Search
50 articles for “Dielectric”
-
Employing ML and DL to Optimize an ElectrochemicalBiosensor
Abstract: A major field of study in science, that have made the understanding of the world and made homo sapiensthe dominant species on the planet is our understanding of medicine. Under this vast umbrella is thedetection and classification of microorganisms. Electrochemical biosensors have emerged aspromising tools in this regard due to their high sensitivity, selectivity, and potential for miniaturization.By integrating a Machine Learning & Deep Learning model for the detection of …
Published in International Journal of Chemical Separation Technology · Vol. 10, Issue 1, 2024 · pp. 33–38 Read article
-
Production of Compositionally Modulated Nanolayer Zn–Ni Alloy Coatings and Their Corrosion Behaviours
Abstract: Compositionally modulated nanolayer alloy (CNA) coatings of Zn–Ni having alternatively the same compositions have been developed galvanostatically on mild steel from single bath technique (SBT) using square current pulses. Sulphanilic acid and citric acid (CA) were used as additives. Modulation in the composition of alloys were introduced by passing a different switched cathode current densities (SCCD’S) using sophisticated power sources. Variety of CNA coatings was developed under different conditions of …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 1–8 Read article
-
Experimental Studies on the Surface-Driven Capillary Flow of Water in Pristine and Processed Microfluidic Devices Fabricated by PMMA
Abstract: In this work, air dielectric barrier discharge (DBD) plasma processing on pristine polymethylmethacrylate (PMMA) flat surface is the chosen surface modification technique to vary the surface wettability creating a difference in microfluidic speed of dyed water. Straight microchannel of uniform width, microchannel with integrated micropillars on bottom wall, and microchannel bend are the proposed designs of PMMA microfluidic devices in this work. Each microfluidic flow of dyed water is recorded …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 1, 2018 · pp. 33–38 Read article
-
Aerogel from Ceramic Composite
Abstract: This article is written from conferred articulated forms of aerogel. Sol-gel is a usual method toprepare aerogel. Compromise of inherent fragile mater under extensive moisture absorption tendencyof silica network has mitigated after inclusive of polyhedral oligomeric silsesquioxane (POSS)molecule. Long term applicability of silica aerogel has cited to confer superhydrophobic and flexibleconfigure based on synthesis by the catalysed sol-gel process; in accord of usual two-step method ofacid activation followed by basic …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 7, Issue 1, 2021 · pp. 1–12 Read article
-
Kinetics of oxidation of mixture of oxalic acid and glutaric acid by chromic acid in presence of sodium chloride and potassium chloride
Abstract: Effect of Sodium Chloride and Potassium chloride on the co-oxidation of oxalic Acid and glutaric Acid by Chromic Acid has been studied. The products are carbonyl di carboxylic Acid and Carbon dioxide. The rate of oxidation decreases with the increase in the concentration of Sodium Chloride and Potassium Chloride. It is found that Potassium Chloride is the most effective in retarding the reaction rate comparison to Sodium Chloride. The order …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 2, 2019 · pp. 4–8 Read article
-
Review of Silicon Reactivity of Self-assembled monolayer and its Properties
Abstract: In most cases, the assumption of perfect high viscosity between silicon and silver underlies the modelization of silicene on Ag(111). According to recent reports, growth does not take place on top of the Ag(111) terraces, but rather within the first layer of them. In this article, we present the results of a study that combines scanning tunnelling microscopy and density functional theory to simulate the nucleation process and reveal the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 29–33 Read article
-
A Comparative Analysis of a Single Feed Circularly Polarized Micro-strip Patch Antenna with U-Slot & L-Slot
Abstract: This paper compares the different parameters for a single feed circularly polarized Micro-strip patch antenna with U-slot and L-slot. The proposed antenna 1 contains a U-Slot and designed with DGS technique to reduce the size of antenna and proposed antenna 2 contains a L-slot and designed with DGS technique to reduce the size of antenna. The antenna with L-slot is designed on a high dielectric constant (εr = 10.2) substrate …
Published in International Journal of Broadband Cellular Communication · Vol. 1, Issue 1, 2015 · pp. 6–11 Read article
-
Antenna for S-Band Application Utilizing Flexible Material
Abstract: ABSTRACT In this article, antenna for S-band application has been simulated for the frequency range of 3.5 to 8.5 GHz. CST software is utilized to design the anticipated antenna with materials which have a dielectric constant of 1.7. The return loss of bending antenna is -20 dB at 5.89 GHz resonant frequency. It covers the bandwidth from 3.87 GHz to 8.07 GHz which is approximately 70%. In this proposed antenna, …
Published in International Journal of Broadband Cellular Communication · Vol. 5, Issue 1, 2019 · pp. 1–4 Read article
-
DESIGN OF TRUNCATED SQUARE MICROSTRIP ARRAY ANTENNA FOR ENERGY HARVESTING
Abstract: ABSTRACTAn 2X2 array of truncated square microstrip antenna is proposed in this paper. Antenna is designed for energy harvesting. This proposed antenna has a bandwidth for VSWR < 2 from 2.36 to 2.58GHz. A single antenna was designed initially at 2.4GHz, then array of the antenna was designed with the same frequency and results were compared. Four truncated antennas were used in the designing of the proposed antenna, microstrip feed …
Published in International Journal of Broadband Cellular Communication · Vol. 5, Issue 2, 2019 · pp. 10–16 Read article
-
A Novel Design of Multiple Band H – Shape Slot Antenna For Radar Communication
Abstract: A compact multiple band patch feed H–shape slot antenna for RADAR application is designed and presented in this paper. The proposed H - shaped slot antenna is built on a FR4 substrate with a length of 32.248 mm and dielectric constant of 4.4, thickness of 3.432 mm, width of 36.51 mm and loss tangent of 0.018. The proposed antenna is designed over a frequency range of 1.0 to 8.0 GHz. …
Published in International Journal of Digital Communication and Analog Signals · Vol. 1, Issue 1, 2015 · pp. 29–35 Read article
-
A Novel Leaf Antenna Design for Ultra-Wideband Applications
Abstract: A novel printed leaf structured antenna for ultra-wideband (UWB) applications is designed in HFSS software, obtained results are presented. The radiating surface is cut like leaf shape over FR4 dielectric substrate backed finite ground plane and power is supplied with a 50 Ω microstrip line. The designed antenna operates over impedance bandwidth (2.9–11.6 GHz) for return loss S11 < 10 dB. The antenna also shows omni-directional radiation patterns and good …
Published in International Journal of Microwave Engineering and Technology · Vol. 1, Issue 2, 2015 · pp. 20–24 Read article
-
Broadbanding of Circular Patch Antenna Using Stub Loaded Stacked Configuration
Abstract: This paper proposes a stub loaded stacked configuration of a circular patch antenna using FR-4 material as a substrate with dielectric constant of 4.2 for resonant frequency of 2 GHz. This configuration is a hybrid of two broadbanding technique, the stub loading technique and stacking technique. The radius of the patch is calculated to be 18.88 mm and the air gap is 1 mm between the lower and upper layer. …
Published in International Journal of Microwave Engineering and Technology · Vol. 2, Issue 1, 2016 · pp. 20–25 Read article
-
Simulation of Pyramidal Structures Of Coco Peat and Coconut Shell Activated Carbon as Radar Absorbing Material
Abstract: Shape is the main parameters that affect the performance of the pyramidal microwave absorber. The pyramidal shape is mostly installed in the anechoic chamber. But the shapes of these pyramidal structures are very large. The aim is to design a structure of pyramidal absorber with different materials and with low height to achieve maximum absorption. In this paper, we have investigated the different structures of the pyramidal absorber and simulate …
Published in International Journal of Microwave Engineering and Technology · Vol. 2, Issue 2, 2016 · pp. 1–6 Read article
-
DOUBLE U-SLOTTED CIRCULARLY POLARIZED MICROSTRIP ANTENNA WITH DEFECTED GROUND STRUCTURE
Abstract: Double U-slot truncated patch antenna is designs and simulates frequency in microstrip patch antenna using Defected ground structures with co-axial feeding. This paper presents a circular polarized (CP) Double U-slot microstrip antenna with single band for wireless communications system application which is suitable for the 2.35 GHz single-band operations. Antenna design in double U-slot truncated patch in Defected ground structure. The proposed antenna designed on FR-4(lossy) with dielectric constant of …
Published in International Journal of Microwave Engineering and Technology · Vol. 3, Issue 2, 2017 · pp. 14–18 Read article
-
Design a Compact Microstrip Patch Antenna on a Center Frequency of GSM Band with DGS for Gain Enhancement
Abstract: In this paper, a compact dual band microstrip patch antenna has been designed on a center frequency of GSM band (800–900 MHz) and (1800–1900 MHz) using the DGS technique. The resonating frequency of this antenna 0.845 and 1.850 GHz, the proposed antenna is designed on an FR4 lossy substrate with dielectric constant 4.3, thickness 1.6 mm and loss tangent 0.02. The main objective of this paper is to increase the …
Published in International Journal of Microwave Engineering and Technology · Vol. 3, Issue 2, 2017 · pp. 1–6 Read article
-
A Wideband 3dB Hybrid Coupler for Operations in the C-band
Abstract: This study proposes and describes a novel wideband 3 dB directional coupler operating in the C-band (4–8 GHz). The proposed design was developed using microstrip technology with alumina being used as the dielectric, with a bandwidth of approximately 7 GHz (2–9 GHz), making it in theory, suitable for applications in the X-band (8–12 GHz) and L-band (1–2 GHz) as well. The increase in operational bandwidth was obtained by utilizing two …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 15–18 Read article
-
Design, Fabrication and Analyses of Rectangular Microstrip Inset Feed Patch Antenna at 2.4 GHz
Abstract: Low profile antenna supports the activity of numerous modernized communication systems. Microstrip patch antenna represents a group of antenna which offers the capability of complete assimilation with communication system printed circuitry. We have been devised, fabricated a rectangular microstrip patch antenna and analyzed at the frequency of 2.4 GHz. By means of transmission line model it has been effectively demonstrated as to how the patch antenna can accurately modelled and …
Published in International Journal of Microwave Engineering and Technology · Vol. 4, Issue 2, 2018 · pp. 19–26 Read article
-
Design and Analysis of Broadband Flexible Antenna for Remote System
Abstract: ABSTRACT In this anticipated antenna, jeans have been utilized as a substrate. The dielectric constant of substrate is 1.7 and patch has been made by copper tape. The benefits of jeans are long wearing, simple consideration attire, and cost effective. This anticipated antenna provides gain of 3.592 dBi at 5.27 GHz. In this paper, the analysis has been focused on S11, radiation pattern, directivity and polar plot. Keywords: Jeans, microstrip …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 1, 2019 · pp. 19–23 Read article
-
Combination of Triangular and Semi Circular Microstrip Patch Wideband Antenna for Wireless Application
Abstract: ABSTRACTThe combination of triangular and semi-circular wideband dipole antenna with single feed line is proposed for wireless application. The proposed antenna consists of Arrow shaped patch antenna operating at the wideband frequency of 1.6305GHz-3GHz. In this antenna material used for designing is FR-epoxy, height of the substrate is h=1.6mm. Dielectric substrate and relative permittivity are =4.3, tanδ=0.02. Keywords: Dipole antenna, Microstrip patch antenna, Wideband antenna.Cite this Article: Sandeep Barua, Combination …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 2, 2019 · pp. 8–12 Read article
-
Design and Analysis of Microstrip Filtenna for 2.4 GHz Applications and Measurement of SAR over Human Head Model
Abstract: ABSTRACTMultifunctional ability of modern devices leads to wideband frequency characteristics. A microstrip antenna is a considerable narrowband antenna and a method to increase its bandwidth as well as adding filtering property is studied. In this study models are developed for 2.4 GHz band applications using filtering antenna concept that increases the bandwidth of the antenna and allows it to work as a filter to improve its frequency selectivity. In the …
Published in International Journal of Microwave Engineering and Technology · Vol. 5, Issue 2, 2019 · pp. 30–42 Read article