Search
996 articles for “experimental”
-
Passive Capillary Flow of Dyed Ethylene Glycol in the SU-8 based Glass Microfluidic Devices Fabricated by Microfabrication Technologies
Abstract: In this work, total 4 individual SU-8 based glass microfluidic devices are fabricated by the steps of maskless lithography and indirect bonding technique using author’s own hands-on completely. Dyed ethylene glycol (80% red dye, 20% ethylene glycol) is prepared as working liquid. The CMOS camera catching 25 frames per second with a corresponding time-scale resolution of 0.04 second is used to record the surface-driven capillary flow of dyed ethylene glycol …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 37–42 Read article
-
Utilization of Mulberry Methanolic Leaf Extractive (MMLE) for Treating Hypercholesterolemia in Rat, Rattus norvegicus (L)
Abstract: Healthy diet is the foundation for a healthier workforce and lower healthcare costs. The diet therapy for regulation of cholesterol is exerting influence to reduce mortality and morbidity. The Methanolic Mulberry Leaf Extractives (MMLE) (at the rate of 100 and 200 mg/kg body weight) and the standard hypolipidemic medicine Questran were administered through the diet to the rats of hypercholesterolemia (maintained on high cholesterol diet). Treatment was five times per …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 2, 2019 · pp. 44–68 Read article
-
Extraction,Characterization and Optimization of pectin from Banana peel by using Acid Extraction
Abstract: This paper basically focused on the production of pectin from banana peel, an agricultural waste. The production process used in this work was raw material collection from Hawassa City, and characterizing the raw material for its physic-chemical composition. The raw material was prepared and grinded to a averageparticle size of 0.25mm after drying at a constant temperature of 600C. The extraction of oil from the banana peel was conducted using …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 27–48 Read article
-
Essence of Physicochemical Model of the Formation of Negatively Charged Microdispersed Hydrogen Bubbles in the Process of Electrolysis of Water Solutions
Abstract: Electrolytic hydrogen bubbles, formed during the electrolysis of water solutions, have two unique properties: microdispersion and negative charge of their surface, which allow them as a result of an elementary act of flotation to form strong complexes: negatively charged micro dispersed hydrogen bubbles-microscopic solid particle, biological cell, whose floatation to the free surface of water solution due to their increased volume compared to individual components ensures the successful completion of …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 30–42 Read article
-
Design of Batch Reactors for Pulping of Plantain Pseudostem
Abstract: Plantain pseudostem has little application in Africa and constitute major domestic waste and often problematic to manage. It however contains a high content of lignocellulose that can be used for production of pulp. With the geometric decline of feedstock for pulp production due to dwindling wood resources, plantain pseudostem becomes a ready alternative. This study developed design models for batch reactor for the plantain pulping process under isothermal, non-isothermal and …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 1–8 Read article
-
Chemical Synthesis and Characterization of Polyaniline for Supercapacitors Application
Abstract: Various polyaniline (PANI) synthesis methods are reported in the literature, depending on the experimental parameters involved (T, t, doping, and mixing procedure). Herein, three chemical polymerization methods were used to synthesis PANI from aniline monomer: rapid oxidation (OR), controlled oxidation (CO), and interfacial oxidation (OI). The PANI was therefore deposited next by drop casting on a silicon (Si) substrate. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 9–16 Read article
-
The Power of Chemical Modeling: Unveiling Molecular Behavior
Abstract: Chemical modeling has developed as a strong tool for deciphering the complicated behavior of atoms at both the molecular and atomic scales. Researchers can simulate and comprehend the complex dynamics and properties of chemical systems by combining ideas from physics, chemistry, and computer science. The importance of chemical modeling in studying molecular behavior and demonstrates its transformative ability in a variety of scientific disciplines. Chemical modeling, using advanced computational approaches, …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 9–13 Read article
-
Effect of Elephant Grass for the Remediation of Contaminated Swampy and Clay Soils Environment
Abstract: The research on the effect of Elephant grass and effectiveness to enhance remediation of crude oil polluted soil environment was studied. The experiment carried out in order to ascertain the performance of the locally sourced braw material for remediation of the contaminated soil. The physiochemical parameters of the contaminants such as crude oil, as well as the elephant grass in powdered form, swampy and clay soils were determined in terms …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 25–30 Read article
-
Bioethanol Production from Corncob Cellulosic Biomass: RSM and ANN based Optimization for Dilute Acid Pretreatment
Abstract: To increase the yield of fermentable sugars, the complexity of lignocellulosic biomass requires a pretreatment method. Dilute acid hydrolysis was used to efficiently pretreatment corn cobs. The aim of this study was to characterize corncob and investigate the effect of process parameters on total reducing sugar (TRS) yield during dilute acid hydrolysis pretreatment of corncob biomass. The morphology and microstructure of the samples were examined using an X-ray diffraction machine, …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 2, 2023 · pp. 16–34 Read article
-
Modeling the Diffusion Characteristics of Sawdust in Crude Oil Medium
Abstract: Over the years, oil spill pollution has become an important issue of concern due to its serious environmental impact; Therefore natural organic sorbent such as Abura sawdust was used for oil spill cleanup due to its availability, eco-friendliness and low cost, and was selected as the preferred sorbent and the effects of sorbent contact time and its particle size on oil adsorption capacity were evaluated for the systems of dry …
Published in International Journal of Environmental Chemistry · Vol. 4, Issue 1, 2018 · pp. 44–57 Read article
-
Removal of Methyl Orange from Wastewater Using Composite Material
Abstract: The textile industry is one of the pollute activities that most consume water. Industrial dyes are dangerous pollutants, resulting from the textile industry. The textile dyes significantly increase inhibit plant growth, enter the food chain, promote toxicity, and carcinogenicity. The removal of textiles dyes is usually proposed via adsorption represents a sustainable solution. A composite material was prepared by polystyrene in combination with commercial activated carbon. A series of experiments …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 1, 2020 · pp. 42–46 Read article
-
Determination of the Flow Velocity Resistance in Non- Submerged Woody Plants
Abstract: Vegetation on the bank of a river or stream has a major influence on resistance, velocity distribution,and turbulence force. The resistance to flow in open channels depends on different channel and flow parameters. Out of many factors, vegetation is the mainly important parameter in open channels. In this study have been five points to measure the velocity in the channel. The experimental work has been done by a rectangular channel …
Published in International Journal of Environmental Chemistry · Vol. 8, Issue 1, 2022 · pp. 1–7 Read article
-
Biological Recovery of Soil Impacted by 30,000 ppm of Gasoline
Abstract: Gasoline is a mixture of low and high molecular weight hydrocarbons, which spilled on the soil due to fuel theft, causes environmental pollution. In consequence the Mexican standard, called NOM-138- SEMARNAT/SSA1-2012, establishes a maximum allowed limit of 4,400 ppm gasoline in soil. Therefore, the objectives of this research were i) biological recovery of the soil impacted by 30,000 ppm of gasoline, by biostimulation with commercial detergent 123® plus a mineral …
Published in International Journal of Environmental Chemistry · Vol. 9, Issue 2, 2023 · pp. 31–39 Read article
-
Effect of TiO2 on HER Activity of Electrodeposited Zn–Ni Coatings
Abstract: This paper demonstrates the improved electrocatalytic behavior of Zn–Ni alloy coatings for alkaline hydrogen evolution reaction (HER), due to addition of TiO2 nanoparticles into the bath. Zn–Ni alloy coatings have been electrodeposited galvanostatically on copper, with wide compositional range (2.31–7.91 wt. % of Zn) at different current densities (c.d.) between 2.0 and 5.0 A dm-2. The electrocatalytic behaviors of all coatings have been studied for alkaline HER in 1.0 M …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 1, 2017 Read article
-
Synthesis of Zeolites: An Overview
Abstract: Zeolites are microporous, aluminosilicate minerals commonly used as commercial adsorbents and catalysts. Zeolite synthesized from CFA is a minor but interesting product, with high environmental applications. Zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. This paper provides an overview on the methodologies for zeolite synthesis from CFA, and a detailed description of conventional alkaline conversion processes, with special emphasis on the experimental conditions to …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 3, Issue 2, 2017 · pp. 8–14 Read article
-
Predictive Modelling of a Bioreactor for the Production of Ethanol Using Palmwine
Abstract: This research focuses on the feasibility of biochemical technology with yeast cells (Sacccharomycees cerevisiae) for continuous ethanol production from palm wine. This was carried out in a non-isothermal batch reactor at constant room temperature. 1.5L of palm wine solution was reacted with dry active baker’s yeast until reaction was completed. Biomass, ethanol and glucose concentration were sampled every two hours, and kinetic rate parameters for the fermentation calculated using concentration/time …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 5, Issue 2, 2019 · pp. 1–8 Read article
-
Green Synthesis of Nickel(II) and Zinc(II) Complexes of Bis(Imine) Schiff base Derived from o-vanilline and m-phenylenediamine.
Abstract: The synthesis of Schiff base ligand derived from aromatic aldehyde (o-vanillin) and m-phenylenediamine via liquid-assisted mechanochemical synthesis (LAG) in the presence of small amount of dimethylformamide were reported. The Schiff base complexes of Ni(II) and Zn(II) were also synthesized mechanochemically and characterized using infra-red spectroscopy, thermogrametric analysis, energy dispersive x-ray analysis, powder x-ray diffraction, UV-Visible analysis, conductivity measurement, magnetic susceptibility measurement and CHN, micro-analysis. Infrared spectral study indicated a strong …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 6, Issue 1, 2020 · pp. 31–43 Read article
-
Theoretical Insights Into Structure, Electronic Properties, and Ion-pair Interactions In Organopalladium Salts [Pd(p-XC6H3CHMeNH2) (tmeda)] [BF4] AND [Pd(p-XC6H3CHMeNH2) (tmeda)] [PF6] (X = H, F, Me)
Abstract: The geometries of organopalladium salts [Pd(p-XC6H3CHMeNH2) (tmeda)] [BF4] and [Pd(pXC6H3CHMeNH2) (tmeda)] [PF6] (X = H, F, Me) (I-VI) have been optimized using BP86 and TPSS density functional at dispersion corrected DFT-D3(BJ) method. The optimized geometries of the salt [Pd(C6H4CHMeNH2) (tmeda)] [BF4] using TPSS functional in methanol slvent is in good agreement with available experimental data. The N1-Ha bond distances are longer than the N1-Hb bonds. The counterion strongly affects the …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 9, Issue 1, 2023 · pp. 11–21 Read article
-
Comparative Studies on Production of Biodiesel from Waste Vegetable Oil (WVO) & Noctiluca Scintillans(NS)
Abstract: The world realized that the main source of energy from crude oil, which leads to the environmental concern and disappeared in few years. That’s how new resolutions are under study looking for alternate fuel to replace the fossil fuels. The research studies have been made in field, but none of which are on a large scale production locally in Oman. Based on scenario, Biomass (algae) can be produced to make …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 5, Issue 1, 2019 · pp. 23–36 Read article
-
CFD-subset-FVM-based MATLAB-simulation of Heat Transfer in High Grade Cold Storage Augmenting Cryogenic Energy Storage System by Circulating Natural Gas as Working Fluid : Conceptual Review
Abstract: Abstract. Cryogenic Energy Storage (CES) improves power grid with renewable intermittent power sources. In CES, off-peak excess electricity liquefies air or natural gas. Cryogen is stored in large dewar tanks for long periods of time. Whenever electricity need is in peak, work is recovered from cryogen by a power cycle using waste heat. Many researchers focus on liquid air energy storage (LAES). But, natural gas is promising working fluid for …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 5, Issue 2, 2019 · pp. 1–5 Read article