Search
96 articles for “Deformation”
-
Performance Enhancement of Cold Mix Asphalt via FlyAsh Substitution: Marshal Stability Results
Abstract: This study examines the enhancement of cold mix asphalt (CMA) performance through the substitution of fly ash at varying percentages. Specifically, Marshal stability tests were conducted on CMA mixtures with fly ash content of 0%, 2.5%, 5%, and 7.5%. The results reveal a significant increase in peak loads, with the CMA mixture containing no fly ash achieving a peak load of 0.62 kN, while mixtures with 2.5%, 5%, and 7.5% …
Published in International Journal of Polymer Science and Engineering · Vol. 10, Issue 1, 2024 · pp. 16–21 Read article
-
Study the Behavior of Geometric Non-Linearity in High- Rise Building
Abstract: Generally, in any analysis method adopted in the construction industries it should be useful for the stability, economy and strength point of view. For such structures the different analysis method is adopted based on the requirement of the building. From which the structure loads and other loads are coming over the structure are calculated and applied over foundation. But in practical execution the method of working is a little bit …
Published in International Journal of Structural Mechanics and Finite Elements · Vol. 10, Issue 2, 2024 · pp. 1–9 Read article
-
Influence of Compatibilizers on the Morphology, Mechanical, Thermal andRheological Properties of Polypropylene/Organomuscovite Nanocomposites
Abstract: In this study, the effects of two different compatibilizer types-maleated polypropylene and hexamethylenediamine modified maleated polypropylene-on the characteristics of a polypropylene/maleated polypropylene/organo-muscovite clay nanocomposite were investigated. By combining polypropylene with three different levels of organo-muscovite clay content, two distinct compatibilizers were used to make the nanocomposites, each with a fixed amount of 10 weight percent. The compatibilizer's effects on the morphological, mechanical, thermal, and rheological characteristics of nanocomposites were then …
Published in International Journal of Applied Nanotechnology · Vol. 10, Issue 1, 2024 · pp. 25–36 Read article
-
Studies on non-destructive inspection of steel wire ropes
Abstract: Non-destructive tests (NDT) of steel wire ropes under services are experienced to estimate remnant life with reference to new and similar components tested under similar conditions. Inspection by magnetic defect-stray fields’ to gamma radiography for imaging defects in addition, for suspended bridges have been methods of tests to configure defect morphologies in wires. This is beyond standard periodic inspections accounted from constrains of pre broken wires, multi-axial deformation, frictional wear, …
Published in International Journal of Analytical and Applied Chemistry · Vol. 5, Issue 1, 2019 · pp. 43–50 Read article
-
Overview on the Thermal Properties, Geometric Structure and Recycling Process of Thermoplastic Materials.
Abstract: This study is aim to discuss the thermal properties, geometric structure and recycling process of thermoplastic materials. Also, recycling is one of the most important actions currently available to reduce the negative impact on the environment and represent one of the most dynamic areas in plastics industry today. Thermal properties, geometric structure and recycling process of thermoplastic materials deals with the properties of thermoplastics which includes: it may melt before …
Published in International journal of Thermodynamics and Chemical Kinetics · Vol. 6, Issue 2, 2020 · pp. 20–24 Read article
-
Review Study on re-strengthening of reinforced concrete circular column using steel strips
Abstract: This technique fixes thin steel plates i.e. steel encasement or tie plates i.e. steel cage around the column with steel angles at each corner, clamped to the concrete and welded together. Adequate tightening of the jackets can be ensured by means of heat tensioning. The use of steel jackets can enhance the shear strength of columns considerably. However, due to their low flexural stiffness they typically have poor confinement efficiency …
Published in International Journal of Concrete Technology · Vol. 4, Issue 2, 2018 · pp. 1–9 Read article
-
DETAILED STUDY ON THE PROPERTIES OF PLASTIC CONCRETE CUTOFF WALL MATERIALS MIXED WITH WATERPROOFING ADMIXTURES
Abstract: This study presents the results of a comprehensive experimental work performed to characterize the mechanical and hydraulic properties of plastic concrete materials added with water-resisting and crystalline admixture as Permeability Reducing Admixture for Hydrostatic conditions (PRAH). The mechanical properties, deformation, permeability nature, triaxial stress-strain curve, hydration products, phase composition, and pore structure of plastic concrete with various proportions of PRAH were investigated. In addition to that, retarding admixture was used …
Published in International Journal of Concrete Technology · Vol. 9, Issue 1, 2023 · pp. 1–15 Read article
-
An Evaluative Analysis of the Utilization of Artificial Neural Networks in Forecasting Soil Engineering Characteristics: An Overview Study
Abstract: The primary objective of utilizing synthetic neural networks was to emulate the problem-solving approach akin to the human brain. This approach of employing artificial neural networks gained extensive traction within the realm of geotechnical engineering, where the engineering properties of soil play a pivotal role in ensuring the stability of various engineering structures. The primary concern revolves around the strength and deformation characteristics exhibited by soil masses. The focus lies …
Published in International Journal of Geological and Geotechnical Engineering · Vol. 9, Issue 1, 2023 · pp. 55–63 Read article
-
Development of Computer Program for Structural analysis of Flexible Pavement
Abstract: Abstract The main objective of this study is evaluating the distresses (rutting and fatigue) happened in the pavement and determines the effect of several parameters on pavement. This study includes two steps, First experimental work to compute stiffness, rutting parameters and fatigue parameters of three asphaltic layers. Second, was a computer program developed by visual basic languish to evaluating the sensitivity of several parameters (resilient modulus, thickness of layer) on …
Published in International Journal of Structural Engineering and Analysis · Vol. 1, Issue 2, 2015 · pp. 30–38 Read article
-
Analysis of Cracks in Structure and Remedies
Abstract: Cracking the most difficult challenge faced by Engineer is to be carried out as a process of repairs and remedial measures which are to be important for cracks. It is also important to view in particular way of the cause and the access to importance to be taken for prevention. For remedies or restoration of structure to be remain successful in producing a desired result & also necessary that the …
Published in International Journal of Structural Engineering and Analysis · Vol. 4, Issue 1, 2018 · pp. 36–46 Read article
-
Experimental Investigation on Axially Loaded AASC and TVC Square Columns
Abstract: In this present project, an experimental investigation was carried out to study the behaviour of alkali-activated slag concrete (AASC) and traditionally vibrated concrete (TVC) columns under axial loading. The dimensions of the columns were 150 mm × 150 mm × 1219 mm to mimic the short column behaviour. The longitudinal steel ratio was varied for the specimens. Different criteria such as load deformation behaviour, compression stiffness and surface strain were …
Published in International Journal of Structural Engineering and Analysis · Vol. 5, Issue 1, 2019 · pp. 8–17 Read article
-
Thermally Induced Stresses in Cross-Ply Laminated Plates Using Four Variable Theory
Abstract: A thermal analysis of simply supported isotropic, orthotropic, two layer antisymmetric and three layer symmetric composite laminated plates is presented. A four variable trigonometric shear deformation theory is used. This theory has only four unknown variables as compared to other higher order theories with five or more than five unknown variables. This is a displacement based equivalent single layer theory. The in-plane displacement field of this theory consists of trigonometric …
Published in International Journal of Structural Engineering and Analysis · Vol. 6, Issue 2, 2020 · pp. 35–54 Read article
-
Reviewing on the Performance of Masonry, Reinforced Concrete and Underground Tunnels against Blast Loading
Abstract: An explosion on the elevated structures caused by terrorist activities or manmade events can induce significant deformations in the Civil Engineering structures. Therefore, it is necessary to review the response of the structural systems such as masonry structures, reinforced concrete building structures and reinforced concrete tunnel. In order to understand the scope for protecting such a structures and the structural behaviour under blast loading, a detailed literature review is conducted. …
Published in International Journal of Structural Engineering and Analysis · Vol. 7, Issue 1, 2021 · pp. 31–42 Read article
-
MODAL ANALYSIS OF CONVENTIONAL RCC STRUCTURE WITH STEEL BRACING
Abstract: It is a well-known fact that high rise reinforced structures are vulnerable to lateral loadings from things like earthquake and wind stresses. Bracing systems have the excellent benefit of adding just a tiny amount of bulk to the structure while significantly enhancing its performance. Building modelling is done both with and without a bracing system in this study. Analysis that is both linear and dynamic is being done. The structure …
Published in International Journal of Structural Engineering and Analysis · Vol. 9, Issue 1, 2023 · pp. 48–62 Read article
-
RUTTING EVALUATION OF BITUMINOUS MIXES USING WHEEL LOAD TESTERS
Abstract: Abstract: Permanent deformation also known as rutting, is the major mode of distress affecting the service life and performance of bituminous pavements. Rutting occurs due to excessive stresses on subgrade, inadequate strength of bituminous mix, inadequate thickness of pavement layers or poor construction methods. Among these causes, quality of bituminous mix is one of the main factors that contribute towards rutting failure.There are several test methods like Uniaxial tests, Triaxial …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 6, Issue 2, 2020 · pp. 41–46 Read article
-
Fluctuation of the Viscoelastic Properties of Asphalt Concrete under Variable Strain Level
Abstract: The viscoelastic properties of asphalt pavement usually practices variable microstrain levels due to the mixed traffic loading throughout its service life. In the present assessment, asphalt concrete mixtures were prepared in the laboratory at optimum binder content, and compacted in a slab mold using the roller compaction. Beam specimens of 5.6 Cm depth, 6.2 Cm width, and 40 Cm length; have been extracted from the slab samples and subjected to …
Published in International Journal of Transportation Engineering and Traffic System · Vol. 9, Issue 2, 2023 · pp. 8–16 Read article
-
Modelling and Analysis of Pressure Distribution of a Honing Machine Tool
Abstract: In the honing machining process it is very important that tool should with stand the pressure to create the pattern inside the cylinder. This project deals with the reverse engineering process, and selecting the appropriate pressure for honing tool and simulations are done at different pressure readings and the result of Forces on the component so that the productivity of the machine is improved. To achieve this we take a …
Published in International Journal of Analog Integrated Circuits · Vol. 4, Issue 2, 2018 · pp. 43–50 Read article
-
Analysis of Prefluxing Method for Transformer Inrush Current Reduction
Abstract: Inrush Current is a harmonic-rich current which flows in transformer when it is energized. Inrush current affect the winding of transformer by means of its structural deformation, induce the voltage distortion, and reduce the power quality. There are number of methods available for transformer inrush current’s reduction. Among them, the latest and emerging method is the prefluxing method. In this paper, same has been explained with its results of simulations …
Published in International Journal of Power Electronics Controllers and Converters · Vol. 8, Issue 1, 2022 Read article
-
Characterization and Wear Behavior of TiN, TiAlN, TiCrN and AlCrN PVD Coatings Deposited onto AISI H13 Hot Forging Die Steel
Abstract: Four Nitride coatings TiN, TiAlN, TiCrN and AlCrN were deposited onto AISI H13 hot work die steel by cathodic arc evaporation physical vapour deposition (PVD) technique. The coatings were characterized by SEM, SEM-EDS, XRD, line scan EDS and X-Ray mapping tests and micro hardness tester. The wear characteristics were investigated using a pin on disc method at high temperature and speed against En-31 bearing steel disc. It was observed that …
Published in International Journal of Metallurgy and Alloys · Vol. 4, Issue 2, 2018 · pp. 1–11 Read article
-
Floral System Act as a Reservoir for Nanobiotechnology (Silver Nanoparticles)
Abstract: The coming era of Nanotechnology is considered the first book on the topic of nanotechnology. It consists of processing of separation, consolidation and deformation of materials by one atom or by one molecule. There are two main approaches used in nanotechnology such as 1) “bottom-up” approach in which materials or devices are built from components and assemble themselves chemically by the principles of molecular recognition 2) “top-down” approach reflects the …
Published in International journal of Nanobiotechnology · Vol. 1, Issue 1-2, 2015 · pp. 5–7 Read article