Search
124 articles for “E-glass”
-
Leakage-Free Microfluidic Flow of the Dyed Aqueous Ethanol in a single SU-8 based Glass Microfluidic Device Fabricated by the Selected Microfabrication Technologies
Abstract: In this work, a single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven microfluidic flow. Dyed aqueous ethanol (80% dyed water, 20% ethanol) is prepared to be used as working liquid. A surface-driven microfluidic flow of the prepared working liquid is …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 2, 2018 · pp. 13–17 Read article
-
Analytical Study of Ceramic Compositions: Lamination and Fracture Toughness
Abstract: This study investigates the characteristics and fabrication techniques of laminated ceramic composites, focusing on various glass-ceramic systems, including alumina, BaTiO3/Al2O3, and LiO2‐ZrO2‐SiO2‐Al2O3 (LZSA). The inherent brittleness of ceramics, attributed to surface flaws and their limited toughness, necessitates the development of layered structures to enhance mechanical reliability. Layered ceramics demonstrate improved fracture toughness, crucial for applications in aerospace, biomedicine, and military armor. Techniques such as tape casting, electrophoretic deposition, and advanced …
Published in International Journal of Analytical and Applied Chemistry · Vol. 10, Issue 2, 2024 · pp. 38–44 Read article
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
Mechanical Response of Cementitious Composites Containing Alkali-Resistant Glass Fiber Reinforcement
Abstract: ABSTRACT Concrete is one of the most widely utilized construction materials because of its excellent compressive strength and long-term durability. Despite these advantages, it exhibits poor tensile strength and is prone to cracking, which can reduce its overall structural performance. To address these shortcomings, the inclusion of fibers in concrete has gained significant attention as an effective reinforcement technique. In this study, the effect of Alkali-Resistant (AR) glass fibers on …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 36–44 Read article
-
Experimental Optimization of Process Parameters for Tape Wound Composite Cylindrical Shells by using Taguchi Method
Abstract: The purpose of this paper is to design and construct laminated composite cylindrical shells. Tape wound layup method is implemented for the preparation of composite laminated shells by E-glass fiber mat and Epoxy resin as adhesive. The shells were made by considering two parameters p1-diameter of mandrel and parameter p2- stacking sequence. As per the L9 orthogonal array the required diameter and stacking sequence was arranged. The composite shells were …
Published in International Journal of Composite Materials and Matrices · Vol. 5, Issue 2, 2019 · pp. 18–26 Read article
-
Multi Criteria Optimization in Drilling Process of Glass Fibre Reinforced Polymer Using Grey Based Taguchi Analysis
Abstract: The current work uses multi-response Taguchi GRA to analyse and optimise the drilling variables for a modified glass fibre reinforced polymer (GRRP). The L27 orthogonal array design was used to carry out the experiments. The filler material used in this study is hematite ore (Fe 2 O 3 ) particles of 75-150µm, E-Glass fiber of 300 GSM, and LapoxL-12 resin has been used to fabricate the modified GFRP composite laminates. …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 6–16 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article
-
Experiments to Record the Capillary Flow of Dyed Waterin SU-8 based Glass Microfluidic Devicestowards the Fluidic Phenomena
Abstract: In this experimental work, a set of three individual leakage-free SU-8 based glass microfluidic devices are fabricated by maskless lithography and proper indirect bonding technique. Dyed water(50% distilled water, 50% red dye) is prepared and used as working liquid. The microfluidic leakage is experimentally demonstrated in other set of two leaky microfluidic devices due to improper indirect bonding technique. The effect of surface-to-volume ratio on surface-driven capillary flow of dyed …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 1, 2020 · pp. 13–19 Read article
-
Experimental Demonstration on Microfluidic-Leakage in SU-8 based Glass Devices for Applications towards the Polymer Microfluidics
Abstract: Classical mechanics and quantum mechanics belong to the first quantisation in physics. Quantummechanics is dependent on quantum theory. Quantum field theory is the second quantisation inphysics. Fluid mechanics is a branch of classical mechanics (non-quantum). Therefore, fluidmechanics is present at the first quantisation in physics. Bulk-fluidics (microfluidics), microfluidicsand nanofluidics are the three levels of fluid mechanics towards miniaturisation. In this experimentalwork, the microfluidic-leakage is prominently demonstrated by fabrication of 12 …
Published in International Journal of Analytical and Applied Chemistry · Vol. 7, Issue 1, 2021 · pp. 1–7 Read article
-
Miniature Metamaterial Antenna for Microwave Imaging Application
Abstract: The work represented in the paper proposes a miniature Metamaterial (MTM) antenna using Split Ring Resonator (SRR) for Microwave Imaging applications. This SRR is fed using a single microstrip line. For structure optimization, parametric study is exploited, which helps in obtaining impedance bandwidth over the UWB frequency range (3.1 to 9.9 GHz). Entire structure is built on a FR-4 (εr = 4.3) Glass Epoxy substrate of dimensions of 13*12*1.6 mm. …
Published in International Journal of Microwave Engineering and Technology · Vol. 6, Issue 2, 2020 · pp. 18–25 Read article
-
Mechanical characterization of Fiber glass Composites with Nano silica
Abstract: Epoxy-based fiber glass composites with enhanced strength by silica Nano particles checked for mechanical strength by addition of nanoparticles. Fiber glass Composites were prepared with glass fiber and nanoparticles containing resin, by infusion method. proper mixing of nanoparticles in resin was checked by various techniques. Viscosity of liquid resin reduced because of nanoparticles but still have good command to reinforce glass fibers. glass transition temperature (Tg) of polymer containing silica …
Published in International Journal of Chemical Separation Technology · Vol. 5, Issue 1, 2019 · pp. 49–58 Read article
-
Simulation Models for Flexural and Compressive Strength of Concrete Using Waste Glass as Partial Replacement.
Abstract: The research present the usefulness of waste glass in the production of grade 20 concrete using partial replacement levels of 0%, 20%, 40% and 60%, respectively, for coarse glass and fine glass to coarse aggregate and fine sand aggregate. The results obtained indicate that, for the purpose of construction works, 20% replacement should be adopted either for coarse glass or fine glass replacement. Simulation models were established to predict flexural …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Effect of Circular Polyimide Micropillars on Surface-Driven Capillary Flow of Dyed Working Liquids inside the SU-8 based Glass Microfluidic Devices
Abstract: In this experimental work, total 8 individual SU-8 based glass microfluidic devices are fabricated using Mukhopadhyay’s own hands-on completely. Maskless lithography and indirect bonding technique are the methods to fabricate these devices. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow in each device. Dyed water and dyed ethylene glycol are the selected and prepared …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Advanced Magnesium-Based Metallic GlassComposites for Biomedical Implant Applications: AMachine-Learning-Informed Approach
Abstract: Magnesium-based bulk metallic glasses (Mg-BMGs) combine strength, low density, and tunable degradability. Their amorphous matrix has a small plastic process zone. This zone is only about 4 μm wide. A small process zone keeps most glasses brittle. Adding a second phase is the best fix. This chapter extends Mg-BMGs to true composites. We call these Mg-based bulk metallic glass composites, or Mg- BMGCs. The chapter covers matrix engineering and interfacial …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 2, 2026 · pp. 48–65 Read article
-
Study on Torsional Behaviour of RC Flanged Beams Strengthened with Glass FRP
Abstract: Existing structures needs repair and rehabilitation due to Environmental deterioration, increased service loads, reduced capacity due to aging, deterioration owing to poor construction materials and workmanships and conditional need for seismic agitating. FRP has been used successfully in a large number of such uses for causes like low weight, high strength and durability. Many previous research works on torsional strengthening were focused on solid rectangular RC beams with different strip …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 15–21 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Innovative Concrete Composites: Assessing Mechanical Strength with Fly Ash, Glass, and Granite Waste Incorporation
Abstract: Waste management poses a significant challenge for countries in both current and future contexts. The generation of solid waste from various industries, such as stone, glass, coal, and tires, constitutes a major issue in India, leading to significant environmental and health concerns for the surrounding population. This study addresses these challenges by exploring the utilization of waste granite and glass powder as materials to replace sand and cement, respectively, with …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 37–45 Read article
-
A Study on Mechanical Properties and Fracture Behavior of Chopped Fiber Reinforced Self-Compacting Concrete
Abstract: The development of self-compacting concrete (SCC) is innovatory landmark in the history of construction industry resulting in predominant usage of SCC worldwide nowadays. It has many advantages over normal concrete in terms of enhancement in productivity, reduction in labor and overall cost, excellent finished product with excellent mechanical response and durability. Further, incorporation of fibers enhances its properties specially related to post crack behavior of SCC. Hence, the aim of …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 90–122 Read article
-
An Investigation of Physico-mechanical Characterizations of Recycled Cellulose Fiber and Glass Fiber-polypropylene Hybrid Composite
Abstract: In the field of marine engineering design, polymeric composites reinforced with natural fibers are extensively used. The results of this study demonstrate that these properties can be enhanced by adding glass fiber (GF) to recycled cellulose fiber (rCF) plastic composites. The performance of rCF and rCF/GF hybrid polypropylene (PP) composites is being studied in the current experimental effort. On the tensile behavior and impact strength of composites containing 30 wt% …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 1–10 Read article
-
Modern Ceramic Compose to Pervade Electronics
Abstract: This article composed from articles where ceramics, photonics, and allied fame schemed. Scheme of materials is studied to transduce optical, electrical, mechanical, and magnetic phenomenon. Evolution of description at nanometer level of distributing from non-degenerating phases schemed ferrite in the ferroelectric matter to subject magnetic memory contravened from/by electrostatic to electrical current preserved memory acts. Suggestive selective scriptive as from magneto-electric effect induced dielectric polarization of material under effects of …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 11–16 Read article