Search
1067 articles for “Investigation”
-
Impact of Additives on the Split Tensile Strength of Roller Compacted Concrete
Abstract: Additives are implemented as partial replacement of Portland cement in concrete to enhance the required physical properties. In the present investigation, roller compacted concrete slab samples were prepared using gap and dense aggregate gradation. Three percentages of Portland cement were adopted, (16, 12, and 10) % by weight of aggregates. Three types of additives, (hydrated lime, fly ash, and fumed silica) were implemented as partial substitute of Portland cement. Core …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 9–15 Read article
-
Effect of RHA on Strength of M20 Concrete under both Acidic and Non-acidic Medium by Using Ultrasonic Pulse Velocity Test
Abstract: This work investigates the effects of adding rice husk ash (RHA) on strength of M20 cement concrete under both acidic and non-acidic medium by using NDT i.e., Ultrasonic Pulse Velocity Test. M20 strength concrete was produced using locally available materials. The rice husk ash (RHA) passing 200 micron and 325-micron sieves taken as a 0% - 20% weight of cement & replacement of cement has been done. The RHA effect …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 23–29 Read article
-
Experimental Study on Behavior of various FRP on strength properties of concrete
Abstract: Fibre sheeting is an effective way to repair structures that have become essentially fragile greater than their living expectancy. A lot of research is currently being done on the use of fibre sheets and overlays all around the world. In comparison to traditional repair frameworks and materials, FRP frames are a more cost-effective option. The purpose of this study is to experimentally investigate the behavior of GFRP, CFRP, and BASALT …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 9–13 Read article
-
Study the effect of single and double layers of welded mesh & percentages of steel fiber on different sample
Abstract: Ferrocement is a thin composite structure made a rich mortar mix based on cement with relatively different type of wire mesh. The main objective of this research paper is to constructed a low cost insulation resistance residential building system for urban as well as for ruler development. Ferrocement technologies reduced cost, time and structural load at least 30% to 50%. It is long-lasting and cost-effective due to locally available material …
Published in International Journal of Concrete Technology · Vol. 8, Issue 2, 2022 · pp. 22–30 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
Assessment of Chloride Content in Plaster in Residential Buildings
Abstract: This study investigated the impact of chloride on building as per the age. Concrete samples were collected from buildings of different ages to measure chloride concentration. Findings revealed that chloride content increased with building age, potentially leading to decreased strength and damage. The research identified a significant concern of chloride-induced corrosion in older buildings, as chloride concentration increased with building age. To enhance the durability and safety of aging structures, …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 35–40 Read article
-
A Review on Waste Bakelite as Replacement Partially Over Coarse Aggregate in Concrete Mix
Abstract: Various components in India are made up of Bakelite. Saffron Global Dumping of waste Bakelite through landfill is not allowed due to it effect on soil mass and open burning is not allow because of the emission of harmful gases which cause air pollution. A large space of storehouse requires to store large amount of area for keeping waste Bakelite which becomes management problem of waste. Despite managing waste Bakelite …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 8–13 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
Effect of Varying Shear Velocity on the Mechanical Behavior of Jointed Rock Subjected To Lower Normal Load
Abstract: : This study investigates the effect of shearing velocity on the mechanical behavior of rock joints, namely, the shear strength, residual strength, joint dilation, its surface roughness and the shearing stiffness under the application of lower normal load. The slower rate of shearing plays an important role in creep and the fatigue effect on jointed rock masses whereas, higher rate of shearing is experienced in the cases of dynamic loadings …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 1–11 Read article
-
A Case Study of the Krishna Bhir Slope Failure Disaster: Past and Present Scenario at a Glance
Abstract: The massive landslide disaster of Krishna bhir has been infamous for its dreadful consequences. This huge landslide in the region led to serious socio-economic and environmental disorders in the vicinity of the region, whose negative impacts were reflected soon in the capital city. In addition to the feeble geology, the blasting and drilling activities, rampant deforestation, heavy monsoon rain and the poor drainage are the engenders for weakening the natural …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 21–30 Read article
-
Analysis of Stability of Slope Subjected to Blast Vibrations: A Numerical Modelling Approach
Abstract: Numerical simulation was employed to estimate the dynamic behaviour of the canal slope under blasting load based on the blast vibration field test of Yanakandla Mine, Kurnool District of Andhra Pradesh. Blast vibrations were monitored at different distances and based on the data obtained a regression curve was generated. The study consisted of slope stability analysis of the canal near the mine using Distinct Element Modelling technique in 3DEC software. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 1, 2016 · pp. 39–47 Read article
-
Research Insight on Everest Contaminated by Toxic Metals
Abstract: The goal of this investigation of the Everest was to look at follow component fixations and altitudinal patterns in soil and snow. Mount Everest was chosen since its remote area and amazing height disengages it from limited contamination sources. Soil tests were gathered from Mount Everest by different specialists and the examples were broke down for Pb, Zn, Cd, Ni, Cr, Co, Cu, As, Mn, Hg, and V utilizing inductively …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 2, Issue 2, 2016 · pp. 21–23 Read article
-
Soil Stabilization with Waste Shredded Rubber Tyre Chips
Abstract: Soil stabilization means modification of the soil properties by the addition of any other material to meet the required engineering requirements. Construction engineering structures on the weak soils are considered to be unsafe. The load bearing capacity of these weak soils can be improved by means of various ground improvement techniques. Use of waste shredded rubber tyre chips in geotechnical engineering for enhancing the soil properties has received great attention …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 3, Issue 1, 2017 · pp. 1–7 Read article
-
Optimization of Compressive Strength of Segmental Interlocking Stones
Abstract: The failure of most segmental interlocking stones used as pavement materials is traceable to lack of knowledge of the mix ratios that would optimize the compressive strength of the end products. In this study, the compressive strength was optimized based on Scheffe’s simplex lattice approach. The reliability of model developed was investigated using F-statistic and was found to be adequate. A computer program written in basic language was used to …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 1–7 Read article
-
Taguchis Parameter Design Approach to normal cement concrete mixture proportioning
Abstract: This paper presents the results of the optimization of normal cement concrete mixture using Taguchi approach. The Taguchi experiments were designed using an L9 orthogonal array with three factors and three levels each. The water-cement ratio (W/C), total aggregate-cement ratio (TA/C) and total aggregate-water ratio (TA/W) were treated as the control factors. The effects of the water-cement ratio, total aggregate-cement ratio and total aggregate-water ratio on the compressive strength were …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 4, Issue 2, 2018 · pp. 23–29 Read article
-
A STYDY ON MECHANICAL PROPERTIES UNDER THE INFLUENCE OF FELDSPAR ACTIVATOR ON GEOPOLYMERIZATION OF REDMUD AND GGBS
Abstract: It is well known fact that the Ordinary Portland Cement (OPC) is most important construction material. Keeping in view the hazardous effects of Portland cement on environment, efforts are being put to reduce use of cement in concrete with its partial or full replacement by various waste materials such as Red mud (RM), Ground Granulated Blas Furnace Slag (GGBFS or GGBS), Flyash, Silica fume etc.. Geopolymer Concrete (GPC) is a …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 1–8 Read article
-
Durability Studies on Red mud and GGBS based Geopolymer Concrete
Abstract: The aim of the study is to evaluate the performance of geopolymer concrete and conventional concrete. In the present work, two Industrial by-products such as Red Mud and ground granulated blast furnace slag (GGBS) of 25:75 proportion is used for geopolymerisation. Red mud is a by-product from Alumina industry. GGBS is a by-product from iron industry. To develop a bond between binder and aggregates to form a geopolymer concrete feldspar …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 1, 2019 · pp. 9–17 Read article
-
Neural network based prediction of shear wave velocity for soils
Abstract: The paper presents a study on the prediction of the shear wave velocity (Vs) for all soils using ANN model from cone penetration test data. The input parameters in the obtained of ANN models were vertical effective stress, sleeve friction, cone tip resistance and output was the shear wave velocity. These parameters were considered to construct the ANN model which has 3-2-1 topology in prediction of shear wave velocity. Further, …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 5, Issue 2, 2019 · pp. 23–34 Read article
-
Properties of Bentonite Stabilised with Fluorogypsum
Abstract: This paper presents the properties of the bentonite stabilised with fluorogypsum. For this purpose, commercially available bentonite and fluorogypsum were used in this investigation. The fluorogypsum content and the curing period were varied from 0% to 10 % and 0 to 28 days respectively. Compaction tests results reveal that the maximum dry unit weight increases and optimum moisture content decreases with the increase in the fluorogypsum content to the bentonite. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 43–53 Read article
-
Predicting the Influence of Permeability’s on Settlement of Shallow Foundation
Abstract: Foundation settlement rose as soil permeability increased, excess pore pressure increased with depth, and decreased as shear modulus increased. The expanding soil cycle (shrinkage and expansion) that is principally responsible for foundation settlement is strongly related to water content. The application of modeling and simulation was used to monitor the effect of various soil properties on foundation settlement. But the focus of this study is on Permeability including other soil …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 36–54 Read article