Search
1085 articles for “Samples”
-
Molecular Study of Indian Herbals at Microwave Region Using Time-domain Spectroscopy
Abstract: The dielectric properties of liquids are useful to some extent to understand the liquid structure and molecular interactions therein. The study of dielectric properties of liquid materials is necessary not only to understand the liquid structure but also to provide technical data for practical uses in industry, science, medicine, and engineering. Time-domain spectroscopy (TDS), a spectroscopicmethod used in physics uses brief terahertz radiation pulses to examine the characteristics of matter. …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 8, Issue 1, 2022 · pp. 23–28 Read article
-
Effect of Temperature on Particle Size Mixed Ratio on Petroleum Hydrocarbon Treatment in Packed Bed Unit using Adsorbent
Abstract: The significance of temperature on the potential characteristics of the adsorbent performance in treatment of polluted water medium was monitored by using both room and sun dried bioadsorbent. The research furthermore showcases the effect of particle size of the bioadsorbent in the treatment process and obtained result revealed that the particle size is a contributing factor to the efficiency and the potential in which the rate of Total Petroleum Hydrocarbon …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 9, Issue 2, 2023 · pp. 1–12 Read article
-
Study of Shear Strength Behaviour of Soil With Kaolinite Mixture
Abstract: An experimental testing program was undertaken for evaluating the effect of kaolinite on the strength properties of locally available sand and soil. Strength depends principally upon the content of (1) water, (2) clastic materials and (3) plastic materials. Soils are primarily of two types (1) cohesionless soils in which the strength this produced mainly by the friction of clastic particles against one another, and (2) cohesive soils in which the …
Published in International Journal of Construction Engineering and Planning · Vol. 3, Issue 1, 2017 · pp. 1–5 Read article
-
EFFECT OF SUPERVISION ON PRODUCTIVITY OF CONSTRUCTION INDUSTRY IN NIGERIA
Abstract: Poor supervision in the workplace has been identified to be among the primary obstacles to achieving potential successes by an organization. Insufficient direction is thought not only to be the major causes of revise but also resulted in low productivity, poor safety, lesser working conditions, and little quality of construction industry end product. Also lack of effective supervision is seen as an inevitable feature of the construction process which has …
Published in International Journal of Construction Engineering and Planning · Vol. 4, Issue 2, 2018 · pp. 22–29 Read article
-
Strain-based Fatigue Test of Woven Glass-Epoxy Fabric Composites
Abstract: Strain based fatigue testing of Glass-Epoxy Composite Material in Tension-Tension loading is carried out by using positive load method to evaluate potential crack propagation, fiber fractures, de-laminations, etc. Through continuous stressing in the material, evaluation of life cycle capabilities of glass fiber composites are found which is essential for Research Development, Structural Design, Quality assurance, Modeling and finally Material Specifications. By using an epoxy resin with glass fiber prepared in …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 1, 2019 · pp. 39–55 Read article
-
Design and Construction of an Excavation Supported by Temporary Soldier-Pile Wall for Urban Road Corridor
Abstract: This study addresses a temporary shoring system design used in the construction of an urban road corridor in four areas, with a total length of about 93 m and excavation heights of 5.2 m and 8.5 m. A comparison was made between the original design and a present study. The first condition was calculated manually following Brazilian standards, while the last one was made through computational programs, following the recommendations …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 36–63 Read article
-
Implementation of Airport Construction Management
Abstract: In this article, Micro PAVER is used to analyze present condition of Neil Armstrong airport facilities. It also predicts the future condition and develop ways for pavement maintenance based on available funds and conditions. The airport infrastructure system is divided into several networks, branches, sections, sample units and the types, severity of distresses are identified for those units. Weather, traffic and maintenance are considered to develop prediction model for pavement …
Published in International Journal of Construction Engineering and Planning · Vol. 5, Issue 2, 2019 · pp. 64–75 Read article
-
Determination of the optimum magnetic exposure time for magnetic water concrete
Abstract: The purpose of this study was to investigate the effect of magnetic water on the workability and compressive strength of concrete, and also to find the optimum time for exposing water to magnetic field, for which maximum compressive strength of concrete will be achieved. In this research, water was exposed to magnetic field of 336mT per magnet for a duration of 12, 18, 24, 36, and 96 hours, after which …
Published in International Journal of Construction Engineering and Planning · Vol. 6, Issue 1, 2020 · pp. 34–42 Read article
-
INVESTIGATION OF STEEL FIBER REINFORCED CONCRETE CORBELS BY EXPERIMENTAL AND ANALYTICAL METHOD
Abstract: In the present paper, an experimental results and predicted values by truss analogy method, ACI Building Code (ACI 381-83) provisions for corbels, and method given by Fattuhi is investigated. The concrete used in the corbels is of M-60 grade. Test were carried out on 27 samples of size 150 x 150 x 200- mm were shear span was varied from 175 to 200 as shown in table (5) and concrete …
Published in International Journal of Concrete Technology · Vol. 2, Issue 2, 2016 · pp. 23–29 Read article
-
Strength & Durability of Concrete with Sand Blasting Residue
Abstract: Sand blasting residue (SBR) is commonly obtained as a by-product from chain manufacturing industries. Although it is a waste material but can be used in the mixing of concrete. The work has been divided into two parts. Part 1 covers preparation of M20concreteby substituting SBR as replacement of sand in different percentage such as 40%, 50%, 60%, 70% & 80%. The w/c ratio is kept as 0.5 with adequate does …
Published in International Journal of Concrete Technology · Vol. 6, Issue 1, 2020 · pp. 32–41 Read article
-
Effect of RHA on Strength of M20 Concrete under both Acidic and Non-acidic Medium by Using Ultrasonic Pulse Velocity Test
Abstract: This work investigates the effects of adding rice husk ash (RHA) on strength of M20 cement concrete under both acidic and non-acidic medium by using NDT i.e., Ultrasonic Pulse Velocity Test. M20 strength concrete was produced using locally available materials. The rice husk ash (RHA) passing 200 micron and 325-micron sieves taken as a 0% - 20% weight of cement & replacement of cement has been done. The RHA effect …
Published in International Journal of Concrete Technology · Vol. 7, Issue 2, 2021 · pp. 23–29 Read article
-
Assessment of Chloride Content in Plaster in Residential Buildings
Abstract: This study investigated the impact of chloride on building as per the age. Concrete samples were collected from buildings of different ages to measure chloride concentration. Findings revealed that chloride content increased with building age, potentially leading to decreased strength and damage. The research identified a significant concern of chloride-induced corrosion in older buildings, as chloride concentration increased with building age. To enhance the durability and safety of aging structures, …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 35–40 Read article
-
Experimental Investigation on the Properties of Concrete Replacing Waste Plastic as Aggregates for Solving Waste Management Problem
Abstract: Solid waste management is one of the growing problems of every country. As part of this ongoing program to consider the growing waste management, pollution problem, and prevention framework in India, the Ministry of Environment has suggested various approaches and ways through which we can either recycle or use the most polluting materials like plastic. The present study covers one of the ways through which to recycle one of the …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 17–25 Read article
-
A Review on Waste Bakelite as Replacement Partially Over Coarse Aggregate in Concrete Mix
Abstract: Various components in India are made up of Bakelite. Saffron Global Dumping of waste Bakelite through landfill is not allowed due to it effect on soil mass and open burning is not allow because of the emission of harmful gases which cause air pollution. A large space of storehouse requires to store large amount of area for keeping waste Bakelite which becomes management problem of waste. Despite managing waste Bakelite …
Published in International Journal of Concrete Technology · Vol. 9, Issue 2, 2023 · pp. 8–13 Read article
-
Application of Suitable Admixtures (Lime and RHA) for Improvement of Pavement Subgrade
Abstract: Abstract The quality of a pavement depends on the strength of its sub-grade. The present investigation has been carried out with easily available materials like lime and rice husk ash mixed individually and in combinations with different proportions. The different percentages of lime with respect to weight of dry soil were 2%, 4%, 6%, 8% 10% and for rice husk ash (RHA) were 3%, 6%, 9% and 12%. In each …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 1, Issue 2, 2015 · pp. 14–31 Read article
-
THE STRENGHT PARAMETERS OF SAW-DUST ASH ON THE GEOTECHNICAL PROPERTIES OF LATERITIC SOIL FOR ROAD CONSTRUCTION PURPOSES IN GHANA
Abstract: The strength parameters of saw dust ash on the geotechnical properties of lateritic soil for road construction purposes in Ghana have been investigated. The lateritic soil sample collected was subjected to the following test; Atterberg limits, compaction and California Bearing Ratio Test. The tests were conducted in accordance with BS: 1377 and AASHTO M145 standards. A varying percentage of the saw dust ash in order of 2%, 4%, 6%, 8% …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 1, 2020 · pp. 1–9 Read article
-
Design of Leachate Treatment Plant for Adharwadi Dumping Waste
Abstract: Generation of municipal solid waste (MSW) is increasing due to urbanization, commercialization, and rising population. This result in leachate generation from MSW landfill and dump side. Leachate from dumpsite is the major environmental problem as it causes surface water pollution, ground water pollution and land pollution. Leachate is defined as a liquid that passes through a landfill and has extracted dissolved and suspended matter from it Raghab et al. 2013. …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 6, Issue 2, 2020 · pp. 11–15 Read article
-
Influence of Compaction Technique on Shear Strength of Modified Subgrade Soil
Abstract: The subgrade soil is considered as the foundation for the roadway structure, it is responsible to provide the required stability for the overlaying pavement layers and to limit the deformation due to traffic load repetitions by furnishing homogeneous stress distribution. For poor soil condition, grid reinforcement or Asphalt stabilization techniques are usually implemented to control the deformation and improve shear strength of poor granular subgrade soil. In this work, the …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 1, 2018 · pp. 17–25 Read article
-
Assessment of Pedestrian Walking Speed Through the Religious Occasions in Iraq
Abstract: The design of safe pedestrian facilities usually depends on assessment of pedestrian characteristics and behavior. In this investigation, pedestrian walking speed through the religious occasion has been monitored at three locations: Al-Kadhimiya (Imam Al-Kadim), Najaf, and Karbala (Imam Al-Husain) holy shrines. Video captures of the pedestrians through their walking to the two holy shrines have been prepared and analyzed for walking speed, gender, age groups, and clothing tradition. The pedestrian …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 4, Issue 2, 2018 · pp. 1–13 Read article
-
Factors Influencing Passengers’ Satisfaction of Minicab Services in Akure, Nigeria
Abstract: The effectiveness of the level of satisfaction derived from minicab transport are usually dominated by certain factors. For a developing country like Nigeria, these factors are not often taken into consideration during the planning and designing of minicab transport infrastructures. This study reveals those factors influencing passengers’ satisfaction with minicab services in Akure, Nigeria. The study made used of personal observation and questionnaire to elicit information from 352 respondents through …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 2, 2020 · pp. 10–18 Read article