Search
577 articles for “Waste”
-
Sustainable and Renewable Technologies for Energy Demands
Abstract: At present a lot of stress is on the use of renewable energy and development of energy conversion technology capable of harnessing renewable energy. In 2012 the world energy consumption was 5.6 × 1020 Joules and the share of oil was 31.4%, for coal it was 29.0%. Share for natural gas in increasing day by day and it is estimated to be 21.3%. Other sources of the energy such as …
Published in International Journal of Energetic Materials · Vol. 2, Issue 1, 2016 · pp. 19–23 Read article
-
Evaluation of Rivers State Promotional Strategies for Virtual Power Plant using 100% Renewable
Abstract: The physical wellbeing of people is attributed to efficient energy, and it is also pivotal in thedevelopment of a country’s economy. In Nigeria, constant availability of power has become a problemfrom independence to this day. Energy from biomass, wind solar and hydro-power, would be helpful insolving the country’s problem in terms of electricity. It is estimated that Nigeria can produce 2.01 EJ(47.97 MTOE) of energy from 168.49 million tones of …
Published in International Journal of Energetic Materials · Vol. 7, Issue 1, 2021 · pp. 22–31 Read article
-
Study on Hazardous Explosives
Abstract: The Mining sector uses explosives to extract ore and discover orebodies, according to the Canadian Explosives Research Laboratory. Oil and gas companies use them to construct pipelines, the forest business uses them to construct roads, and the construction industry uses them to construct infrastructure. Explosives are required by the aerospace sector to power the rockets that launch satellites into orbit. Among other things, explosives are necessary for the rocket fuel …
Published in International Journal of Energetic Materials · Vol. 7, Issue 2, 2021 · pp. 26–33 Read article
-
Evaluating Photo-Catalytic Application of TiO2 Nano Particles Augmented With H2O2 for Mineralization of Pharmaceutical Effluent
Abstract: Interest in the photocatalytic oxidation of non biodegradable organics from contaminated wastewater is growing rapidly. The photocatalytic activity of TiO2 nano particles synthesized via Sol-Gel method for the degradation of pharmaceutical effluent under UV light was discussed in this study. The TiO2 nano particles were characterized by X-Ray Diffraction (XRD) to determine size, Morphology Index, Specific Surface area and surface to volume ratio. The XRD results revealed that the TiO2 …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 1, 2018 · pp. 31–36 Read article
-
Treatment of Oil Spills and Heavy Metals in Environment
Abstract: Treating oil spills and heavy metals is the problem of the old decades and continued to find technicalsolutions to address the problems of pollution with heavy metals and oil spills in sea waters as aresult of transporting oil in ships. In general, the health of all marine and terrestrial organisms aswell. This term usually refers to offshore oil spills, where oil is poured into the ocean or coastalwaters, but may …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 9–16 Read article
-
Creating Awareness on Toxic Nature of Lead
Abstract: In our day-to-day life, we come across in contact with hundreds of substances such as natural or synthetic which are toxic. In recent time, the number of chemical substances in use as increased drastically. Lead is one such element that contaminates the environment and also enters the human body. Heavy metals have relatively high density and are toxic even at ppb levels which include Pb, As, Hg, Cd, Zn, Ag, …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 2, 2021 · pp. 44–47 Read article
-
Review on Electrolytic Process by Refining the Metals
Abstract: Electrolysis is a method of purifying impure metals. The crude metal that needs to be refined serves as the anode in an electrolytic cell while the metal that has been purified serves as the cathode. To ensure that the metal at the cathode is reduced extremely specifically, the electrode potential is chosen. Impurities are left behind in the electrolyte liquid as the metal is transferred from theunrefined metal of the …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 1, 2022 · pp. 5–9 Read article
-
Recycling Multilayer Materials: Discovering Mechanical Parameters for Engineering Applications
Abstract: Multilayer materials have been widely used in various applications such as packaging, electronics, and construction industries. However, the disposal of these materials is becoming a significant environmental concern due to their non-biodegradable nature. Therefore, the recycling of multilayer materials has become an essential aspect of sustainable waste management. The mechanical characteristics of materials recycled from multilayer products were examined in this study. The focus was on determining the impact of …
Published in International Journal of Metallurgy and Alloys · Vol. 8, Issue 2, 2022 · pp. 43–47 Read article
-
Enhancing Soil Stabilization with Chitosan Biopolymer Integration
Abstract: In this work, clay soil is stabilized using a biocompatible chitosan solution derived from shrimp shell waste. The biopolymer chitosan has attracted attention in the field of geoenvironmental studies because of its possible applications in the absorption of heavy metals, the mitigation of soil erosion, and the improvement of hydraulic conductivity. However, a thorough investigation into its impact on the mechanical properties of soil has not yet been conducted. A …
Published in International Journal of Metallurgy and Alloys · Vol. 9, Issue 1, 2023 · pp. 35–56 Read article
-
Nanocatalyst for Transesterification of Fatty Acids into Biodiesel
Abstract: Global fuel consumption is increasing exponentially due to the ever increase in rate of industrial development. The continued usage of fossil fuels leads to severe environmental concerns and poses threat to the entire mankind. Biodiesel has gained more attention due to the rapid exhaustion of the fossil fuels and increase in price of conventional petroleum products. Transesterification of fatty acids from animal fat, vegetable oils, waste cooking oil, algae and …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 1–4 Read article
-
Regulation of Ca(OH)2 Concentration in the Hardening System “Gypsum Binder-Portland Cement” By Introducing Ash and Slag Additives when Producing Composite Gypsum Binders (CGB)
Abstract: This paper presents the results of the research and development of composite gypsum binders (CGB) based on technogenic raw materials in the form of ash and slag mixtures of fuel wastes, which reduces the consumption of Portland cement clinker up to 85% in comparison with traditional composite binders. The optimal compositions of the CGB are proposed. The impact of the type of mineral additives of technogenic origin and superplasticizer on …
Published in International Journal of Composite and Constituent Materials · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Hydraulic Flushing Flux Enhancement Techniques in Membrane Separation Processes: A mini Review
Abstract: Looking into current scenario of the wastewater generated from the allied industries which leads researcher and industry persons to reclaim the water to certain extent. Conventional methods removes the pollutants and toxics to maximum level but quality of water is the must requirement for the industries to work efficiently. Membrane separation processes play vital role in rectifying the conventional method by replacing them to some extent or by hybrid mixture. …
Published in International Journal of Composite Materials and Matrices · Vol. 4, Issue 2, 2018 · pp. 1–3 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article
-
Experimental Investigation of Visco-Elastic Behavior for Ecovio F Film C2203 Biopolymer Melts
Abstract: The visco-elastic behavior of biopolymers fluid are significantly interested in their internal structure, thus, it has been experimentally investigated for various industrial applications. This paper studies the characterization of (Ecovio F Film C2203) biopolymer because of their characteristics and importance in different fields of environment and health. Two form of rheometers instruments have been used at temperatures between (140 - 220) ˚C to describe the visco-elastic behavior of (Ecovio F …
Published in International Journal of Polymer Science and Engineering · Vol. 4, Issue 2, 2018 · pp. 24–33 Read article
-
Synthesis and Characterization of Poly(vinylpyrrolidone) / Starch / Dimethylacrylamide Hydrogel by Gamma Radiation and Its Application in Basic Fuchsin and Methyl Orange Removal
Abstract: Gamma radiation was used to create a number of PVP/Starch/Dimethylacrylamide (PSD) based hydrogels. Investigated were the effects of several parameters, such as radiation dose, material composition, and pH, on the characteristics of hydrogels, such as gel content and swelling behavior. Radiation doses ranged from 10 to 25 kGy, and 10 kGy was determined to be the ideal dose. Investigations on the impact of dimethylacrylamide (DMA) composition on swelling were investigated. …
Published in International Journal of Polymer Science and Engineering · Vol. 9, Issue 2, 2023 · pp. 1–20 Read article
-
Fabrication of Grain Cleaning Machine
Abstract: Agriculture plays a significant role within the Indian economy. Indian agriculture is on the horizon and one in every of the foremost challenges is to reverse the decline in agriculture. The post-harvest cereals contain various amounts of non-grain (MOG) materials like stone, pod, trunk and trash. MOG classification is very important to boost the standard of the food. The development of the grain separation machine produces a review of previous …
Published in International Journal of Mechanics and Design · Vol. 6, Issue 1, 2020 · pp. 17–20 Read article
-
Electronic Seed Drill Machine
Abstract: Our Electronic Seed Drill Machine will help to accurately sow seeds in the correct position and help to avoid wastage of seeds. This machine will be useful for both rabi and kharif crops sowing. A plan to mulch these areas with dirt, this takes place at a regulated depth and tempo. In most cases, the earth covers the seeds after they have been sown at the proper level and rate. …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 1, 2023 · pp. 29–34 Read article
-
Design and fabrication of Garbage Cleaner Vehicle
Abstract: The development and construction of a partially automatic electronic rubbish collecting bot vehicles is the subject of the aforementioned study proposal.. The job was completed in light with the existing state of our storage areas, they are filthy with garbage, pollution, and dangerous chemicals. This machine's design to clean the surface of the waste was based on that. To supply the products more quickly, nearly every step of manufacturing is …
Published in International Journal of Mechanics and Design · Vol. 9, Issue 1, 2023 · pp. 35–41 Read article
-
Lean Manufacturing
Abstract: An important goal of lean manufacturing is to speed up response times from suppliers and consumers as well as times spent in the production system. It has a tight relationship to another idea known as just-in-time manufacturing (JIT manufacturing in short). Just-in-time manufacturing prioritises productivity, effectiveness, and waste reduction for the producer and supplier of goods in an effort to match output to demand by only supplying items that have …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 1, 2022 · pp. 23–26 Read article
-
Green Manufacturing Implementation Framework for Ethiopian Manufacturing Industry
Abstract: In the current period of fierce market competition, industries are introducing efficient production processes to ensure their existence. The rate of contamination of natural resources such as water, soil, and air are increasing due to industrial waste. Rapid environmental degradation has demanded that enterprises worldwide adopt environmentally responsible manufacturing practises. Green manufacturing methods were envisaged and implemented in this context by large-scale firms in industrialised countries. Managing green manufacturing practises …
Published in International Journal of Manufacturing and Materials Processing · Vol. 8, Issue 2, 2022 · pp. 1–5 Read article