Search
2000 articles for “SP” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Study of Groundwater and Surface Water Remediation
Abstract: Groundwater remediation is the process of treating contaminated groundwater by removing contaminants or converting them to harmless chemicals. Water that saturates the pore space in the subsurface and is located beneath the ground surface is known as groundwater. Between 25% and 40% of the world's drinking water comes from boreholes and dug wells. Farmers need groundwater to irrigate crops, while industry use it to make everyday items. Even though most …
Published in International Journal of Green Chemistry · Vol. 7, Issue 2, 2021 · pp. 21–26 Read article
-
Nucleotides from radio-activated wastes
Abstract: AbstractThis article summarizes some formatives over waste generation in atomic reactors. Sponge or foam ceramics-in-glasses are used to entrap waste radio-nuclear products to dispose-in-pose scripture for other forms. Filtering has well known method to separate solid radio-in-nuclide forms from liquids even though inertia modes of resisting method has suggestive approaches to activate separation of particles by mass from sensing systems. Analysis of wastes has showed either ceramic particulates or particle …
Published in International Journal of Chemical Separation Technology · Vol. 6, Issue 2, 2020 · pp. 1–5 Read article
-
Chemical Separation Techniques
Abstract: The compound partition is utilized to decrease the amount of possibly harmful or risky materials released to the climate. Also, divisions that lead to reuse, recuperation, or reuse of materials likewise forestall release. It can help with settling a portion of the natural difficulties, so it turned out to be more significant for scientists, specifically, natural trained professionals. Subsequently, this article expected to assortment data about the compound partition to …
Published in International Journal of Chemical Separation Technology · Vol. 7, Issue 1, 2021 Read article
-
Significance of the Malondialdehyde (MDA) Bioassay Methods in Lipid Peroxidation
Abstract: Along with all the metabolic reactions, the cell cytoplasm is engaged in the process of production of the free radicals and reactive oxygen species (ROS). The overproduction of reactive oxygen species in cell cytoplasm leads into the condition of the oxidative stress. This situation may also be the results of the combination of excessive formation of radicals derived from oxygen or nitrogen or both. Cellular components may be attacked in …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 2, 2019 · pp. 10–22 Read article
-
Iron Pillared Clay for Sorption of Toluene in Aqueous Solution: Kinetics and Equilibrium Studies
Abstract: The adsorption of toluene using unmodified and Fe-pillared clay were investigated in this study using UV/Visible, FT-IR spectroscopic measurements and batch adsorption process. The framework vibration of the clay before and after pillaring were determined using FTIR spectra. Effect of Contact time and initial and various concentration of toluene at constant temperature were investigated. The experimental data were studied using equilibrium isotherm (Langmuir and Freundlich) and kinetics models (pseudo first …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 1–10 Read article
-
Physico-Mechanical Performance of Waste Plant Fiber Reinforced Thermoplastic Composites for Automotive Applications
Abstract: To maximize the interfacial bond strength, it is necessary to investigate the direct relationship between the degree of fiber-matrix adhesion and the mechanical and fracture behavior of composites. In this work, the strength of the interfacial bond between polypropylene (PP) and waste plant fiber (Dharose plant fiber, DF) that have been subjected to ultraviolet radiation (UV) was established. By using hot press molding, unidirectional composites of PP with dharose plant …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 14–24 Read article
-
Evaluation of Some Trace Metals (Zn, Cd, Cu and Pb) in Sewage Sludge Samples Taken from Some Pumping Stations in Benghazi-Libya
Abstract: Due to the little data available on the levels of trace metals concentration in sewage sludge in and around Benghazi city, it was necessary to determine the current concentration, composition, distribution and sources of trace metals in the sludge of different wastewater treatment plants. Accordingly, raw sewage sludge samples collected from sixteen wastewater-pumping stations at Benghazi city have undergone evaluation of pH and some trace metals concentrations (mainly Zn, Cd, …
Published in International Journal of Environmental Chemistry · Vol. 6, Issue 2, 2020 · pp. 13–19 Read article
-
Synthesis and Characterization of Cadmium exchanged Sodalite
Abstract: Cadmium derivative of chloro sodalite, has been synthesized at low temperature by hydrothermal method. The sodalite is characterized by IR, X-ray powder diffraction and SEM. The Cd derivative was obtained by facile exchange of cadmium for sodium in chloro sodalite using a solution of cadmium nitrate in Teflon autoclaves at 100oC. The IR spectra of parent gallo silicate chloro sodalite and cadmium exchanged chloro sodalites shows three kinds of IR …
Published in International Journal of Chemical Synthesis and Chemical Reactions · Vol. 2, Issue 1, 2016 Read article
-
Kinetics and Mechanism of Ruthenium(III) Catalysed Oxidation of L-Arginine by Periodate in Alkaline Medium
Abstract: The kinetics of the ruthenium(III) catalysed oxidation of L-arginine by periodate was studied spectrophotometrically in alkaline medium at 280 nm and at a temperature 35 ± 0.1°C. It was found that the reaction is first order with respect to [catalyst] and [periodate]. The reaction showed fractional order dependence on [substrate] and [alkali]. The oxidation product of the reaction was found to be aldehyde. The anionic species of arginine (Arg) is …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 2, Issue 1, 2016 · pp. 12–20 Read article
-
Detection of Trans Fats in Oils
Abstract: Today’s society is highly concern about their health which focuses our efforts in one direction that is how to eliminate harmful elements from our daily diet. One of them being Trans fatty acids. Detections of these can be done by various methods, but most of them are lengthy and tedious with varying accuracy. This reason has been the driving force for development of alternative methods to find accurate measurements. In …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 3, Issue 1, 2017 · pp. 7–14 Read article
-
Examination of conversion of Ethanol into Diethyl – Ether Product
Abstract: Investigation was conducted to examine the rate of diethyl-ether production from ethanol using the approach of vapour-phase dehydration. The following functional parameters were examined to determine the significance on the production of diethyl-ether from ethanol on the concept of vapour-phase dehydration. The functional parameters are space time, space velocity, heat generated per unit volume, reactor length, weight of catalyst and fractional conversion. The result obtained from the investigation demonstrates the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 1, 2019 · pp. 10–18 Read article
-
AN OVERVIEW OF OPERATION SYSTEM ORDER FOR DC- DC CONVERTER USING PULSE- WIDTH MODULATION
Abstract: To achieve the continuous power transmission, the behavior of dc-dc converter using pulse width modulation technique need to be analyzed in different operation modes. In this paper, review of operation system order for dc-dc converter using PWM that controls the power flow path between the source, load and the battery was done. The generator voltage, input frequency and loads demand with several operating states and control strategies are reviewed. The …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 1, 2019 · pp. 38–44 Read article
-
Preparation of Beta Lactam Compounds and Study of Thermodynamically Behavior
Abstract: Several Lactam derivatives have been prepared by condensation reaction of folic acid with (4-chloroacetophenone and 4-hydroxyacetophenone) in ethanol. Then the resultant compounds (1,2) react with another Schiff bases by reacting of 4- bromobenzaldehyde with an amino acid (Phenylalanine, Tryptophan, Tyrosine and Histidine) to give bis-β-lactam rings. The structures of target compounds were characterized by many spectroscopic methods including NMR, FTIR technique and their melting points. The β- lactam derivatives were …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 5, Issue 2, 2019 · pp. 9–15 Read article
-
Design of a Plug Flow Reactor for Production of Refrigerants from Natural Gas Chlorination
Abstract: The design of a plug flow reactor and distillation column for the production of refrigerants from natural gas chlorination, was aimed at achieving high purity volume percent of Methyl Chloride (CH3Cl) and Methylene Chloride as desired products. Aspen HYSYS software was used to simulate the reactor. The reaction was carried out at a temperature of 3000C and 1atm Pressure, Methane to Chlorine ratio was set at 1.5:1 to favour the …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 7, Issue 2, 2021 · pp. 10–22 Read article
-
Laws of Thermodynamics Challenge Greenhouse-Gas and CLIMATE- change Hypotheses
Abstract: The greenhouse-gas hypothesis (GGH), i.e., CO2 is the cause of global warming by ~1K from ~1950-2023, is popularly believed to be established scientific truth. It is generally assumed that heat emissions from global fuel combustion are, by comparison, negligible. An application of the Hess-Gibbs 1st law of thermodynamics, however, shows that the enthalpy (H) output from yearly fossil fuel consumption is seven times greater than the H- increase of hypothetical …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 1, 2023 · pp. 7–19 Read article
-
Runway Orientation Problems – A Case Study of Middle Euphrates International Airport MEIA
Abstract: It has been planned to design and construct a major international airport at the middle Euphrates region of Iraq to support the commercial development plan and serve the pilgrim’s occasional visit to the holly shrine at Holy Karbala and Najaf provinces. The airport site is 30 km west of Karbala at the edge of the great western desert. The design includes construction of two parallel runways of 4500 m length, …
Published in International Journal of Construction Engineering and Planning · Vol. 1, Issue 1, 2015 · pp. 21–28 Read article
-
To Study Mechanical Properties of Concrete by Using Industrial Waste Material
Abstract: Concrete is a very important material with cement, water, aggregate and admixture as contents. Due to increasing pollution and demand of concrete, its production should be environmental friendly. In this study, we emphasize on environment friendly concrete. The proportion of silica fume was as follows: add 3%–15% in interval of 3% by weight of cement in concrete and fly ash was add 5%–25% in interval of 5% by total weight …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 18–27 Read article
-
Influence of Type and Size of Fine Aggregate on Glass Fiber Reinforced Self-Compacting Mortars (GFRSCM)
Abstract: Abstract This paper addresses the fresh and hardened state behavior of glass fiber reinforced self-compacting mortars (GFSCMs) with various types and sizes of fine aggregate. Mini-slump flow and mini V-funnel tests were performed to evaluate the workability of GFSCMs. Compressive strength, split tensile strength, and flexural strength tests at the end of 28 days of water curing were determined. Water sorptivity tests were conducted on 28-day cured cube specimens. The …
Published in International Journal of Concrete Technology · Vol. 1, Issue 1, 2015 · pp. 63–71 Read article
-
Effect of Replacing Rice Husk Ash with Cement and Granulated Blast Furnace Slag with Fine Aggregates on High Performance Concrete
Abstract: Cement and sand are the basic materials for any concrete construction. Now a day’s due to erosion of rivers and considering environmental issues, there is a scarcity of river sand. Many researchers are finding different materials to replace sand and one of the major materials considered in this study is granulated blast furnace slag (GBFS). In recent times, instead of cement many alternative materials are being used as the binding …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 30–35 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article