Search
43 articles for “Flexure Mechanism”
-
Mechanical Behavior and Model Fitness of the Natural Fiber Composite: A Study on Orange Peel and Charcoal Composite
Abstract: In this paper, orange peel with charcoal in addition with epoxy resin composite is tested for the behavior of mechanical properties. The results depicted that the best hardness, thickness, tractable flexural are getting for the material organized with the 20 % of weight sustained orange strip epoxy composite. The obtained results were also tested for regression analysis for validate the experimental data for assessment of model fitness. Keywords: natural composite …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 33–42 Read article
-
Interfacial Engineering and Performance Optimization of Jute-Fiber-Reinforced Epoxy Laminates
Abstract: The increasing environmental concerns associated with synthetic fiber reinforced polymer composites have driven substantial research interest toward naturally derived, biodegradable fiber alternatives. This study presents a comprehensive mechanical and thermal characterization of jute fiber reinforced epoxy composites fabricated via hand lay-up followed by compression molding. Jute fibers were subjected to alkali treatment using 5 wt% sodium hydroxide (NaOH) solution for 4 hours at ambient temperature to enhance fiber–matrix interfacial bonding …
Published in International Journal of Polymer Science and Engineering · Vol. 12, Issue 1, 2026 · pp. 52–64 Read article
-
Study on Properties of Concrete Cured With Poly Ethylene Glycol-600
Abstract: After water, concrete is the most using material globally. Without concrete, the world is unimaginable. The foundation of civilization is concrete. Coarse aggregate, cement ,fine aggregate and water are the main ingredients in concrete, which requires curing to attain its strength. Concrete must therefore cure for 28 days in order to complete the necessary hydration, desired strength. For the traditional curing processes, a lot of water is needed. This becomes …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
A Review of Bamboo Fiber’s Use in Concrete
Abstract: AbstractLocal sustainable materials must be found and used in the building and provision of homes due to therising demand for natural resources in emerging nations. Natural building materials that are regardedas sustainable are “green”, thousands of tons of bamboo are traded annually, and this creates a lot ofwaste. Bamboo was utilized in the building’s construction as well as in structural elements like roofing,columns, and supports. The main component utilized in …
Published in International Journal of Manufacturing and Materials Processing · Vol. 10, Issue 2, 2024 · pp. 33–36 Read article
-
Experimental Study on the Surface Properties of Coconut Husk Fiber and Banana Fiber Treated with Sodium Lauryl Sulfate
Abstract: The focus of modern research is on using natural, biodegradable, and renewable materials in place of synthetic ones. Composites made from natural fibers are undergoing extensive research because of their unusual characteristics and eco-friendliness. Natural fibers have the benefits of being readily available, simple to handle, and biodegradable. One of the best ways to improve the mechanical characteristics of polymer is to reinforce it with natural fibers. With hybrid composites, …
Published in International Journal of Composite and Constituent Materials · Vol. 10, Issue 2, 2024 · pp. 13–24 Read article
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Experimental Study on Mechanical Properties of E-glass Fiber and Epoxy Resin Hybrid Composite Material
Abstract: Hybrid composites occupying the area of standard materials by satisfying the necessities of various sectors like part industries, automobile industries, ship building and numerous bio-medical sectors. the most reason to substitute standard materials is that the hybrid composites giving same or additional needed properties with less weight and value than standard materials and most output in minimal consumption with higher lifespan to seek out the economical suggests that of utilizing …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 20–36 Read article
-
High Strength Concrete (M40) Using Micro Silica and Steel Fiber
Abstract: Abstract: This experimental study examines the combined effects of micro silica (silica fume, SF) as a partial cement replacement and hooked-end steel fibers on the mechanical properties of M40 grade concrete. Concrete mixes were designed as per IS:10262 with a target characteristic compressive strength of 40 MPa. Silica fume was incorporated at 0%, 5%, 10%, and 12% by weight of cement, while steel fibers (aspect ratio ~50) were added at …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 53–57 Read article
-
Impact, Flexural, and Hardness Properties of AISI 1018 Mild Steel Butt Joint Welded using Gas Metal Arc Welding (GMAW) under Various Welding Parameters
Abstract: AbstractThe effects of welding parameters such as welding current, voltage, and travel speed on the impact, flexural, and hardness properties of AISI 1018 mild steel using Gas Metal Arc Welding (GMAW) were investigated. In this research, specimen sizes of 500 mm x 10 mm x 10 mm and 5.5 mm x 10 mm x 10 mm were fabricated according to ASTM standards. In addition, a v-groove had been prepared at …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 6–13 Read article
-
Nanoenabled resinbased composites in restorative dentistry: mechanical performance, aesthetic outcomes, and global regulatory considerations
Abstract: Resinbased composites are central to contemporary restorative dentistry but remain constrained by polymerization shrinkage, wear and color instability, which compromise longterm restoration success. Nanoenabled resinbased composites (nanocomposites) have been developed to overcome these limitations by incorporating nanosized fillers and engineered nanostructures into conventional resin matrices, thereby enhancing mechanical properties and optical performance. This narrative Review summarises current evidence on the evolution, composition, and mechanisms of nanoenabled resinbased composites; compares their …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 12, Issue 1, 2026 · pp. 39–45 Read article
-
Effect of Nano-Fillers on the Mechanical and Fracture Behavior of Polymer Composite Matrices: A Review
Abstract: The modification of polymer composite matrices through the incorporation of nano-scale fillers has become a prominent and highly effective strategy for enhancing mechanical performance, stiffness, and fracture resistance. Unlike conventional micro-scale reinforcements, nano-fillers possess exceptionally high surface area–to–volume ratios and unique physicochemical characteristics that significantly influence interfacial phenomena within the polymer matrix. Materials, such as carbon nanotubes (CNTs), graphene nanoplatelets (GNPs), nano-silica, and layered silicate nanoclays, introduce advanced toughening mechanisms …
Published in International Journal of Composite Materials and Matrices · Vol. 12, Issue 1, 2026 · pp. 31–36 Read article
-
Effect of Elevated Temperature on Compressive Strength and Flexural Strength of Fiber Reinforced Concrete
Abstract: Now a day concrete is being used extensively in the construction that might be subjected to elevated temperatures. The behavior of concrete structures at elevated temperatures is significant importance in predicting the safety of structures in response to certain accidents or particular service conditions. This paper deals with the mechanical properties of concrete with steel fibers subjected to temperatures up to 500°C. The specimens were kept in oven for 1 …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 19–32 Read article
-
Sustainable Labware Solutions: A Study of Biodegradable Modified Polypropylene for Sterilization‑Resistance
Abstract: This study investigated the impact of incorporating a 1‑3% by weight of biodegradable additive into polypropylene (PP) using twin‑screw extrusion, followed by injection molding to prepare test specimens. The effects of the additive on the rheological, thermal, mechanical, and optical properties of PP were investigated, along with the impact of two common sterilization methods: autoclave (121°C, 15 min, 0.11 MPa) and electron beam (E-Beam, 50 kGy) irradiation. The results showed …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 1, 2025 Read article
-
Multiple Regression Analysis of Compressive, Flexural, and Split Tensile Strength in M40 Grade Concrete
Abstract: Concrete plays a key role as a construction material across the globe. The strength parameters of the concrete are primary reason for which it is designed for. The design mixed concrete has multiple strength parameters like compressive strength, spilt tensile strength, flexural (bending) strength etc. For each newly design mixed concrete, the mentioned strength parameters are tested for various time duration like 3 days, 7 days, 14 days, 28 days …
Published in International Journal of Construction Engineering and Planning · Vol. 11, Issue 2, 2025 · pp. 20–34 Read article
-
Production and Evaluation of Composites Made from Waste Material and Recycled Poly(Ethylene Terephthalate)
Abstract: A significant ecological concern that third-world countries are currently facing is the economically viable use of lignocellulose waste. In addition to reducing the cost of the composite, cellulosic fiber composites created from industrial waste would enable the efficient use of a waste material that is presently disposed of or burned. Recycled poly (ethylene terephthalate) was used in this work as a major phase (matrix) and industrial waste material was used …
Published in International Journal of Energetic Materials · Vol. 11, Issue 1, 2025 · pp. 1–12 Read article
-
Enhancing the strength and flexibility of crowns and bridges: advances in materials, design, and nanotechnology.
Abstract: The continuous advancement in restorative dentistry has led to the integration of nanotechnology in the fabrication of crowns and bridges, significantly enhancing their mechanical and functional performance. Nano-enhanced materials, including nanoparticle-reinforced resin matrices, nanostructured ceramics, and nano-modified adhesive systems, demonstrate superior properties compared to conventional materials. These improvements are largely attributed to the uniform dispersion of nanoparticles, which enhances filler–matrix bonding, increases surface interaction, and reduces microstructural defects, resulting in …
Published in International journal of Nanobiotechnology · Vol. 12, Issue 1, 2026 · pp. 34–42 Read article
-
Mechanical Behavior of Calotropis Gigantea FruitBunch Fiber-Epoxy Composites
Abstract: Global warming solutions in the modern era are centered on substituting environmentally friendly biodegradable materials for fossil fuels to slow down the rate at which they are being depleted. The study literature supports the use of substitute materials for plastics in the creation of composite materials, and this work envisions the use of Calotropis gigantea fruit bunch fiber as one such substitute material. Since Calotropis gigantea fruit bunch fiber is …
Published in International Journal of Composite Materials and Matrices · Vol. 10, Issue 2, 2024 · pp. 45–58 Read article
-
Effects of Compatibilizer and Paper Sludge Content on the Performances of Thermoplastic Polymer Composites
Abstract: One of the environmental issues affecting third-world countries is the economic use of lignocellulose waste, which is now being researched. Paper sludge (PS) composites will allow for the effective use of a waste material that is currently burned or buried, as well as the ability to lower the cost of the composite that is created. In this study, the mechanical and thermalcharacteristics of environmentally friendly composites constructed from PS-reinforced recycled …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 8, Issue 2, 2022 · pp. 10–21 Read article
-
Effect of Natural Cellulosic Fiber Surface Modifications on the Mechanical Feature Reinforced Polymer Composites
Abstract: The current era's remedies to global warming revolve around replacing fossil fuels with more ecologically friendly biodegradable materials in order to slow down the rate at which they are being depleted. Calotropis gigantea fruit bunch (CGFB) fiber is one kind of substitute material that this work envisage using in place of plastics in the construction of composite materials, as supported by the study literature. CGFB fiber was chosen for this …
Published in International Journal of Chemical Engineering and Processing · Vol. 11, Issue 1, 2025 Read article
-
Mechanical Properties of sand blasting residue concrete
Abstract: Sand Blasting Residue (SBR) form chain manufacturing companies as a large massive by-product. Steel-slag hydrated matrix is made of ground granulated blast furnace slag powder & steel-making slag which is the by-product of iron manufacturing. This type of construction material is called environmental conscious material in Japan. This research presented that the strength of steel-slag hydrated matrix depends on the pH of the steel-slag hydrated matrix after mixing. Firstly, cement, …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 46–52 Read article