All articles
7057 articles
-
Wheat Grain Quality Analysis Using Image Processing
Abstract: Rice and Wheat are two major staple cereals used globally. In India too, both of these crops are cultivated and consumed in large quantities. In this article, we are demonstrating an image processing approach to segregate bad quality wheat seed grains from the good quality. Wheat is not only the source of carbohydrate, but it also contains protein in ample amounts. The protein content in wheat is higher than that …
Published in International Journal of Digital Communication and Analog Signals · Vol. 3, Issue 1, 2017 · pp. 35–42 Read article
-
An Analysis of Biocidal Replacement Viability
Abstract: The antimicrobial impacts of silver particles and silver chloride nanoparticles have been entrenched while the viability of microcrystalline silver chloride has been less contemplated. Certex-AM, a microcrystalline silver chloride item created by Cerion, Rochester, NY, was tried for its antimicrobial properties as a conceivable swap for conventional biocidal methods utilized as a part of water cooling towers. The base inhibitory fixation (MIC) of the compound was resolved utilizing a microtiter …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 1, 2017 · pp. 12–15 Read article
-
Biosynthesis of Chitosan mediated nanoparticles for Preservation of Food and Its Antimicrobial activity
Abstract: In this study, chitosan nanoparticles were synthesized from chitosan polymer by ionic gelation method. The chitin was first extracted from Saccharomyces cerevisiae and then deacetylated to chitosan. The presence and characterization of chitosan nanoparticles was investigated by UV-Visible Spectroscopy (UV) and scanning electron microscopy (SEM). The antimicrobial property of these chitosan nanoparticles were studied against E.coli, S.aureus, S.typhi, P.aureginosa, C.albicans and A.niger and compare with chitosan polymer. CSNPs showed higher …
Published in International journal of Nanobiotechnology · Vol. 3, Issue 1, 2017 · pp. 16–24 Read article
-
A Review on Experimental Investigation of Fibre Reinforced Metakaolin-Based Geopolymer Concrete
Abstract: The development of new binders, as an alternative to Portland cement (PC), by alkaline activation, is a current researcher’s interest. As Concrete is the most commonly used material for construction. The worldwide production of cement has greatly increased after 1990. Production of cement results in a lot of environmental pollution as it involves the emission of CO2 gas. There are many ways to which we can reduce environmental pollution (carbon …
Published in International Journal of Concrete Technology · Vol. 3, Issue 1, 2017 · pp. 44–55 Read article
-
Break Extension and Possibility of Debonding in Encapsulation-Based Self-Healing Materials
Abstract: The breakage of containers upon split proliferation is vital for accomplishing split mending in embodiment based self-recuperating materials. A mesomechanical model was produced in this review to reenact the procedure of split proliferation in a framework and the capability of debonding. The model utilized the augmented limited component technique (XFEM) consolidated with a firm zone demonstrate (CZM) in a two-dimensional (2D) setup. The arrangement comprised of a vast grid with …
Published in International Journal of Energetic Materials · Vol. 3, Issue 1, 2017 · pp. 1–4 Read article
-
FABRICATION AND EVALUATION OF VINYL ESTER RESIN BASED HYBRID COMPOSITES
Abstract: Jute is most widely used natural fiber in combination of various polymer because of easy availability, low environment impact, low density, low production cost, satisfactory mechanical properties and usage in wide range of applications. Mechanical properties of fibers are depending upon various factors such as fiber length, fiber orientation, fiber contact etc. In the present study, composite of Jute (J) and Glass fiber (G) have been fabricated using hand lay …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 26–31 Read article
-
Detection of Trans Fats in Oils
Abstract: Today’s society is highly concern about their health which focuses our efforts in one direction that is how to eliminate harmful elements from our daily diet. One of them being Trans fatty acids. Detections of these can be done by various methods, but most of them are lengthy and tedious with varying accuracy. This reason has been the driving force for development of alternative methods to find accurate measurements. In …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 3, Issue 1, 2017 · pp. 7–14 Read article
-
Simplified Models for Some Thermodynamic Properties of Saturated Water in a Pressurized Water Reactor
Abstract: The properties of water and steam in a pressurized water reactor (PWR) need constant monitoring to understand what goes on in the PWR. Such properties include the thermodynamic properties, namely, specific volume, specific enthalpy, specific entropy and specific heat. This work is focused on calculating these properties of saturated water by using a simplified model within the temperature range that is applicable to PWR. The model parameters for each property …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 1, Issue 1, 2015 · pp. 10–15 Read article
-
Thermodynamic Analysis of an Adsorption Refrigeration System
Abstract: In this paper, thermodynamics analysis of an adsorption refrigeration pair (activated carbon and methanol) at adsorption equilibrium conditions has been proposed. Similar analyses have been done by different scientists for different combinations of adsorbent-adsorbate pairs. Adsorption refrigeration processes normally occurs in physical adsorption condition and activated carbon molecules being nonpolar in nature, micropores approach of adsorption (Polanyi’s micropores theory and D-A equation) has been followed here. Analysis of the adsorption …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 1, Issue 1, 2015 · pp. 1–9 Read article
-
Studies on Phytoplanktons and Their Role in Environmental Monitoring and Management
Abstract: Several parameters are known to affect the quality of environment. These parameters or properties can be physical, chemical or biological. Physical properties of water quality include temperature and turbidity. Chemical characteristics involve parameters such as pH and dissolved oxygen. Biological indicators of water quality typically are the algae and phytoplankton. These parameters are relevant not only to surface water studies of the ocean, lakes and rivers, but to groundwater and …
Published in International Journal of Environmental Chemistry · Vol. 3, Issue 1, 2017 · pp. 30–33 Read article
-
Water heater using cow dung and waste
Abstract: This project has its theme based on best from waste. Here, heat energy is obtained using a fuel which possesses no harm to the nature. Also, the demand for fossil fuels is very high and day-by-day energy consumption across the globe has increased tremendously. This project provides a cost effective and efficient solution to today’s increasing energy demands. In this project, the device consists of a copper pipe coiled throughout …
Published in International Journal of Environmental Chemistry · Vol. 3, Issue 1, 2017 · pp. 25–29 Read article
-
Numerical investigation of hydrodynamics of batch crystallizer
Abstract: In this work, hydrodynamics in a draft tubebatch crystallizer is analysed computationally using Computational fluid dynamics (CFD). The CFD simulations are performed using multiple reference frame (MRF) with sliding mesh approach in transient condition for flow time of 5s using the standard k-ε turbulence model. The flow-field in batch crystallizer is quantified by calculating time averaged velocity profiles along the horizontal line and by analysing the temporal variation of liquid …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 24–35 Read article
-
Biosynthesis of Nanoparticles : Revi
Abstract: Nanotechnology can be defined as the characterization, exploration and application of nanosized (1-100nm) materials for the development of science. Though chemical methods continue to be analyzed for the shape and size controlled synthesis of metal nanoparticles, they can be nocuous to the environment due to the use of toxic chemicals. Research erstwhile has demonstrated that utilization of biological organisms majorly microorganisms has been emerging as a novel and unique method …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 1, 2017 · pp. 28–35 Read article
-
STUDY OF NANOFLUIDS AND THEIR APPLICATION IN HEAT TRANSFER
Abstract: Heat transfer enhancement has always been the area of improvement. A large amount of research is going by changing the design, shape and size of the devices which requires high quality materials. Nano-fluids can serve this purpose very correctly, because of their high heat transfer capability. Nano-fluids have higher thermal conductivity and higher surface area to volume ratio which helps in increasing the heat transfer. Nano-fluid thermal conductivity models are …
Published in International Journal of Nanomaterials and Nanostructures · Vol. 3, Issue 1, 2017 · pp. 22–27 Read article
-
Transient Architecture – Redefining Paradigms
Abstract: A concrete notion has always been held in the minds of people that architecture is when it is monumental. This philosophy is embedded in minds because of the eternal buildings that bedazzle every passing generation but does that mean that now when the times have changed and when life is all about fast pace, one cannot celebrate transient architecture which conveniently fits into the demands of the modern life? This …
Published in International Journal of Landscape Planning and Architecture · Vol. 3, Issue 1, 2017 · pp. 38–43 Read article
-
Vertical Landscaping – A Tool for Sustainable Tall Buildings in Tropical Climates
Abstract: With rapid urbanization there has been an ever increasing demand for office and housing space in cities, resulting in taller building typologies. The large concentration of development in urban centers causes an imbalance to the ecology of the place as it replaces vast quantities of natural reserve and vegetation. In recent decades, this has triggered many environmental issues, the city has become more aware and urban planners are willing to …
Published in International Journal of Landscape Planning and Architecture · Vol. 3, Issue 1, 2017 · pp. 29–37 Read article
-
Remedial Garden: Healthy Environment with Medical Plants in Landscape
Abstract: The Persian garden is a system including natural elements which can prepare the physical needs beside the psychological and remedial parameters. On the other hand, after recognizing disadvantages of chemical drugs and lacking the information about the advantages of medical plants it is clear that people need to know about these plants and have some places for serving them these plants. Regarding the quality of Persian gardens, using the healing …
Published in International Journal of Landscape Planning and Architecture · Vol. 3, Issue 1, 2017 · pp. 19–28 Read article
-
A Review on the Properties of Polymeric Micelles
Abstract: Lately, polymeric micelles have pulled in a considerable measure of consideration as far as their particular conveyance of hydrophobic payload to the objective site. Polymeric micelles are viewed as more steady than their surfactant partners and can drag out flow times in vivo and their particular gathering in the tumoral tissues. They can viably solubilize little hydrophobic medications in their internal most hydrophobic center while their external hydrophilic shell can …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 22–25 Read article
-
Study of Dynamic Mechanical and Thermal Properties of Poly(Ether Ether Ketone) Carbon Nanotubes
Abstract: The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic-mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and premixing under mechanical treatments in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing …
Published in International Journal of Polymer Science and Engineering · Vol. 3, Issue 1, 2017 · pp. 1–21 Read article
-
Manufacturing and Recycling of Plastic Versus Paper bags: Implications on the Environment
Abstract: Disposable bags although convenient for daily use but they have several risk factors associated when it comes to the environment. As per the estimates of Environmental Protection Agency, approximately five hundred billion and one trillion disposable bags are used each year around the world. Disposable bags and other bags used for day-to-day need are available in diverse types, based on the material they are made of. Here, is an outline …
Published in International Journal of Environmental Chemistry · Vol. 3, Issue 1, 2017 · pp. 9–12 Read article