Search
171 articles for “cement”
-
Impact of Additives on the Split Tensile Strength of Roller Compacted Concrete
Abstract: Additives are implemented as partial replacement of Portland cement in concrete to enhance the required physical properties. In the present investigation, roller compacted concrete slab samples were prepared using gap and dense aggregate gradation. Three percentages of Portland cement were adopted, (16, 12, and 10) % by weight of aggregates. Three types of additives, (hydrated lime, fly ash, and fumed silica) were implemented as partial substitute of Portland cement. Core …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 9–15 Read article
-
Effect of Colloidal Nanosilica on High Strength Rice Husk Ash Concrete
Abstract: Nowadays, supplementary cementitious materials (SCMs) are used in concrete because it reduces CO2 emission during. The husks, which are production of cement, reduces cement contents, improve workability, increase strength and enhance durability. Pozzolanic reaction takes place when siliceous or aluminous material comes in contact with calcium hydroxide in the presence of moisture to form compounds possessing cementitious properties approximately 50 percent cellulose, 30 percent lignin and 20 percent silica, are …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 33–43 Read article
-
Mechanical Behavior of Fly Ash Concrete A Critical Review
Abstract: Concrete structure is the most common all over the world. Cement is the major ingredient of concrete. Though the raw materials needed for manufacture of cement are available in most parts of the world, many countries have severe shortage of cement, although their needs are vast. The search for suitable substitute for cement, either partially or fully, has thus become a challenge for planning the development of many of the …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 29–43 Read article
-
Studies of Technical Grades from Rice Husks
Abstract: Rice husks studied in this review to subject different accessible performance in lieu of abated the dispose with no pollution. Rice husk ash in mesoporous form added in soap during preparation. Other formations appeared to process for ceramics, catalysts, adsorbing material, nano-mater and carbon added cementation products. Rice husk is by-product from rice mill subjectively reused to access another staged mission to form by-products. Firing of rice husk studied other …
Published in International journal of Nanobiotechnology · Vol. 6, Issue 2, 2020 · pp. 25–30 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
Potential of Limestone Powder in the Production of Self Compacting Concrete
Abstract: Self-compacting concrete (SCC) is a cutting-edge building material. It's a smooth, durable concrete that fills the formwork completely. The SCC needs a lot of powder to perform well (mostly cement). However, increasing the cement content is impractical and may result in greater hydration heat and drying shrinkage. This project studies the effect of limestone powder (LSP) on the fresh and hardened appearances of SCC. To evaluate the samples with and …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 7, Issue 2, 2021 · pp. 17–23 Read article
-
Multiscale Modeling of Elastic Properties Based on Micromechanics
Abstract: This paper addresses multiscale firmness homogenization procedure to separate macroscale versatile mechanical properties of four sorts of manageable cements from their nanoscale mechanical properties. Nine distinctive practical solid blends were considered. A model in light of micromechanics was utilized to homogenize the versatile properties. The solidified bond glues were homogenized by three systematic strategies in view of Self-Consistent and Mori-Tanaka plans. The proposed multiscale strategy consolidates progressed trial and scientific …
Published in International Journal of Composite and Constituent Materials · Vol. 2, Issue 2, 2016 · pp. 8–10 Read article
-
Vacuum Dewatering During Concreting: Modern Construction Method
Abstract: In the RCC construction, water–cement ratio is detrimental for concrete. We always try to restrict the water–cement ratio because we want structure achieve its higher strength rather it is necessary for structure life. For the chemical reaction which is generated in cement and water, water–cement ratio of less than 0.38, whereas the adopted water–cement ratio is much more than that mainly because of the requirement of workability. After the requirement …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 6–12 Read article
-
Study of Durability Properties of Bagasse Ash Concrete and Its Behaviour when Exposed to Elevated Temperatures
Abstract: The major driver for the economic growth and social progress of any country is its construction sector. In India, it is estimated that construction contributes 8% to 9% to GDP and this share is likely to increase in coming years. High-performance concrete made from ordinary Portland cement (OPC) and various supplementary cementitious materials (SCM) are alarmingly finding their use in construction worldwide. Bagasse ash (BA), one such SCM, the agro-industrial …
Published in International Journal of Construction Engineering and Planning · Vol. 8, Issue 2, 2022 · pp. 51–62 Read article
-
Compressive Strength and Chloride penetration on Semi-Lightweight Concrete Made Up of Artificial Aggregates
Abstract: This paper deals with the properties of semi-Light weight concrete prepared by using Light weight wood ash pellets as coarse aggregates. It can be prepared by varying the cement content from 300 to 450 kg/m3. Optimum design mix can be finalised by studying the engineering properties such as compressive strength, split tensile strength, young’s modulus and rapid chloride penetration test. Various trial mixes have been attempted in the laboratory by …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 14–25 Read article
-
Review on Graphene Oxide Composites
Abstract: Addition of inert nanomaterials to cement composites is gaining interest. Graphene Oxide is one such inert additive which can impart modifications in cement hydration, improve strength and durability of cement based materials. Research on graphene oxide (GO) is intensified in the recent years for its versatile applications emanating from its very small particle size. This comprehensive review will provide the fundamentals of GO and understand the effects of GO addition …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 2, Issue 1, 2016 · pp. 24–30 Read article
-
A review - Inhancing the Performance of Self-Curing Concrete Using Polyethylene Glycol as an Internal Curing Agent
Abstract: Abstract—This study examines the use of Polyethylene Glycol (PEG-400) as an internal curing agent in concrete, offering a sustainable alternative to traditional water-curing methods. The research addresses the challenge of water scarcity in the construction industry by introducing a self-curing system capable of retaining internal moisture to support prolonged cement hydration. PEG-400, a water-soluble polymer, was added to concrete mixes at different dosages to assess its influence on hydration, shrinkage …
Published in International Journal of Concrete Technology · Vol. 12, Issue 1, 2026 · pp. 1–6 Read article
-
Impact of Silica Fume on High-Strength Concrete
Abstract: For many decades, concrete has been the primary material used in construction because of itsreliability under normal conditions. However, certain applications necessitate concrete withexceptionally high compressive strength and durability, particularly in aggressive environments.Consequently, achieving compressive strengths in the range of 60–140 MPa is critical for thesedemanding situations. Silica fume, a by-product of silicon and ferrosilicon smelting processes, hasgained recognition as an effective cementitious material for enhancing concrete properties. Thisdissertation investigates …
Published in International Journal of Concrete Technology · Vol. 10, Issue 1, 2024 · pp. 25–31 Read article
-
Physico-chemical Analysis of Some Soil Sample around Jaypee Nagar Industrial Area in Postmonsoon Season Session 2012–2013 of Rewa, District MP (India)
Abstract: In the present study, various physico-chemical factors were assessed for the whole year during pre- and postmonsoon season session 2012–2013 to determine the impact cement dust on the soil quality around Jaypee Nagar industrial area. Physico-chemical parameters such as pH, electrical conductivity, organic carbon, phosphorus, potassium, CEC, calcium, magnesium, sulphate, are taken. Most of the samples are within permissible limit. The positive correlation was observed among most of the Physico-Chemical …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 2, 2016 · pp. 11–16 Read article
-
Self-Curing of Concrete Incorporated with Polyethylene Glycol
Abstract: Concrete is a combined mixture of cement, aggregates and water with or without suitable admixtures. Curing is the process of sustaining the proper moisture content to stimulate optimum cement hydration immediately after placement and to achieve desirable strength and other properties. In conventional curing of concrete, this is achieved by external supply of water after mixing, placing and finishing of concrete. In practice, the conventional type of curing is very …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 35–48 Read article
-
Mathematical Model to Monitor Concrete Compressive Strength Partially Replaced with Periwinkle and Palm Kernel Shell as Aggregate
Abstract: This research work monitor that application of periwinkle and palm kernel shell as partial replacement for aggregate, the study are carried out applying modeling and simulation techniques, concrete are normally heterogeneous in most cases, but the study try to examine the growth rate of the material on their compressive strength, such process were carried out using these two locally sourced material at different percentage of replacement for aggregate, the study …
Published in International Journal of Construction Engineering and Planning · Vol. 9, Issue 2, 2023 · pp. 6–28 Read article
-
Properties of Green Concrete Using Light Weight Aggregates
Abstract: With the growing distress over the needless exploitation of natural aggregates, synthetic lightweight aggregate produced from the environmental waste is a feasible new source of structural aggregate material. Unique with expanding worry over the inordinate misuse of characteristic totals, engineered light weight total delivered from natural waste is a feasible new wellspring of auxiliary total material. The engagements of auxiliary review lightweight cement minimise remarkably the self-heap of a structure …
Published in International Journal of Concrete Technology · Vol. 4, Issue 1, 2018 · pp. 11–14 Read article
-
Effect of Temperature on mechanical properties of Geopolymer concrete: A Review
Abstract: Concrete is the most widely used material after water in building and construction field. It is the oldest man-made material and is easily available for use at cheaper costs. This material is causing harm to environment on mass extent. OPC i.e. Ordinary Portland Cement is second contributor after automobile industry in Carbon Dioxide emission. This review presents the study of replacement of regular concrete cement with cementitious material like fly …
Published in International Journal of Concrete Technology · Vol. 7, Issue 1, 2021 · pp. 24–28 Read article
-
Study on Analysis and Design in Reinforcement Structure Joints of Water Tank Structure for Safety Human life
Abstract: A water tank is used to store water to surge over the daily requirement. In the construction of concrete structure for the storage of water and other liquids the imperviousness of concrete is most essential. The permeability of any uniform and thoroughly compacted concrete of given mix proportions is mainly dependent on water cement ratio. The increase in water cement ratio results in increase in the permeability. The decrease in …
Published in International Journal of Water Resources Engineering · Vol. 3, Issue 1, 2017 · pp. 16–28 Read article
-
Analyzing the Effect of Rice Husk Ash & Quartz Powder on Mechanical Properties of Polypropylene Fiber Based Concrete Using Regression Analysis
Abstract: Several works were identified with sustainable development have uplifted the improvement of composite binders incorporating Portland cement, industrial, agricultural by- products and partial substitutions to aggregates. One of the most adverse effects of using cement is the emission of CO2 into atmosphere during production and it can be reduced with the effective use of cementitious materials. Several efforts were attempted to make use of supplementary cementitious materials to enhance the …
Published in International Journal of Composite Materials and Matrices · Vol. 7, Issue 2, 2021 · pp. 51–57 Read article