Search
615 articles for “FEA”
-
Nano suspensions: A Potential Approach for Drug Delivery System
Abstract: Nanotechnology is likely to revolutionize our lives, in general, and health milieu, in particular. It is emerging discipline that comprises an aggrandizing sophisticated ability to manipulate matter at the nanoscale (0.1–1000 nm) resulting in new material, product and device that demonstrate new and unusual behavior. This paper garners information regarding the intriguing feature of nanosuspension and its properties. Nanosuspension have many advantageous since it has an efficient solubility when compared …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 5–8 Read article
-
Nanoscience and Nanotechnology: A Review
Abstract: The field of nanotechnology has been recently blooming as the most economically and commercially feasible technology in the arena of science, medicine, research etc. The advent of nanomaterials like fullerenes, nanoparticles, nano powders, nanotubes, nanowires, nanorods, nano-fibers, quantum dots, nano sensors, nano robots and nano bubbles has wider range of applications in the field of medicine, research, cosmetic products, healthcare, electronics, photonics, biotechnology, engineering products, pharmaceuticals, drug delivery, and agriculture. …
Published in International journal of Nanobiotechnology · Vol. 5, Issue 1, 2019 · pp. 19–31 Read article
-
Expedition to Nanosynthesis: A Review
Abstract: Semiconducting metal oxide (like SnO2, ZnO, Ga2O3, Co3O4,TiO2, WO3, etc.) based gas sensors are widely used for the detection of the gases like H2, CO, Nox, CH4 and other hydrocarbons due to its smaller particle size as well as higher surface to volume ratio. Presently several nanoforms of metal oxides like rods, combs, rings, springs, wires, belts, propellers are becoming popular in the field of optoelectronics, ultra-sensitive nanosized gas sensors, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 1–23 Read article
-
A review on properties, stability mechanism, preparation method and application of Nanofluid
Abstract: Recent researches have showed that nanofluids are able to provide cooling system with higher heat transfer coefficient. This problem has been solved by the conversion of conventional fluids into nanofluids. A novel category of fluids with the mixture of nanoparticles (Size range of 1-100nm) in the host fluid is known as nanofluids. This paper focuses on the recent advancements in the study of nanofluids such as feature, limitation, various materials, …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 4, Issue 2, 2018 · pp. 31–40 Read article
-
Nanosuspension-novel Technique for Solubility Enhancement
Abstract: In the treatment of many diseases, getting medicinal compounds to the desired location is a serious issue. Poor biodistribution, limited effectiveness, unfavorable side effects, and a lack of selectivity define traditional medication use. Different types of nanostructures are produced using various size reduction processes and technologies, each with its own set of physicochemical and biological features. These technologies make nanostructures a good material for biomedical applications, and they've gained a …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 18–24 Read article
-
Impact of Nanotechnology in Textile Industry: A Review
Abstract: The preface of nanotechnology has revitalized several sectors, including the cloth assiduity. The current state of nanotechnology operation in fabrics is estimated, with a focus on enhancing different textile rates. Because of the unique features of nanoparticles and nanofibers, they may be utilized to produce fabrics with superior mechanical strength, chemical resistance, water repellence, antibacterial capabilities, and a plethora of other parcels that aren't possible with conventional accoutrements. Advancements in …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 7, Issue 2, 2021 · pp. 1–7 Read article
-
Nanolithography: A Promising Tool for Precision Nanofabrication
Abstract: Nanolithography is a crucial technique in nanofabrication that involves patterning materials on a manometer scale. With the increasing demand for smaller, faster, and more efficient electronic devices, nanolithography has become an indispensable tool in the semiconductor industry, where it is used to create structures for integrated circuits, sensors, and other nanoelectronic components. The two main types of nanolithography are top-down and bottom-up approaches. In top-down lithography, a bulk material is …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 2, 2022 · pp. 14–21 Read article
-
Bauschinger Effect on Micro-Lattice of Ti-6al-4v Implants by Using Finite Element Analysis
Abstract: This research's primary objective is to apply the Bauschinger effect to develop a micro-lattice of titanium alloy implants using nonlinear finite element analysis. In orthopedics, micro-lattice cellular Ti-6Al-4V designs with controlled porosity and pore sizes that are good for tissue ingrowth and biological mechanisms are often used. In this investigation, CAD models of various unit lattice structures were generated using Intra-Lattice software, incorporating design parameters such as strut length, strut …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 9, Issue 1, 2023 · pp. 18–24 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
A Review on Carbon Nanotubes
Abstract: Carbon nanotubes (CNTs), one of the unique one-dimensional nanomaterials, have gained great attention because of their specific characters, versatile functionalization chemistry, and biological compatibility in the past few decades. In this paper author tried to discuss some important features, different types of CNTs, synthesis methods, purification techniques, some properties and application of the CNTs in various sectors. At last there is conclusion and some scope for research work is also …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 2, 2019 · pp. 27–34 Read article
-
Experiments on the Passive Capillary Flow of Aqueous Ethanol in Sudden Expansion Microchannels towards the Applications in Nanofluidics and Nanoelectromechanical Systems
Abstract: In this work, total three individual sudden expansion microchannels are designed and fabricated by maskless lithography, hot embossing lithography and direct bonding technique inside the cleanroom laboratory. Polymethylmethacrylate (PMMA) is used as the selected polymer to fabricate these microchannels. Aqueous ethanol (15% ethanol, 85% dyed water) is prepared and used as dyed working liquid. Surface-driven (passive) capillary flow of prepared working liquid is recorded by a CMOS camera corresponding to …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 15–22 Read article
-
An Introduction of Nanotechnology: Classification, Uses, and Applications of Nanomaterials
Abstract: Nanomaterials (NMs) have acquired noticeable quality in creative advancements due to their tuneable physical, synthetic, and organic qualities with improved performance over their mass counterparts. The order of the NMs is determined by their size, creation, form, and starting. The ability to predict the unique features of NMs increases the value of each order. Because of the increased growth of NM creation and their current uses, difficulties relating to harmfulness …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 31–38 Read article
-
Magnetorheological Fluids as A Smart Material; A Prospect for Medical and Technological Application
Abstract: The effect of magnetic field on honey and blood, yolk and lave lake is investigated. The study reveals that the magnetic field guided bee honey and blood exhibits the magnetorheological fluid characteristics. The magneto resistive contribution is treated in terms of drug force in order to determine the coefficient of viscosity. The research presents that the viscosity of studied fluids will increase with the application of magnetic field. The variables …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 17–30 Read article
-
Abrasion Resistant Produce from Slag Dust
Abstract: Steel slag is a by-product of steel manufacture such as to respect the achievement of one ton to liberate 160 kg of steel slag. Thereby chemical compounds content in slag dust of steel slag have been SiO2, CaO, Fe2O3, Al2O3, and MnO, whereas mineral components of steel slag have been C3S, C2S, C4AF, RO phase, and free-CaO. Steel slag has been applied in ceramics, road pavement materials, stockpile of mineral …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 1–11 Read article
-
An Introduction of Graphene: Characterization and Properties
Abstract: Graphene - Its outstanding physical features, including as high electrical conductivity, good thermal stability, and superior mechanical strength, graphene, a two-dimensional, single-layer sheet of sp 2 hybridized carbon atoms, has received considerable attention and scientific interest. Other graphene-related compounds, such as graphene oxide, reduced graphene oxide, and exfoliated graphite, have been generated on a large scale with consistency. Graphene-based materials are great candidates for inclusion into a wide range of …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 2, 2021 · pp. 39–46 Read article
-
Assessment of Polymer Nanocomposite for Packaging Uses and Concerns about Environmental and Health Effects
Abstract: A nanocomposite material is composed of several phases with at least one, two, or three dimensions in the nanoscale range. When material dimensions are lowered to the nanoscale, phase interfaces are created, and they are essential for enhancing the material's characteristics. The surface area to volume ratio of the reinforced material used to create nanocomposites has a direct bearing on how structure and property relate to one another. Due to …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 10–36 Read article
-
Bio-based Composites for Sustainable Construction
Abstract: Bio-based composites are gaining significant attention as sustainable construction materials due to their eco-friendly nature and potential to reduce the environmental impact of traditional construction materials. This paper provides an overview of bio-based composites and their applications in sustainable construction. The use of bio-based materials, such as natural fibres, bio-based resins, and bio-based fillers, in composites offers several advantages, including reduced carbon footprint, renewable sourcing, and improved energy efficiency.The properties …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 75–80 Read article
-
An Efficient and Simple Higher Order of Shear Deformation Theory for Static and Free Vibration of Laminated Composite Plates
Abstract: In the present study, the static and free vibration of laminated composite plates is examined by using a refined shear deformation theory and developed for a bending analysis of orthotropic laminated composite plates. These models take into account the parabolic distribution of transverse shear stresses and satisfy the condition of zero shear stresses on the top and bottom surfaces of the plates. The most interesting feature of this theory is …
Published in International Journal of Composite Materials and Matrices · Vol. 2, Issue 1, 2016 · pp. 23–42 Read article
-
Study of Attenuation Coefficient of Cu, Ag & Au
Abstract: The Absorption coefficient or Ultrasonic attenuation of Cu, Ag & Au at the range of 1 GHz using the calculated values of mason non-linearity parameter, ultrasonic Gruneisen parameter, thermal relaxation time and Debye average velocity along with ultrasonic wave velocity and elastic constant have been studied. This is useful to understanding the mechanism of interaction between acoustic wave and crystal lattice. The work is also beneficial to resolve various problem …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 1–7 Read article
-
Developments of Photonic Ferroelectric Ceramic Compose
Abstract: This article is a study of imposed interposed crystal allotropic modification underexposure of electricity. Ferroelectric photonic ceramic powder and films are usual studied in preparation from adoptive transduction in the same crystal based on electrical gradient. Ferroelectric ceramics and thin films used to be processed by the sol-gel method, where empirical variables of interest have been their chemical composition, constituent phases, and microstructure. Functional attributes made metal oxide compose like …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 1, 2021 · pp. 37–44 Read article