Search
688 articles for “strength”
-
An Advanced Nanomaterials Production in Microgravity
Abstract: Nanomaterials are matrices, containing nano sized particles. The presence of nanoparticles in the matrix leads to a sharp change in the properties of the resulting nanomaterial for the better, including mechanical strength, impact strength, electrical or thermal conductivity. Today, nanocomposites are obtained by laser decomposition of an aerosol solution of ferrocene in toluene, which results in the formation of a nanocomposite containing amorphous carbon nanoparticles and isolated iron-based nanoparticles in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 30–34 Read article
-
Influence of Concentration Variation of Chemical Pre Treatments on Tensile Properties of Coir Fibre Reinforced Composites
Abstract: Composite material consisting randomly oriented coir fibres and epoxy resin have been studied. This study tends to analyze the tensile properties of coir fibre (10mm length) reinforced with epoxy resin by treating with Na0H and KMn04 of different concentrations. Fibers are bonded together with epoxy resin by hand layup process and cured at room temperature for 24 hours to form composite. Different tensile properties of composite were investigated in accordance …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 13–20 Read article
-
Physico-mechanical, and Biodegradation Properties of Polyethylene/Food Polysaccharide Blends
Abstract: Hydrophilic/polar and hydrophobic/non-polar materials do not blend well, which causes issues in the production of biodegradable plastic. Plasticizer (glycerol) was one of the components added to the mixture to increase compatibility between the two materials; this also made the film less brittle. The purpose of this study is to look at how different food polysaccharide contents affect the physico-mechanical, and biodegradation characteristics of novel polymeric-based bio-composite films made from low-density …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 1, 2023 · pp. 1–13 Read article
-
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
Abstract: Al–Mg base composites reinforced with different mixtures of nano-Al2O3 particles have been fabricated by mechanical stir casting and their metallurgical and mechanical characterization has been investigated. In this investigation, the Al2O3 particulates were reinforced into the base matrix of aluminium fabricated with five levels of volume fraction such as Al/0 vol.% Al2O3, Al/2 vol.% Al2O3, Al/4 vol.% Al2O3, Al/6 vol.% Al2O3 and Al/8 vol.% Al2O3. After the Al-base-nano-composites were fabricated …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 28–34 Read article
-
Sensing Capabilities of Fiber Reinforced Polymer (FRP) Composite Integrated With Electrical Inserts
Abstract: This paper describes the attempts made in developing a passive smart material by the integration of electrical inserts in the FRP components and studying the electrical & mechanical behavior under different loading conditions. FRPs are fabricated with copper inserts and are tested to study the resistive and capacitive behaviors of prepared specimens. FRP components are also tested for tensile, bending, compression and impact strengths to determine the effect of metal …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 2, 2015 · pp. 28–33 Read article
-
A Mini Review on Properties and Application of Composite Materials
Abstract: This study demonstrates the need of composite materials over common materials. Using different molding methods, composite components are manufactured in different sectors. The primary advantage of composite is lightweight, relative stiffness and strength properties. The key concepts of composites are its physical properties, material properties, tooling, design, inspection and repair. Military vehicles, such as airplanes, helicopters, and rockets, placed a premium on high-strength, light-weight materials. While the metallic components that …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
An Overview of Ceramic Matrix Composite
Abstract: Ceramic materials often exhibit a combination of useful physical and mechanical properties, including high refractoriness, but their applications are restricted due to their brittle behaviour; in an attempt to improve the strength, and particularly the toughness, of brittle ceramics particle-strengthening and fibre-reinforcement have been utilized, with limited success. The factors which affect the mechanical properties of these composite systems are discussed, and the various experimental systems that have been investigated …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 23–26 Read article
-
Market Assessment of Polymer Matrix Composites
Abstract: Polymeric composition compound with a plasticizer or very low proportion of pigment or processing aids are nonordinary consider as a composition the goal is to improve strength stiffness or toughness or dimensional stability by embedding particles in matrix or binding phase. Polymer-matrix composites are valued in the aerospace industry for their stiffness, lightness, and heat resistance. They are fabricated materials in which carbon or hydrocarbon fibres (and sometimes metallic strands, …
Published in International Journal of Composite Materials and Matrices · Vol. 3, Issue 1, 2017 · pp. 16–22 Read article
-
Fabrication and characterization of Aluminum-Granite-Graphite Metal Matrix Composite
Abstract: Moving machine elements are constantly subjected to wear and tear. Machine life can be improved by using hard and wear resistant materials. Most of machine elements are made of metals or alloys. These materials alone cannot meet the requirements of design of long-life machines. Naturally occurring hard materials lack the strength to withstand the machine loads. Composite materials provide the solution to such requirements. Based on requirement, a composite material …
Published in International Journal of Composite Materials and Matrices · Vol. 6, Issue 2, 2020 · pp. 20–30 Read article
-
Effect of Coupling Agent on Organoclay Dispersion in Polyethylene/Organoclay Nanocomposites for Packaging Industry
Abstract: Low-density polyethylene (LDPE) is one of the most widely used polymers in various fields, but due to the hydrophobic nature of LDPE, it is hard to prepare an LDPE/clay nanocomposite. In this article, an LDPE/organoclay nanocomposite, which can be used in the packaging industry, was prepared by melt-blending organoclay with a polymer matrix (LDPE) and compatibilizer, low molecular weight oxidized polyethylene. The influences of organoclay, and compatibilizer during melt mixing …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 1–11 Read article
-
Flexural Properties of Vetiver Fiber Reinforced Polyethylene Composite are Affected by Processing Parameters
Abstract: Fiber reinforced polymer composites have long been influential in a variety of applications due to their great particular strength and modulus. Vetiver fiber (VF)/thermoplastic composites are an alternative material for solving the environmental pollution problem related to synthetic polymers. The benefits of natural fibers (such as coir, jute, vetiver, calotropis gigantea, flax, hemp, kenaf, etc.) over traditional reinforcing fibers (glass and carbon fiber) are their easy obtainability, renewability, non-corrosive nature, …
Published in International Journal of Composite Materials and Matrices · Vol. 9, Issue 1, 2023 · pp. 12–20 Read article
-
EFFECT OF HEAT AGEING ON MECHANICAL PROPERTIES OF POLYAMIDE 6(NYLON 6) & POLYAMIDE 12(NYLON 12)
Abstract: Polyamide 6 or Nylon 6(PA 6) and polyamide 12 or Nylon 12 (PA 12) are well known engineering semi-crystalline polar polymers characterized by the presence of amide linkage (-CONH-) in the repeating units of their chains. The glass transition temperature (Tg) of PA 6 and PA 12 is ~50 °C and ~37 °C respectively. PA 6 is widely used for gears and bearings, fittings in automobile industry for under hood …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 2, 2016 · pp. 1–12 Read article
-
Cords of tyres to shed hybridization
Abstract: AbstractCords of tyres have descriptive issues for mechanical stability, break at elongation strength and dimensions. Two polymer reinforced cord form has lying usage from nylon and polyester to search respects for hybridized contributed formation after form from chords. Poly(ethylene naphthalate)-in-polyester yarn or aramid-in-nylonhybrid has provisioned steel cord substitution to raise steer-in-speed at subjective low-in-weight shed. Competencies among as routed fabrics under differential twisting has almost similar break-in-twist strengths as well …
Published in International Journal of Polymer Science and Engineering · Vol. 6, Issue 2, 2020 · pp. 5–11 Read article
-
Comparative Experimental Measurement on the Fundamental Properties of Chemically Treated Natural Fibers
Abstract: Plant-derived natural fiber as a reinforcing component can play a prevalent role in the field of fiber reinforced polymer composite due to their obtainability, environmentally friendly, renewability, low- density, and low cost. Golden fiber (jute fiber)/coconut fiber can be a potential candidate to replace the synthetic fiber reinforced polymer composite. The influences of chemical treatments such as mercerization, sodium lauryl sulfate and a combination of mercerization and sodium lauryl sulfate …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 1, 2022 · pp. 34–44 Read article
-
Experimental Investigation To Study the Effect of Heat Treatment on Mechanical Properties and Microstructure of Duplex Stainless Steel
Abstract: The broad aim of this paper is to study the enhancement in mechanical properties of duplex steel by thermomechanical processing. Solution annealing followed by water quenching, hot rolling to 10% and 30%, cryo-rolling to 80% and 90% and ageing at 600°C and 1000°C for 5 hrs were the treatments given. The cryo-rolled samples were used for impact testing and rest for tensile testing. Microstructural analysis was done after the various …
Published in International Journal of Mechanics and Design · Vol. 2, Issue 2, 2016 · pp. 32–42 Read article
-
Review on the Mechanics of Lightweight 3-D Graphene Assembly
Abstract: The purpose of this paper is to improve the results of Recent advances in three-dimensional (3D) graphene assembly, it has shown how we can make solid porous materials which is lighter than air. In its two-dimensional form, graphene is thought to be the strongest of all known materials. But researchers until now have had a tough time decoding that two-dimensional strength into beneficial three-dimensional materials. It is possible that these …
Published in International Journal of Mechanics and Design · Vol. 3, Issue 1, 2017 · pp. 9–13 Read article
-
A Review on Escalation of Bike Chassis
Abstract: The body outline shapes the foundation of a vehicle; its rule work is to convey the greatest burden for all planned working circumstances securely. A vehicle's chassis is the main carriage framework. The frame serves as a framework on which items such as the gearbox and motor are placed. The bike chassis comprises of the suspension, frame, brakes and wheels. The chassis is the base which represents overall style of …
Published in International Journal of Mechanics and Design · Vol. 8, Issue 1, 2022 · pp. 1–7 Read article
-
Analysis of Physical Properties and Fabrication of Silicon Carbide, Graphite and Fly Ash Reinforced Metal Matrix Composites
Abstract: In the present study, a modest effort has been made to produce aluminium based silicon carbide particulate MMCs with an objective to develop a conventional low-cost method of producing MMCs and to acquire homogenous dispersion of ceramic material. To achieve these objectives step-mixing method of stir casting technique has been adopted and subsequent property analysis is performed. Al 6351 has been reinforced by silicon carbide, graphite and fly ash material, …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 1, 2017 · pp. 16–21 Read article
-
Selection of Gear Materials Using MCDM-TOPSIS Approach
Abstract: Materials selection are a key issue in the optimal design of the industrial product. Material selection is a difficult and subtle task because of an immense number of different available materials. Increasing demand for gears in the different field of applications has forced manufacturers to design and develop gears which compete in the global market and satisfy the user requirements as well as environmental conditions. Various attributes of gear materials …
Published in International Journal of Manufacturing and Materials Processing · Vol. 3, Issue 2, 2017 · pp. 10–15 Read article
-
Multi-objective Optimization of Weld Bead Geometry of Micro-plasma Arc Welded Titanium (Ti–6Al–4V) Alloy Sheets Using TOPSIS
Abstract: Titanium alloys are used in the manufacturing of aero engine components for their attractive, combined properties such as lightness, good strength-to-density ratio, corrosion resistance. In the present paper, titanium (Ti–6Al–4V) alloy sheets are butt welded using micro-plasma arc welding. Peak current, base current, pulse rate, and pulse width are considered as weld input parameters and weld bead geometry parameters, namely front width, back width, front height, back height, are considered …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 37–48 Read article