Electrospraying Techniques Used for Corrosion Mitigation of Aluminum in Nitrogen dioxide Environment
Abstract: Nitrogen gas absorbs moist air to produce nitric acid. It develops acidic medium for aluminum. It forms a corrosion cell on the surface of aluminum. The formation of corrosion cell is written as: Al|Al+3||H+|H2 thus Corrosion reactions accelerate on aluminum surface and Al is oxidized into Al+3 and the H+ ions is reduced into H2. This acid produces various forms of corrosion in aluminum like galvanic, pitting, stress, crevice, blistering, …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 2, 2020 · pp. 20–31 Read article
-
Pitaya Cactus Endophytic Bacteria a Sustainable Option to Reduce and Optimize NH4NO3 in Phaseolus vulgaris
Abstract: The Phaseolus vulgaris crop demands nitrogen fertilizer as NH4NO3 for healthy growth. However, the application of NH4NO3 not uptaken by plant roots, generates N2O, a gas that contributes to the greenhouse effect besides loss of soil fertility; a sustainable option is to reduce up to 50% and to optimize it by inoculating P. vulgaris seeds with genera and species of plant growth promoting endophytic bacteria isolated from a desert xerophyte …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 2, 2022 · pp. 34–42 Read article
-
Synthesis of Zeolites: An Overview
Abstract: Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents and catalysts. Zeolite synthesized from CFA is a minor but interesting product, with high environmental applications. Zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. This paper provides an overview on the methodologies for zeolite synthesis from CFA, and a detailed description of conventional alkaline conversion processes, with special emphasis on the experimental conditions to …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 8–14 Read article
-
The new method of purification of the industrial waste waters
Abstract: The main problem in the all existing electrofloatation methods of cleaning is the increase of the alkalization space near the cathode that leads to formation of the salts sediments on the cathode as a result of passing of the electric current through the water environment. The salts so tightly cover cathode’s surface that can cause the total curtailment of the process of electrofloatation. This can be explained by the fact …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 4, Issue 1, 2018 · pp. 34–44 Read article
-
Several Phases of Binary Liquid Mixture
Abstract: The system’s overall composition, heat, and stress can all be changed independently. Instead of using parameters like the coordinates of a three-dimensional phase diagram, we often generate a twodimensional phase transformation that is either a thermal diagram at a specified pressure or its composition graph at a fixed temperature. The location of the system points on one of these diagrams correlates to a certain heat, stress, and normal phenomenon. As …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 8, Issue 1, 2022 · pp. 30–34 Read article