Search
216 articles for “Liquid”
-
EFFECT OF GREEN LIQUID ON CURE CHARACTERISTICS AND PHYSICAL PROPERTIES OF NBR/PVC BLEND
Abstract: Compounding or formulation refers to the addition of certain chemicals to raw rubber in order to obtain the desired properties which are to be prepared by mixing additives to fulfil the processing, performance and economic statistics of rubber products. The common chemicals and for alternation of such properties are cross linking agents, reinforcement agents, antidegradants, plasticizers, curatives and stabilizers. The present communication report synthesis of Ionic Liquid and effect of …
Published in International Journal of Green Chemistry · Vol. 5, Issue 1, 2019 · pp. 1–6 Read article
-
Analysis of Vapour-Liquid Equilibrium Behaviour of Cryogenic Hydrogen-Deuterium Mixtures Using Cubic Equation of State-based Method
Abstract: A comparative analysis of the vapour liquid equilibrium behaviour of the cryogenic hydrogen-deuterium system calculated under the assumption of an ideal solution using pure component vapour pressure data versus that of a real solution using Peng-Robinson cubic equation of state has been presented in this work. It is found that assumption of ideal solution leads to over prediction of the relative volatilities by 14% to 57% depending on the mixture …
Published in International Journal of Chemical Separation Technology · Vol. 4, Issue 2, 2018 · pp. 1–13 Read article
-
Chemical Analysis for the Production of Liquid Detergent
Abstract: This research work is focused on rendering chemical analysis on the production of detergent with focus on the application of sodium tripolyphosphate, carboxymethyl cellulose, sulphonic acid, sodium hydroxide (caustic soda), sodium silicate, and others not mentioned. In this analysis, we considered the mixture of detergent production formulated to meet the required cleansing standard of various applications. Therefore, pH of the detergent was maintained between 7 and 8 to avoid corrosion …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 9–14 Read article
-
Ultrasonic Study of Binary Liquid Mixtures of Triethyl Amine With Primary Alcohols at 303.15 K
Abstract: Most of the physical properties change whenever there is a change in the composition and structure of the liquid mixture. Then non-linear dependence of the physical–chemical properties with composition has been attributed to the size, shape, and polarity of the molecules. Ultrasonic velocity is one such property which is very important for the study of molecular interactions in solution. It gives information about the extent of interaction and some other …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Thermodynamic Explanation on Surface-Driven Capillary Flow of Working Liquids in the Microfluidic Devices Fabricated by Polymers
Abstract: In this experimental work, total 100 individual microfluidic devices are fabricated by polymers using author’s own hands-on completely. A set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by SU-8 using the maskless lithography and indirect bonding technique. Another set of straight microchannels, gradual expansion microchannels, sudden expansion microchannels and sudden contraction microchannels are fabricated by PMMA using the maskless lithography, hot embossing …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 1, 2020 · pp. 45–70 Read article
-
Mass Production and Isolation of Trichoderma harzianum from Different Media Using Liquid and Solid Fermentation Technique and Evolution against Fusarium oxysporum
Abstract: Mycelial growth conidal production and biomass yield of trichoderma species (Trichoderma harzianum) were examined on different culture media including potato dextrose media, waksman media, soyabean meal media, glucose peptone media, jaggery media, malt extract media, cornmeal media, czepaks media. A big factor in growth rate was the medium. The optimum medium in terms of growth spore generation and biomass output was soyabean meal media. For mycelial growth, biomass output, and …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 1, 2022 · pp. 27–37 Read article
-
Comparative Study of Molecular Interactions in Binary Liquid Mixtures of 4-Methyl-2-Pentanone with Aniline, N, N-Dimethyl Aniline and Chlorobenzene at 308 K
Abstract: The ultrasonic velocity (u), density (ρ) and viscosity (η) have been restrained for binary mixtures of 4-methyl-2-pentanone with butan-2-one, cyclohexanone and furfuraldehyde at temperature T=308K at changed mole fractions. The experimental data have been used to calculate the acoustical and thermo-dynamical parameters like adiabatic compressibility (βad), free length (Lf), free volume (Vf), internal pressure (πi), acoustical impedance, Gibb’s free energy and their excess volumes in particular, it is seen that …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 19–29 Read article
-
Determination of Poly Chlorinated biphenyls in sediment of Trondheim fjord (Norway) and Lake Tana (Ethiopia) using pressurized liquid extraction (PLE) and Gas Chromatography – Mass Spectrometry (GC-MS).
Abstract: The presence of polychlorinated biphenyls (PCBs) in the environment is of great concern, as they are compounds that are hazardous to the environment and human health. Environmental investigations of PCBs can be challenging as they are found in trace amount, thus, it is important to have a reliable method for the determination of PCBs in environmental samples. In this work, an analytical method for the determination of PCBs in marine …
Published in International Journal of Environmental Chemistry · Vol. 5, Issue 2, 2019 · pp. 1–10 Read article
-
Seismic Performance Of RC Elevated Liquid Storage Tank Supported On Partial Shaft Type And Full Shaft Type Staging.
Abstract: Elevated water tanks are mostly used in public water distribution system. These structures are most vulnerable under earthquake excitation due to large lumped mass concentrated at the top of slender supporting structure. In this dissertation, a comparative study is made on seismic performance of elevated intze shape water tank supported partial shaft type staging and full shaft type staging of 2,50,000 litre capacity. The analysis s carried out in accordance …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 1, 2020 · pp. 40–51 Read article
-
Effect of Circular Polyimide Micropillars on Surface-Driven Capillary Flow of Dyed Working Liquids inside the SU-8 based Glass Microfluidic Devices
Abstract: In this experimental work, total 8 individual SU-8 based glass microfluidic devices are fabricated using Mukhopadhyay’s own hands-on completely. Maskless lithography and indirect bonding technique are the methods to fabricate these devices. A CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow in each device. Dyed water and dyed ethylene glycol are the selected and prepared …
Published in International Journal of Water Resources Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Surface-Driven Capillary Flow of Dyed Working Liquid in the SU-8 based Glass Microfluidic Device Fabricated by Maskless Lithography and Indirect Bonding Technique
Abstract: A single SU-8 based glass microfluidic device is fabricated by the maskless lithography and indirect bonding technique, using the negative photoresist SU-8. Polymethylmethacrylate (PMMA) dissolved in EC solvent (SU-8 developer) is used as the prepared adhesive material in the indirect bonding technique. Dyed water (90% red coloured food dye, 10% distilled water) is prepared as the working liquid. A CMOS camera catching 25 frames per second with a corresponding time-scale …
Published in International Journal of Microelectronics and Digital integrated circuits · Vol. 4, Issue 2, 2018 · pp. 26–31 Read article
-
Cause of a Serious Condition Blasts’ Liquid for Airbag Classification
Abstract: The explosion was fairly strong, and the entire unit was blasted into the air. In front of the airbag, there is a thin layer of plastic casing, which is ripped by the pressure that is developing within during the explosion. The airbags inflate as a result of the explosion. The chemical used in the airbag is sodium azide. These detectors in front of the automobile transmit an electrical impulse to …
Published in International Journal of Energetic Materials · Vol. 8, Issue 1, 2022 · pp. 38–42 Read article
-
A Simplified High-Performance Liquid Chromatographic Method For Determination of Vitamin D3 in Human Serum
Abstract: Diabetes is a metabolic disorder caused by defective insulin secretion, insulin action or both. The two major factors for the development of diabetes are pancreatic beta cell dysfunction and insulin resistance. In type 2 diabetes mellitus, production and release of insulin is unobstructed but due to factors like ageing or obesity, the produced insulin cannot compensate for the increased demand. Measurement of the serum level of 25-hydroxyvitamin D3 is the …
Published in International Journal of Analytical and Applied Chemistry · Vol. 3, Issue 1, 2017 · pp. 9–13 Read article
-
Design and Implementation of Liquid Crystal Devices and Study its Nano Applications
Abstract: Photoalignment has clear benefits in correlation with the ordinarily "scouring" treatment of the substrates of fluid precious stone presentation (LCD) cells. The fluid gem photoalignment is nano- innovation, as the thickness of the arrangement layer is around 2–15 nm. The use of the photograph arrangement and photograph designing nano innovation for the new age of photonic and show gadgets will be inspected. We discussed about LC polarization regulators, rotators, and …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 31–39 Read article
-
Wettability of carbon fibers with resin matrices from dynamic contact angle measurements
Abstract: Wettability is the property that quantifies the propensity of a solid surface (carbon fiber) to be covered by a liquid (resin). For a wettable solid, the solid-liquid contact is favoured and as a result the liquid spreads on such surface of the solid. Spreading of the liquid on the solid surface is primarily driven by the adhesive forces between the liquid and the solid, while the inter molecular cohesive forces …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 Read article
-
Crystals (Thermotropic phases and Lyotropic phases) in Physical Properties
Abstract: In the current years there has been a cumulative growth to add the numerous nanomaterials to liquid crystals which is encouraged via frequent elements of resources advance. (i) accumulation of nanomaterials can conversion and thus melody the belongings of the liquid crystal (ii) inventive functionalities can be added to the liquid crystal (iii) the self-organization of the liquid crystalline formal can be abused to pattern systematic structures or to assignment …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Green Solvent Extraction: Sustainable Approaches for Chemical Separation
Abstract: Solvent extraction techniques have advanced significantly as a result of the increased focus on sustainability and environmental responsibility. Traditional organic solvents, while effective in chemical separation processes, often contribute to environmental pollution and pose health risks. In response, researchers have explored greener alternatives that minimize these adverse effects. Compared to traditional procedures, green solvent extraction offers safer and more environmentally friendly solutions by using bio-based solvents, ionic liquids, and deep …
Published in International Journal of Chemical Separation Technology · Vol. 11, Issue 1, 2025 Read article
-
Investigation of Mass Transfer Coefficient and Gas Hold Up and Bubble Size Distribution in Novel Design of Stirred Tank Reactor
Abstract: Stirred tanks are commonly used in chemical industries for reaction and separation. Large-scale reactors include many impellers to improve mixing performance. Agitator plays an important role during the gas-liquid contact in two phase flow. And it is very necessary to know for the understanding of any gas-liquid system. So, in this study my motto is to study which parameters affects in the mixing of gas inside the liquid. The parameters …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 2, 2022 · pp. 5–12 Read article
-
A Review on Nanobubbles
Abstract: Nanotechnology is an advancing field of research, there are many innovations happening in the field of nanotechnology terrain. There are investigation needs for sustainable generation procedures, stability and understanding the nanobubbles interfacial properties and structures. The author concluded that a decline in pressure makes the super-saturated liquid suffers cavitation and nanobubbles were generated. Keywords: liquid, nanobubbles, pressure, supersaturated
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 1, 2018 · pp. 1–4 Read article
-
Short Experimental Report on the Passive Microfluidic Flow in Fluid Mechanics
Abstract: In this work related to experiments, two individual polymethylmethacrylate (PMMA) based microfluidic devices (microchannel bends) are fabricated by the following techniques: (a) maskless lithography, (b) hot embossing lithography, and (c) direct bonding technique. Dyed water is chosen as working liquid in this particular work. The CMOS camera is used to capture each passive microfluidic flow of dyed water in the fabricated devices. The effects of channel aspect ratio and centrifugal …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 32–37 Read article