Search
405 articles for “mechanical properties”
-
Exploring the Utilization of Bakelite Waste as a Partial Coarse Aggregate Replacement in Concrete: An Assessment of Mechanical Properties and Durability
Abstract: Abstract The burgeoning challenge of plastic waste management has prompted researchers to seek sustainable alternatives within various sectors, particularly in the construction industry, which is a significant consumer of raw materials. This study thoroughly investigates the viability of incorporating Bakelite waste, a type of thermosetting plastic known for its durability and resistance to degradation, as a partial replacement for coarse aggregates in concrete formulations. Concrete mixtures were meticulously designed with …
Published in International Journal of Concrete Technology · Vol. 10, Issue 2, 2024 · pp. 6–10 Read article
-
Experimental Study on Mechanical Properties of E-glass Fiber and Epoxy Resin Hybrid Composite Material
Abstract: Hybrid composites occupying the area of standard materials by satisfying the necessities of various sectors like part industries, automobile industries, ship building and numerous bio-medical sectors. the most reason to substitute standard materials is that the hybrid composites giving same or additional needed properties with less weight and value than standard materials and most output in minimal consumption with higher lifespan to seek out the economical suggests that of utilizing …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 20–36 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
A Study on Evaluation of Mechanical Properties of Reinforced Composite Developed Using Corn Husk and Glass Fibre
Abstract: With the increasing demand for the disposal of polymer wastes and environmental waste from agriculture/ farming, this research aims to develop composite materials by using glass fibre and corn husk fibres by hand lay-up technique. The fibre from the maize husk was extracted and then overlapped on glass fibre cloth films in regular or irregular orientations. The reinforcement is done with the epoxy resin. The reinforcement and harden matrix are …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 32–36 Read article
-
A Literature Review on the Mechanical Properties of Banana Fiber Reinforced Polymer Composites
Abstract: The usage of composite materials and environmental contamination, as well as the utilization of renewable and biodegradable resources, are closely intertwined in today's rapidly developing world. An environmental researcher is hunting for sustainable materials. The forms and sizes of both natural and synthetic fibers are diverse. Researchers, engineers, and scientists have recently become interested in natural fibers as an alternative reinforcement for fiber-reinforced polymer composites. They are used to replace …
Published in International Journal of Polymer Science and Engineering · Vol. 8, Issue 2, 2022 · pp. 1–12 Read article
-
To Study Mechanical Properties of Concrete by Using Industrial Waste Material
Abstract: Concrete is a very important material with cement, water, aggregate and admixture as contents. Due to increasing pollution and demand of concrete, its production should be environmental friendly. In this study, we emphasize on environment friendly concrete. The proportion of silica fume was as follows: add 3%–15% in interval of 3% by weight of cement in concrete and fly ash was add 5%–25% in interval of 5% by total weight …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 18–27 Read article
-
Green Routes for Modification of Cure Characteristics and Mechanical Properties of Rubber Compound
Abstract: Compounding of rubber is very crucial to make the raw rubber suitable for its end use. Term Compounding of rubber refers to the selection and mixing the different ingredients that fulfil the processing, performance, cost requirements of finished rubber products. The compounding ingredients include fillers, reinforcements, plasticizers, curatives, accelerators, stabilizers etc. The curatives play key role in the formation of crosslink or vulcanisation. Since Ionic level (IL) has very low …
Published in International Journal of Green Chemistry · Vol. 3, Issue 1, 2017 · pp. 1–9 Read article
-
EFFECT OF HEAT AGEING ON MECHANICAL PROPERTIES OF POLYAMIDE 6(NYLON 6) & POLYAMIDE 12(NYLON 12)
Abstract: Polyamide 6 or Nylon 6(PA 6) and polyamide 12 or Nylon 12 (PA 12) are well known engineering semi-crystalline polar polymers characterized by the presence of amide linkage (-CONH-) in the repeating units of their chains. The glass transition temperature (Tg) of PA 6 and PA 12 is ~50 °C and ~37 °C respectively. PA 6 is widely used for gears and bearings, fittings in automobile industry for under hood …
Published in International Journal of Polymer Science and Engineering · Vol. 2, Issue 2, 2016 · pp. 1–12 Read article
-
Influence of GGBFS on the Mechanical Properties of the Water Cured Fly Ash Aggregate-Based Geopolymer Concrete
Abstract: Abstract Conventional concrete consists of cement, sand as fine aggregate and gravel, limestone or granite in various sizes and shapes as coarse aggregate including with water. In the present work, the feasibility of using industrial inorganic polymeric residues wastes as a total (100%) replacement to the traditionally used normal conventional concrete materials is examined in the preparation of the geopolymer concrete (GPC). In this GPC, the cement is totally replaced …
Published in International Journal of Concrete Technology · Vol. 2, Issue 1, 2016 · pp. 54–64 Read article
-
Improvement of mechanical properties of recycled polyethylene with utilization of bio-filler
Abstract: Nowadays, the consumption of plastics all over the world has been tremendously growing, which is culminating into large amount of waste plastic material. It is believed that the management of solid waste is one of the major environmental concerns in the world. Due to limited space on landfills and increasing costs of plastics, utilization of waste plastics has become an attractive alternative for disposal. This research work describes the preparation …
Published in International Journal of Green Chemistry · Vol. 3, Issue 1, 2017 · pp. 18–26 Read article
-
Experimental Study of Mechanical Properties Geopolymer Concrete.
Abstract: This experimental study aimed to define the parameters for optimum mix design of geopolymer concrete made by partial replacement of cement. The geopolymer concrete is nothing but the formation of fly ash and alkali activators. Fly ash is the waste product from the thermal power station and may use as the pozzolanic material. But, only fly ash is may not the only replacement for the cement, for the more binding …
Published in International Journal of Concrete Technology · Vol. 5, Issue 2, 2019 · pp. 16–22 Read article
-
Mechanical Properties of sand blasting residue concrete
Abstract: Sand Blasting Residue (SBR) form chain manufacturing companies as a large massive by-product. Steel-slag hydrated matrix is made of ground granulated blast furnace slag powder & steel-making slag which is the by-product of iron manufacturing. This type of construction material is called environmental conscious material in Japan. This research presented that the strength of steel-slag hydrated matrix depends on the pH of the steel-slag hydrated matrix after mixing. Firstly, cement, …
Published in International Journal of Concrete Technology · Vol. 6, Issue 2, 2020 · pp. 46–52 Read article
-
Effect of Temperature on mechanical properties of Geopolymer concrete: A Review
Abstract: Concrete is the most widely used material after water in building and construction field. It is the oldest man-made material and is easily available for use at cheaper costs. This material is causing harm to environment on mass extent. OPC i.e. Ordinary Portland Cement is second contributor after automobile industry in Carbon Dioxide emission. This review presents the study of replacement of regular concrete cement with cementitious material like fly …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 24–28 Read article
-
Effect of House Hold Waste Glass on mechanical properties of concrete
Abstract: Waste management is of great problem in current scenario. A huge amount of waste is generating from various industries in large amount. A few amounts can be recycled otherwise lots of them as a waste to dump into the dump yard. This waste is creating problem in surrounding area which also impact on environment. Other side the problem related to river sand is increasing due to large exploration of river …
Published in International Journal of Concrete Technology · Vol. 8, Issue 1, 2022 · pp. 1–8 Read article
-
Short Communication: Physico-Mechanical Properties of Rice Husk Geopolymers
Abstract: Concrete may be a wide used construction material for varied kinds of structures thanks to its structural stability and strength. However, the assembly of hydraulic cement, a main element of constructing concrete, contributes important quantity of greenhouse emission, as a result of the assembly of 1 ton of hydraulic cement additionally releases regarding one ton of dioxide gas into the atmosphere. Additionally the extent of energy needed to provide OPC …
Published in International Journal of Structural Engineering and Analysis · Vol. 2, Issue 1, 2016 · pp. 34–35 Read article
-
Development of Epoxy Based Hybrid Composite Reinforced with Jute and Glass-fiber and Effect of Silicon Carbide additive on it’s Mechanical Properties
Abstract: In this project, an effort is made to compare the improvement of the matrix material properties because of the presence of the fillers and additives. Initially, hand lay-up process was carried out in a mold of known dimensions to layup jute fibers of varying weight percentages in the epoxy matrix. Another composite with glass fibers of similar weight percentages to that of jute were laid up in epoxy matrix in …
Published in International Journal of Composite and Constituent Materials · Vol. 4, Issue 2, 2018 · pp. 8–12 Read article
-
Effect of Pulsed Current Micro Plasma Arc welding parameters on Mechanical properties AISI 304 and AISI 430 dissimilar weld joint
Abstract: In the present work, two dissimilar AISI 304 and AISI 430 sheets of 0.4mm thick welded using Micro Plasma Arc Welding. Welding input parameters like peak current, base current, pulse rate and pulse width are considered and output responses like fusion zone grain size, hardness and ultimate tensile strength of the welded joint are considered. 31 experiments are performed as per Central Composite Design (CCD) design matrix of Response Surface …
Published in International Journal of Manufacturing and Materials Processing · Vol. 5, Issue 1, 2019 · pp. 1–26 Read article
-
Influence of Compatibilizers on the Morphology, Mechanical, Thermal andRheological Properties of Polypropylene/Organomuscovite Nanocomposites
Abstract: In this study, the effects of two different compatibilizer types-maleated polypropylene and hexamethylenediamine modified maleated polypropylene-on the characteristics of a polypropylene/maleated polypropylene/organo-muscovite clay nanocomposite were investigated. By combining polypropylene with three different levels of organo-muscovite clay content, two distinct compatibilizers were used to make the nanocomposites, each with a fixed amount of 10 weight percent. The compatibilizer's effects on the morphological, mechanical, thermal, and rheological characteristics of nanocomposites were then …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 · pp. 25–36 Read article
-
Study on Preparation and Properties of Agro-waste Particleboard at Various Press Temperatures
Abstract: This study concerns the influence of temperature on changes in physical and mechanical properties of particleboard fabricated from betel nut (Areca catechu L) fiber (Agro-waste) and urea-formaldehyde adhesive during hot-pressing with multiple press temperatures (120, 130, 140, 150 and 160°C) at 15 minutes. The physical and mechanical properties of particleboards were determined by British Standard (BS-1811) and Indian Standard (IS-3087) Methods. For some physical and mechanical properties, it appears that …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 40–47 Read article
-
Effect of Glass Fiber, Carbon Fiber, and Hybrid Form on Tensile Properties of Pa66/Pp Polymer Composites
Abstract: Mechanical loadings are applied to polymer materials, which are used in mechanical engineering applications. Usually, photopolymer fails to meet them, so some modification must be done to the polymer material. Adding fillers and fibers to the polymer will strengthen it by the polymer blending method. In this investigation, mechanical properties of glass fibers and carbon fibers and combinations of glass and carbon fiber are added to polymer composites. Considerable effort …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 27–33 Read article