Search
1211 articles for “well-being”
-
Comparison of Theoretical and Experimental Investigation of Suspened Solids Sedimentation Model in Stagnant Water Environment on Crude Oil Degradation
Abstract: In this investigation the developed model of Ukpaka’s, Stoker’s and Newton’s were compared with the determine values from the experimental data obtained in the suspended solid (TS) in a stagnant water environment. Theoretical and experimental data established in this research demonstrated a good match as well as the evaluated deviation error reveals acceptable range indicating the usefulness of these models in monitoring and predicting the TS sedimentation mechanism in crude …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 1, 2022 · pp. 1–16 Read article
-
Fabrication and Characterization of Paper-Sludge Reinforced Polypropylene Composites
Abstract: The purpose of this research was to identify some physical and mechanical characteristics of polypropylene (PP) composites reinforced using various paper sludge (PS) and PP combinations, as well as to assess the performance of the coupling agent. The physico-chemical characteristics of the waste sludge material from paper manufacturing wastewater treatment sludge (PS) were investigated. The physical and mechanical properties of the composite were examined in the experiment using three levels …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 15–26 Read article
-
Optimization and Control of Evaporative Separation Processes
Abstract: Evaporative separation processes are widely used in various industries, including chemical manufacturing, petroleum refining, and food and beverage processing, to separate components based on their vapor pressures. These processes involve the use of equipment such as distillation columns, evaporators, and membrane-based systems, and are critical for ensuring product quality and process efficiency. However, the complexity of evaporative separation processes and the inherent variability in feedstock composition and quality make it …
Published in International Journal of Chemical Separation Technology · Vol. 8, Issue 2, 2022 · pp. 27–31 Read article
-
Investigation of Root Cause of Fuel Tanker Truck Accident in Nigeria Resulting from Constrain Factors
Abstract: The research demonstrates the investigation of reliability of root cause of fuel tanker truck accident in Nigeria resulting from some constrain factors. The constrain factors considered are age group, ownership status of fuel tanker trucks, drivers’ educational qualification and drivers’ years of experience and the states considered in this research are Lago State (Lagos Park) and River State (Port Harcourt). The study reveals age distribution of drivers in the following …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 1, 2023 · pp. 23–27 Read article
-
Treatment of Petroleum Hydrocarbon: The Concept of Dissolved Oxygen and Iron Characteristics using Adsorbent and Temperature Effect
Abstract: The treatment of petroleum hydrocarbon was monitored by considering the characteristics of dissolved oxygen and iron concentration on the impact of temperature variation on the performance of the adsorbent used. The research revealed that increase in the potential performance of the adsorbent in petroleum hydrocarbon removal enhanced variation in the characteristics of the dissolved oxygen and iron content in the packed bed unit for the treatment of water medium contaminated …
Published in International Journal of Chemical Separation Technology · Vol. 9, Issue 2, 2023 · pp. 13–19 Read article
-
Case Studies On Synthesis Of PLLA Bioplastic Starting From Food And Agricultural Wastes
Abstract: Polylaevo Lactic Acid (PLLA) is an excellent biopolymer that is biodegradable and has characteristics exactly similar to polystyrene. However, at present, the market price of this biopolymer is significantly higher than polystyrene and other synthetic plastics. The major hindrances to the large scale manufacture of this polymer are the lack of availability of a cheap raw material and the overall economy of synthesis of lactic acid from the same. In …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 1, 2015 · pp. 1–13 Read article
-
Statistical and Artificial Neural Network for the Determination of Thermo-Physical Properties of Fomoditine Drug Using Mixed Hydrotropy
Abstract: The experimental determination of thermo-physical properties of fomoditine drug–mixed hydrotrope concentration mixture is very time consuming as well as tedious process. Any tool helpful in estimation of these properties without experimentation can be of immense utility. In present work, other tools of determination of properties of fomoditine drug–mixed hydrotrope concentration blends were tried. A traditional statistical technique of linear regression (principle of least squares) was used to estimate the specific …
Published in International Journal of Chemical Engineering and Processing · Vol. 1, Issue 2, 2015 · pp. 1–6 Read article
-
Investigation of High Corrosion Rate in Oil Production Carbon Steel Pipelines
Abstract: A comprehensive study to identify the causes and the types of internal corrosion of a 16 inch oily water production piping from production wells, which was found to be severely corroded (corrosion rate ≈5.5 mm/year) was considered. The study involves collecting and analyzing of different parameters like production data, flow velocity, CO2 partial pressure, water quantities and water species contents, gas species contents, scale chemical elements, etc. This study is …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 42–51 Read article
-
Biosensor –The Future of Diagnostic Study
Abstract: Electrochemical sensors for several analytes were the first technically proven as well as commersialised biosensors. Electrochemical biosensors have been considered for a long time. Presently, typical platform of transducers based on semiconductors and screen printed electrodes is in practice for construction of biosensors. Among all biocomponents, enzymes or enzyme labeled antibodies are presently the most widely recognized biorecognition devices utilized as a part of biosensor. This article focuses the principle …
Published in International Journal of Chemical Engineering and Processing · Vol. 3, Issue 1, 2017 · pp. 36–40 Read article
-
An Eco-friendly approach for the utilization of waste water for the generation of Bioelectricity
Abstract: Abstract: Microbial fuel cell (MFC) is pollution free, electricity generation device; it represents a new method for eco-friendly source of electricity generation. When we produce electricity by Microbial fuel cell from food factory waste water we obtained pure water as a byproduct. Microbial fuel cell (MFC) is a special type of cell by which we can produce eco-friendly energy in the form of electricity. This paper explores the application of …
Published in International Journal of Chemical Engineering and Processing · Vol. 4, Issue 2, 2018 · pp. 23–26 Read article
-
Development of dynamic model for alkaline water electrolyser: Application to disturbance analysis
Abstract: A dynamic model of an alkaline water electrolyser plant has been developed to study its time dependent behaviour when it is subjected to dynamically varying inputs like changing electrolyte flow, inlet temperature, pressure, current, voltage. Such dynamic conditions are expected to arise during start up and shut down and also when the electrolyser is coupled to a nuclear or renewable electricity source, both of which exhibit time dependent power output …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 11–23 Read article
-
The new method of mixing in an advanced ceramics processing
Abstract: Ceramics for today’s engineering applications can be considered as advanced, new or fine, and utilize highly refined materials. These new or advanced ceramics, when used as an engineering material, possess several properties which can be viewed as superior to metal-based systems. These properties place this new group of ceramics in a most attractive position, not only in the area of performance but also cost effectiveness. These properties include high resistance …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 1, 2019 · pp. 43–47 Read article
-
Nuclear Cogeneration Projects in India : An Assessment of the Current Scenario and Future Prospects
Abstract: Desalination of sea water through thermal and membrane based techniques and production of hydrogen through low temperature water electrolysis at facilities co-located with nuclear power plants are two areas identified for deploying co-generation projects in India in the near term. Nuclear desalination meets the requirements of clean drinking water in and around the nuclear facility, as well as to the in-house demand for high purity water for steam generation and …
Published in International Journal of Chemical Engineering and Processing · Vol. 5, Issue 2, 2019 · pp. 69–89 Read article
-
Studies on sources of lithium
Abstract: AbstractLi is abundant in nature amounting 20 mg/kg of the earth crust. Li widely used in Li ion batteries (LIBs), powerLIBs, chemicals, ceramics, glasses, rubber, reactors, pharmacy, space sectors and alloyed to Al. Sources of Li are natural deposit of minerals, salt crust, brine, salt lakes and ocean basin accumulations. Economical route of extractions are hydrometallurgy and pyrometallurgy. Sorption of selective element by inorganic ion exchange applied for poor containment …
Published in International Journal of Chemical Engineering and Processing · Vol. 6, Issue 2, 2020 · pp. 12–17 Read article
-
Influences of Layered Silicate Modification and Compatibilizers on the Properties of Polypropylene Nanocomposites
Abstract: In this study, polypropylene (PP) organo-layered silicate nanocomposites based on organo-muscovite (OM) were fabricated using co-rotating twin-screw extruder. Polypropylene grafted maleic anhydride (PPMA) and potassium succinate modified polypropylene grafted maleic anhydride (PPKS) were used as a compatibilizer in the nanocomposite system. The influences of layered silicate modification and compatibilizers on the morphological, mechanical, thermal and rheological features of PP/PPMA/OM and PP/PPKS/OM nanocomposites were examined. TEM micrographs were made which showed …
Published in International Journal of Chemical Engineering and Processing · Vol. 7, Issue 1, 2021 · pp. 36–44 Read article
-
Iron Pillared Clay for Sorption of Toluene in Aqueous Solution: Kinetics and Equilibrium Studies
Abstract: The adsorption of toluene using unmodified and Fe-pillared clay were investigated in this study using UV/Visible, FT-IR spectroscopic measurements and batch adsorption process. The framework vibration of the clay before and after pillaring were determined using FTIR spectra. Effect of Contact time and initial and various concentration of toluene at constant temperature were investigated. The experimental data were studied using equilibrium isotherm (Langmuir and Freundlich) and kinetics models (pseudo first …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 1–10 Read article
-
Study of Converting Covid-19 Plastic Waste into Fuel with Automated Temperature Monitoring of Pyrolysis Process
Abstract: Ever since the COVID-19 pandemic began, medical initial responders and health care workers have relied on plastic-based, single-use personal protective equipment (PPE) like masks and gowns to protect themselves from the coronavirus. The result has been quickly growing into a mountain ofplastic waste. Due to the difficulty of their natural disintegration at room temperature, once these plastic materials are released into the environment, they end up in landfills or the …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 1, 2022 · pp. 23–29 Read article
-
Chemical Engineering Analysis of Polymer Composite Creation Using Sawdust, Sharp
Abstract: Polyethylene terephthalate (PET) is known for its general adoption for its lightweight and flexibility and durability nature. It is non-biodegradable and contributes majorly to water and land pollution. The amount of plastic-generated waste is increasing extensively following its usefulness there and the inability of users to properly dump or recycle it has resulted in a big threat to the environment. In this research work an attempt has been made to …
Published in International Journal of Chemical Engineering and Processing · Vol. 8, Issue 2, 2022 · pp. 17–29 Read article
-
Plant Extracts Volume Effects on the Corrosion of MCS Metal Sample using Water-Based as an Inhibitor
Abstract: The effect of water-based extracts of two different samples was examine with respect to volume on the characteristics of MCS metal corrosion inhibition. This research revealed that volume of extracts is a controlling factor in terms of metal corrosion inhibition as demonstrated by the two different water-based extracts investigated. Increase in the inhibiting substance (water-based extract) in terms of volume resulted to decrease in the rate of corrosion of the …
Published in International Journal of Chemical Engineering and Processing · Vol. 9, Issue 1, 2023 · pp. 1–8 Read article
-
Chemical Safety in Solid Waste Management
Abstract: Solid waste disposal is a burning issue now-a-days. Municipal solid waste consists of wastes like paper, plastics, glass, metal, food, etc. These wastes come from various sources, may be houses, industries, hotels, etc. This paper focuses specifically on the chemical waste disposal. It is observed that in society many times illegal dumping of toxic chemical waste is done. This is not a good practice. This can pose serious hazard to …
Published in International Journal of Environmental Chemistry · Vol. 1, Issue 2, 2015 · pp. 4–8 Read article