Search
670 articles for “Indices”
-
Energetic Materials and Determination of Substance Deposits
Abstract: The evaluation philosophy, proposed by us, utilizing the Fourier change infrared attenuated all out reflectance (FT-IR/ATR) indicated fabulous results, being quicker than the typical procedures and can dispose of the era of substance deposits. Keywords: energetic material, FT-IR, polymer, thermogravimetric investigation
Published in International Journal of Energetic Materials · Vol. 1, Issue 2, 2015 · pp. 1–4 Read article
-
Model of Polarization on Ferroelectric Materials upon the Influence of Electric Field
Abstract: Mathematical model was developed to monitor, predict and simulate ferroelectric materials upon the influence of electric field. The developed model was applied using different materials of ferroelectric such as BaTio3, PbTiO3, lead Zirconate, titanate (PZT), triglycine sulphate, PVDF, lithium tantalite. The results obtained revealed that the utilizing and in terms of polarization and voltage relationship either increases or decrease before increasing at the end of process to form a loop. …
Published in International Journal of Energetic Materials · Vol. 4, Issue 1, 2018 · pp. 30–39 Read article
-
2-D ELECTRICAL RESISTIVITY TECHNIQUE FOR GROUNDWATER EXPLORATION IN IKERE – EKITI, NIGERIA
Abstract: The electrical resistivity techniques become one of the most widely used geophysical survey methods. Electrical resistivity method has been applied to various fields like groundwater and subsurface resource exploration. In the past, electrical resistivity was used in engineering, environmental and archaeological purposes. Its reliability depends on the expert interpretation skills of geophysicist. Applicable technique in groundwater exploration like electrical resistivity method which complement with existing conventional method will produce comprehensive …
Published in International Journal of Energetic Materials · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Value Addition of Quartz Gemstones through Gamma Irradiation
Abstract: Color enhancement of gemstones through gamma irradiation is an established technology throughout the world. By value addition, the traders earned manifold prices to these colorless stones as compared to the fresh ones. For the color enhancement of these semi-precious stones, optimized doses of irradiations are required. To get the optical properties of the stones and to investigate the crystal lattice and chemical composition, X-Ray diffraction (XRD) and energy dispersive X-ray …
Published in International Journal of Energetic Materials · Vol. 5, Issue 2, 2019 · pp. 61–67 Read article
-
Mathematically Modeling of PV-Wind Hybrid System
Abstract: The study of hybrid (Photovoltaic and wind) generation is used system which is consist of 1 kW wind and 1 kW PV. The solar radiation data and wind data of the School of energy Environmental studies from D.A.V.V Indore are analyzed for sizing of the renewable energy system. The output power of a wind turbine at a specific location depends on many factors, the amount of available energy increases with …
Published in International Journal of Energetic Materials · Vol. 8, Issue 2, 2022 · pp. 10–17 Read article
-
Ability of Metallic Materials to Resist Surface Damage Induced by High-temperature Action of Air or other Gaseous Mediums
Abstract: The features of the oxide layer scale that forms on the metal's surface and limits gas penetration into the metal, limiting the growth of gaseous corrosion, influence a metal's or alloy's oxidation resistance in an oxidising atmosphere. The rise in weight of sample being tested (due to oxygen uptake by the metal) or even the weight loss after removing the scale from the sample's surface, related to a unit surface …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 16–21 Read article
-
Nanocoating and Electrospray Techniques Use to Mitigation Corrosion Sculptures
Abstract: The most sculptures of the world are created by the brass, bronze, iron, silver, gold and metalloid. They come in contact of corrosive pollutants to produce chemical, electrochemical and biochemical reactions and develop various form of corrosion like uniform corrosion, galvanic corrosion, pitting corrosion, stress corrosion and crevice corrosion. The corrosive gases CO2, NO2 and SO2 concentrations increase in atmosphere rapidly after industrialization. The major contributors of these gases are …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 1–11 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Barcoding of DNA
Abstract: DNA barcoding framework is a promising methodology towards the onclusion of organic differing qualities utilizing DNA successions as an essential key for recovery of hereditary data. It is rising as an nstitutionalized technique for mapping different species on the earth. DNA barcoding is an instrument for ID of new species, preservation of imperiled species and bunching of different species under a specific gathering. Numerous databases have been produced over the …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 1, 2016 · pp. 14–19 Read article
-
Blend of biocompatible Magnesium oxide nano molecule and its anticancer action against human colon cell line
Abstract: Metal oxides occupy a critical part in numerous zones of science, and material science. Metal oxide nano materials are vital and fantastic materials. Present work concentrated on to union of MgO nanoparticle by Green technique utilizing [6]-Gingerol, were subjected to sub-atomic docking ponders for the restraint of leukotriene A4 hydrolase (LTA4H) protein is viewed as a significant focus for disease treatment. In silico expectation utilizing a docking approach uncovered that …
Published in International journal of Nanobiotechnology · Vol. 2, Issue 2, 2016 · pp. 8–15 Read article
-
Biosynthesis of silver nanoparticles using aqueous leaf extract of Muntingia calabura Linn.
Abstract: The present study was focused to synthesis silver nanoparticles using the aqueous leaf extract of Muntingia calabura L. as the reducing agent. The formation of silver nanoparticles was confirmed by colour change from light yellow to dark brownish red, UV-Visible Spectroscopy, FT-IR, X-Ray Diffraction Method (XRD), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis spectroscopy (EDS). The nanoparticles showed an absorbance at 443nm on UV-Visible spectroscopy. The presence of …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 1, 2018 · pp. 9–15 Read article
-
Chemometrics Analysis based on Infrared Spectroscopy of Emu Oil Obtained by Different Solventless Methods
Abstract: The multivariate analysis technique principal components regression (PCR) was used as a method of discrimination of the information obtained in the infrared spectra with the AssureID and Spectrum QUANT+ Software, to predict structural changes in emu oil extracted by solventless methods. A set of 20 spectra per sample for each extraction method was used, incorporating the spectral information in the calibration of the chemometric analysis. Variations in the spectra were …
Published in International journal of Nanobiotechnology · Vol. 8, Issue 2, 2022 · pp. 31–37 Read article
-
Gold Nanoparticles and its Preparation
Abstract: Among the colorimetric detection tactics, metallic nanoparticle based detection is gaining more attention due to quickness and less resource requirement at the point of use. Unique chemical inertness, shape, size and optical attributes of gold nanoparticles (GNPs) make them ideal for various diagnostic tools. In this approach synthesized GNPs were tabilized by citrate counter ions. These GNPs were characterized for their optical properties, shape, size, zeta potential, and dynamic light …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 31–34 Read article
-
Study the properties of spin-coated Co-doped ZnO (CZO) thin Film
Abstract: Co doped ZnO (COZ) nanoparticles were prepared by spray pyrolysis technique followed by annealing at three different temperatures. XRD, UV- Vis spectroscopy, Photoluminescence (PL) studies, Scanning electron microscopy (SE), and vibrating sample magnetometry (VSM) studies were made to analyze the structural, optical and magnetic properties. XRD pattern confirmed the improved crystallinity after annealing and the formation of hematite phase. A UV-visible spectrum indicates that the nanoparticles exhibit the blue shifting …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 2, 2017 · pp. 26–35 Read article
-
Magnetic Field Guided Diluted Magnetic Semiconductor, ZnxFe2-xO3 Nanoparticles for Biomedical and Biosensing Application
Abstract: The magnetic field guided nanoparticles are studied in the viewpoint of diluted magnetic semiconductor. Different structures and properties associated with Zn doped αFe2O3 nanostructures are presented in theoretical formulations. In addition, scientific methods of synthesizing particularly Solvothermal and biological methods of synthesizing Zn0.6Fe1.6O3 nanoparticles are discussed. More emphasis is given to the essence of nanotechnology from non-organic to organic matter namely nanoparticles of Zn0.6Fe1.6O3 to DNA. For in vivo or …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 8, Issue 1, 2022 · pp. 1–18 Read article
-
Comparative study of the Magnetoelectric Properties in Core-Shell Nanocomposites as well as mixture of CoFe2O4:BaTiO3
Abstract: Nanostructures of multiferroic materials have been drawing increasing curiosity due to the boosted magnetoelectric coupling and potential for succeeding generation multifunctional devices. Composites of ferroelectric and magnetostrictive materials indicate more magnetoelectric coupling than single phase materials. Core-shell CoFe2O4:BaTiO3 nanocomposites (1:1 weight ratio) and a mixture of both of them have been produced by a combination of hydrothermal and sol gel techniques. X ray diffraction analysis endorses the presence of both …
Published in International Journal of Composite and Constituent Materials · Vol. 1, Issue 1, 2015 · pp. 1–6 Read article
-
Thermal Material Used in Aerospace for Protection
Abstract: Ablative nanocomposites were set up by fusing multiwall carbon nanotubes (MWCNT) into phenolic gum and after that impregnating them into rayon-based carbon texture. MWCNT were mixed into phenolic gum at 0.5, 1, and 2 wt% loadings utilizing a mix of sonication and high shear blending to guarantee uniform scattering of MWCNT. The composite test examples were tried by utilizing an oxyacetylene test bed (OTB) applying a warmth flux of 1000 …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 1–2 Read article
-
A Review on Green Inhibitors to Corrosion of Steel
Abstract: Traditions of green corrosion inhibitors are described to elucidate soybean oil derivatives, Spondias cytherea leaves, Rosmarinus officinalis L. leaves, Chrysophyllum albidum; Tridax procumbens L. leaves, roasted coffee, Jatropha curcas leaves, Propolis, Manilkara zapota fruit peel, avocado, Canna indica flower. Green inhibitors are ever praised due to environmentally friendly usage. Industrial feasibility is studied from laboratory simulations. Carbonated drink corrosion of steel is most acceptable to use green inhibitors. Corrosion in …
Published in International Journal of Composite and Constituent Materials · Vol. 5, Issue 1, 2019 · pp. 12–21 Read article
-
Mechanical Behavior of Glass Fiber Reinforced Polyester Composites Modified with Silane Treated Alumina Nanofibers Subjected to Low-Velocity Impact
Abstract: The rise in demand and interest in lightweight offshore structures for marine, defense, automotive, and aerospace applications require nanoparticle enhancement of fiber-reinforced composite materials. When exposed to low-velocity Impact during service, these materials experience drastic changes and degradation in their macro-and microstructures. Therefore, it is critical to have a detailed comprehension of these materials' mechanical behavior and failure mechanisms. Within the scope of the current study, low-velocity impact behavior of …
Published in International Journal of Composite and Constituent Materials · Vol. 9, Issue 2, 2023 · pp. 55–73 Read article
-
Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
Abstract: Al–Mg base composites reinforced with different mixtures of nano-Al2O3 particles have been fabricated by mechanical stir casting and their metallurgical and mechanical characterization has been investigated. In this investigation, the Al2O3 particulates were reinforced into the base matrix of aluminium fabricated with five levels of volume fraction such as Al/0 vol.% Al2O3, Al/2 vol.% Al2O3, Al/4 vol.% Al2O3, Al/6 vol.% Al2O3 and Al/8 vol.% Al2O3. After the Al-base-nano-composites were fabricated …
Published in International Journal of Composite Materials and Matrices · Vol. 1, Issue 1, 2015 · pp. 28–34 Read article