Search
138 articles for “Corrosion”
-
Experimental Test Results on the Effect of Ultrasonic Waves on Defects in Car Bearings: The Effect of Defect Size
Abstract: To check for defects in car bearings, they are identified and measured by sound waves that are affected by the defect. Based on sound, it is called ultrasound technology because it uses high frequencies. High frequencies are the basis of ultrasound. Two features are useful for low-speed cars, which by definition usually have poor signal tolerance. High frequencies are sensitive to the effects of sound waves. In addition, the ultrasound …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 7, Issue 1, 2021 · pp. 14–21 Read article
-
Analysis of Surface Finish of Different Metallic Materials
Abstract: This study investigates surface processing techniques aimed at achieving a surface roughness (Ra) value of < 2.5 for various materials including gray iron, steel, pure copper, aluminum, and brass. Surface roughness plays a crucial role in determining the functional and aesthetic properties of machined components. The attainment of a specific Ra value demands precise control over machining parameters and selection of appropriate finishing processes. For steel, machining operation grinding followed …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 1, 2024 · pp. 1–12 Read article
-
Induced codeposition of Ni-W alloy coatings using glycerol as additive and their characterization
Abstract: As a promising coating material to replace hard chromium coating, the development of nickel–tungsten (Ni-W) alloy coatings of good corrosion protection is of great interest in surface coating technology. Further, the effect of plating variables, including additive on the composition of alloys of induced co-deposition is more vagarious than in other types of alloy deposition. In this regard, an alkaline citrate bath has been formulated for electrodeposition of Ni-W alloy …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 1–9 Read article
-
Steel in Marine Weather
Abstract: Offshore structures of steel are reviewed after suitable application at onshore. Coat of stitch pad wet weld heat treat is subjected to improve the properties from high strength low alloy steel. Underwater welding with or without environment has modifications from the use of weld heat to heat treat, selection of electrodes containing silicates and polymer agglomerates to induce more heat of weld and penetration. Typical coat crack detect inswing from …
Published in International Journal of Metallurgy and Alloys · Vol. 7, Issue 1, 2021 · pp. 1–8 Read article
-
Experimental Investigation on Shear & Flexural Behavior of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineering structures. However, the long-term durability of conventional steel reinforcement is often affected by corrosion when exposed to aggressive environmental conditions, which can significantly reduce the service life and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer (GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensile …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
Optimizing Gas Turbine Performance: Preventive Measures and Blade Durability Solutions
Abstract: The article explores the various failure mechanisms and preventive methods related to gas turbine blades, which operate under extreme mechanical and thermal conditions. The increasing demand for energy and efficiency in turbojet engines has led to larger and more complex turbomachines. As gas turbine blades are subjected to high operational temperatures, pressure, and stress, they are prone to multiple failure modes, including fatigue, creep, oxidation, corrosion, and erosion. To mitigate …
Published in International Journal of Renewable Energy and its Commercialization · Vol. 10, Issue 2, 2024 · pp. 36–40 Read article
-
Analysis and Design of Structural Components in Offshore and Marine Engineering
Abstract: Offshore and marine engineering play a pivotal role in the global energy market, particularly in the oil and gas industry. The structural integrity of components in such challenging environments is critical, as they are exposed to harsh conditions including high winds, waves, and corrosion. This research paper aims to explore the analytical and design principles for structural components used in offshore and marine engineering, emphasizing materials, loading conditions, failure mechanisms, …
Published in International Journal of Mechanics and Design · Vol. 10, Issue 2, 2024 · pp. 1–6 Read article
-
Nanotechnology in Refractory Materials: Innovations and Applications
Abstract: Nanotechnology has become a focal point of research across diverse scientific fields, including chemistry, medicine, materials science, and engineering. Its integration into refractory products has led to groundbreaking advancements in industries such as steel, glass, casting, and cement, particularly using nanomaterials like nanoparticles, nano additives, and nanostructured materials. This article provides an in-depth examination of the latest developments in monolithic refractories, focusing on how nanotechnology has enhanced their performance, durability, …
Published in International Journal of Metallurgy and Alloys · Vol. 10, Issue 1, 2024 · pp. 7–11 Read article
-
Electrodeposition of Bright Zn–Co–Fe Alloy Coatings on Mild Steel and Their Characterization
Abstract: Sulphate bath having ZnSO4. 7H2O, CoSO4. 7H2O, FeSO4.7H2O and thiamine hydrochloride (THC) and citric acid (CA) in combination, was optimized for deposition of bright Zn–Co–Fe alloy coating on mild steel. Bath constituents and operating parameters were optimized by Hull cell method, for highest corrosion performance against coating. The effect of current density on deposit characters viz., corrosion resistance, hardness, thickness, CCE were evaluated. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) …
Published in International Journal of Analytical and Applied Chemistry · Vol. 2, Issue 2, 2016 · pp. 17–25 Read article
-
Electrochemical impendence study of an AL 8088 /SiC Nano composite immersed in 1M Acid chloride Medium
Abstract: Aluminum Nano composite have received considerable attention among researcher and engineering as a prominent choice material for building and construction purposes. The preference of Aluminum Nano composite as replacement for conventional Aluminum alloy is chiefly due excellent strength to weight ratio .However the problem of accelerated corrosion attributed to the reinforcement particle used in the production of Aluminum Nano composite is well documented in the literature and serves as potential …
Published in International Journal of Applied Nanotechnology · Vol. 4, Issue 2, 2018 · pp. 6–12 Read article
-
Experimental Investigation on Shear & Flexural Behaviour of GFRP-Reinforced Concrete Beam
Abstract: Reinforced concrete (RC) beams are among the most commonly used structural elements in civil engineeringstructures. However, the long-term durability of conventional steel reinforcement is often affected bycorrosion when exposed to aggressive environmental conditions, which can significantly reduce the servicelife and structural performance of concrete members. In recent years, Glass Fiber Reinforced Polymer(GFRP) bars have emerged as a promising alternative reinforcement material due to their high tensilestrength, light weight, and excellent …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 12, Issue 2, 2026 Read article
-
An Insight into the Advanced Composite Materials Used in the Aviation Sector: A Review
Abstract: The creation of complex and specialised materials, such as composite materials, has advanced significantly in the field of aerospace engineering due to technological challenges. Composite materials are currently playing a bigger role in aviation engineering because of its greater strength at a reduced mass, firmness, and corrosion aversion. The study of composite substances used in aviation structures and further advanced composites as building materials are both covered in this paper. …
Published in International Journal of Composite Materials and Matrices · Vol. 11, Issue 2, 2025 · pp. 1–11 Read article
-
Electrolytic Deposition of Zn–Ni Alloy from Acidic Sulphate Bath and Their Characterization
Abstract: A bath containing ZnSO4.7H2O, NiSO4.7H2O, thiamine hydrochloride (THC) and citric acid (CA) has been proposed. Bright Zn–Ni alloy coatings were developed galvanostatically onto mild steel (MS) and their corrosion resistance and other physical properties were studied. THC was found to improve the brightness and homogeneity of the deposit. The dependency of bath composition, current density (c.d.), pH and temperature, agitation on wt.% Ni were tested. Deposition was carried out under …
Published in International Journal of Chemical Engineering and Processing · Vol. 2, Issue 2, 2016 · pp. 19–32 Read article
-
Assessment of Chloride Content in Plaster in Residential Buildings
Abstract: This study investigated the impact of chloride on building as per the age. Concrete samples were collected from buildings of different ages to measure chloride concentration. Findings revealed that chloride content increased with building age, potentially leading to decreased strength and damage. The research identified a significant concern of chloride-induced corrosion in older buildings, as chloride concentration increased with building age. To enhance the durability and safety of aging structures, …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 35–40 Read article
-
Facile Fabrication of Durable Superhydrophobic Coatings on SS 304 for biomedical applications
Abstract: A simple and effective method to fabricate durable superhydrophobic coatings by combining shot-blasting and depositing sol-gel nanocomposite coatings on stainless steel SS 304 substrates has been investigated. Shot-blasting was used for two purposes; 1) as a method of physical modification for creating microscale roughness on the substrate and 2) for improving the adhesion of the nanocomposite coatings deposited thereafter. Organic-inorganic hybrid hydrophobic silica sol was synthesized where silica nanoparticles were …
Published in International journal of Nanobiotechnology · Vol. 4, Issue 2, 2018 · pp. 21–34 Read article
-
Medicinal Application of Nano Composites of Al 8081 Alloy/Tib2 in Acid Chloride and Neutral Chloride Mediums at Laboratory Temperature
Abstract: Nanomaterials are at the leading edge of the rapidly growing subject of nanotechnology. Their precise size-dependent homes make these materials advanced and imperative in any areas of human activity. This brief review tries to summarise the maximum latest developments in the subject of carried out nanomaterials, specially their application in biology and medicine, and discusses their commercial is at ion prospects. This paper evaluates corrosion properties of TiB2/Al8081 alloy immediately …
Published in International Journal of Composite and Constituent Materials · Vol. 6, Issue 1, 2020 · pp. 8–14 Read article
-
Deployment of SEED Sensors Using Biocomposite Substrate Based on RFID Technology
Abstract: As normal assets keep on turning out to be progressively scant internationally, cultivating innovation for agrarian creation to take care of the world has been headed to turn out to be more exact and productive. As of late a sensor has been created to address these necessities by straightforwardly checking the dirt climate remotely to assist with further developing harvest wellbeing and yields. The Sensing Earth Environment Directly (SEED) sensor …
Published in International Journal of Composite and Constituent Materials · Vol. 8, Issue 1, 2022 · pp. 33–40 Read article
-
Evaluation of Culvert design by FRP Rebars
Abstract: Abstract The increasing need for long-lasting and sustainable infrastructure has encouraged the use of innovative materials in civil engineering applications. This study examines the design of a culvert reinforced with Fiber Reinforced Polymer (FRP) bars as a substitute for conventional steel reinforcement. FRP bars provide notable benefits such as excellent resistance to corrosion, a high strength-to-weight ratio, and improved durability. These properties make them especially appropriate for structures exposed to …
Published in International Journal of Construction Engineering and Planning · Vol. 12, Issue 1, 2026 · pp. 30–35 Read article
-
Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation
Abstract: *Author for CorrespondenceSiddesh BE-mail: [email protected] Student, Department of Mechanical Engineering, University B.D.T College of Engineering, Davanagere, Karnataka, India. Received Date: October 29, 2025Accepted Date: November 07, 2025Published Date: November 17, 2025 Citation: Siddesh B. Mechanical and Thermal Performance Comparison of Nylon 6 and PET Spur Gears via Fusion 360 Finite Element Simulation. International Journal of Mechanics and Design. 2025; 11(2): 1–7p. Abstract Polymer gears are increasingly used in engineering applications …
Published in International Journal of Mechanics and Design · Vol. 11, Issue 2, 2025 · pp. 1–7 Read article
-
A look at friction stir processing for making better surface properties
Abstract: Abstract Friction stir processing is a surface properties modification method consequential from friction stir welding. The process uses a non-consumable tool made up of tool steel material. The tool pin and shoulder plunged in the surface of the base material plates and it mover along the predetermined path. The frictional heat stimulates the plastic deformation during the process & enhances the dynamic recrystallization. The process represents an advanced approach that …
Published in International Journal of Manufacturing and Materials Processing · Vol. 11, Issue 2, 2025 · pp. 41–47 Read article